How do I use "ping" to check my Oscilloscope’s Ethernet LAN connection is working correctly?

Q: How do I use "ping" to check my Oscilloscope’s Ethernet LAN connection is working correctly?

In Windows 2000 or Windows XP click on Start select Run in the “Open: window” type cmd thenclick OK . At the prompt type ping&lt;space&gt;&lt;name or IP address&gt; of the networked computer used to test the connection. Verify the scope sends / receives four packets then at the prompt type exit to close the command window. Example of a successful test connection:

Question :

Réponses :

In Windows 2000 or Windows XP click on Start select Run in the “Open: window” type cmd thenclick OK. At the prompt type ping<space><name or IP address> of the networked computer used to test the connection. Verify the scope sends / receives four packets then at the prompt type exit to close the command window.

Example of a successful test connection:

Cette FAQ concerne :

Aucune série du produit

Produit :

Numéro de la FAQ 60746

Afficher toutes les FAQ »