What are the available features on the old TDS500 and TDS700 scopes?

Question:

What are the available features on the old TDS500 and TDS700 scopes?

Answer:

ModelDate/F. W. Ver/SN Features added

TDS540

TDS520

6/1/91, v1.0Introduction. 500 MHz, 15 k record, 50 k option, 250 MS/s/channel sample rate; state, pattern, width, glitch, runt triggering.

TDS540

TDS520

4/6/92, v2.0,Cursor improvement; Area, cycle, and phase auto measurements; measurement gating and snapshot, EPS hardcopy, TekSecure, Pass/fail test, delay-by-events-then-time, TIFF hardcopy, Intensified samples, single-shot button, trig. level bars.

TDS540

TDS520

6/1/92, v2.0,

Option 2F introduction, FFT. 

Option 13 printer interface introduction (RS232 and Centronics ports).

TDS544A3/15/93, Color  Display, floppy disk drive, video trigger option, FastFrame, math averaging and template testing, Fit-to-Screenrecord length waveform viewing, VGA output, printer interfaces standard.
TDS544A4/25/93FFT standard
TDS524A7/12/93Introduction

TDS540A

TDS520A

7/12/93video trigger option, FastFrame, math averaging and template testing, Fit-to-Screen record length waveform viewing, Monochrome VGA output, clock/calender, Options available: Floppy disk, video trigger.

TDS544A

TDS540A

5/2/94, B012170

5/2/94, B010670

Standard record length increased to 50 k.
TDS7446/15/94Introduction. ReplacedTDS544A.  500 MS/s/channel, max 1 GS/s on 1 channel, option 1M = 130 k/ch, 1 ns peak detect, Slew rate, Set-up-and-hold trigger, 400 Hz power supply.

TDS744A

TDS784A

11/1/94InstaVu, 500 k record length on one channel with option 1M, 1 GHz bandwidth and 4 GS/s sample rate on TDS784A, with 1 GS/s on each channel.

TDS520A

TDS524A

5/29/9550 k record length per channel standard.

This FAQ Applies to:

Product: TDS520A, TDS540, TDS540A, TDS744, TDS524A, TDS544A, TDS744A, TDS784A

FAQ ID : 64006

View all FAQs »
Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top