Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

What video formats and video references are supported by the WFM700/7000 series and WVR7100 series waveform monitors?

Question :

What video formats and video references are supported by the WFM700/7000 series and WVR7100 series waveform monitors?

Réponses :

The table shown below indicates which video formats are supported by the WFM series and WVR series. The WVR7100 and WFM7000 series supports some video formats that aren't supported by the WFM700 series.

StandardImage FormatField/Frame Rate
 60 Hz
spacer
59.94 Hz
spacer
50 Hz
spacer
30 Hz
spacer
29.97 Hz
spacer
25 Hz
spacer
24 Hz
spacer
23.98 Hz
spacer
274M1920x1080iX
(D-292)1
X
(E-292)1
X
(F-292)1
     
 1920x1080p   X
(G-292)1
X
(H-292)1
X
(I-292)1
X
(J-292)1
X
(K-292)1
 1920x1080sf   X2X2X2XX
 
240M/260M1920x1035iX
(A-292)1
X
(B-292)1
      
296M1280x720pX
(M-292)1
X
(M-292)1
XX4X4X4XX
ITU-R BT.601720x575i (625)  X
(C-259)3
     
 720x483i (525) X
(C-259)3
      

1 SMPTE 292M format support
2 These segmented frame format signals are detected as their corresponding interfaced format.
3 SMPTE 259M support level C - 270 Mb/s, 525/625 component
4 These format are only supported by the WVR7100.

Note: The WFM700 does not use the SMPTE 318M 10 Field Sequence flag. This causes inconsistent operation for combinations of input and reference signal formats whose frame rates are not related by an integer multiplier. Multiple possible timing orientations may be shown on the Wavefrom, resulting in a display similar to that shown when a timing offset is present. The number of displayed timing orientations is related to the ratio of the input and reference frame rates.

For every video format that can be monitored by the WFM700/7000 series and WVR7100 series there are a number of specific video formats that can be used as an external reference in the waveform monitor. The table shown below indicates which reference signals can be used each video format.

Input Fomat, digitalAllowed References, analog
 Bi-level syncTri-level sync     
 NTSCPAL720p1080p/sf1080i
 59.94 Hz
spacer
50 Hz
spacer
50 Hz
spacer
59.94 Hz
spacer
60 Hz
spacer
23.98 Hz
spacer
24 Hz
spacer
50 Hz
spacer
59.94 Hz
spacer
60 Hz
spacer
274M, 1080i, 60 Hz    X 4 X 4  X
274M, 1080i, 59.94 HzX  X 1    X 
274M, 1080i, 50 Hz XX 4    X  
274M, 1080p, 30 Hz    X 4    X
274M, 1080p, 29.97 HzX  X 1    X 
274M, 1080p, 25 Hz XX 4    X  
274M, 1080p, 24 Hz    X 4 X  X 2
274M, 1080p, 23.98 HzX 2  X 2 X  X 2 
RP211, 1080sf, 30 Hz    X 4    X
RP211, 1080sf, 29.97 HzX  X 1    X 
RP211, 1080sf, 25 Hz XX 4    X  
RP211, 1080sf, 24 Hz    X 4 X  X 2
RP211, 1080sf, 23.98 HzX 2  X 2 X  X 2 
240M 1035i, 60 Hz    X 4 X 4  X
240M 1035i, 59.94 HzX  X 4    X 
296M 720p 60 Hz    X 4 X 4  X
296M 720p 59.94 HzX 3  X X 4  X 3 
296M 720p 50 Hz XX 4    X  
296M 720p 30 Hz    X 4    X 4
296M 720p 29.97 HzX 4  X 4    X 4 
296M 720p 25 Hz X 4X 4    X 4  
296M 720p 24 Hz    X 4 X  X 2
296M 720p 23.98 HzX 2  X 2 X  X 2 
BT601 483i, 59.94 Hz (525)X  X    X 
BT601 576i, 50 Hz (625) XX 4    X  

1 Digital input frame rate is divided by a factor of two in WFM700 series.
2 Every fifth frame of reference matches the fourth frame digital input.
3 Reference frame rate is divided by a factor of two.
4 Only the WVR7100 or WVR6100 is able to lock to this reference signal.


Cette FAQ concerne :

Aucune série du produit

Produit :

Numéro de la FAQ 57916

Afficher toutes les FAQ »