Switch Time between Pulse IV and CV measurements using the 4225-RPM.


What is the time required to switch between Pulse IV (4225PMU) and CV (4210ACVU) measurements using the 4225-RPM for the 4200A-SCS?


The RPM eliminates the need to re-cable and increases switching speed between Pulsed IV and CV measurements.  However, we do not specify the switching time for the RPMs in the data sheets.

A simple test using a MDO3102 yeided the below approximate switch times:
CVU to PMU measurements through RPM = 460ms.
PMU to CVU measurements through RPM = 1700ms.

This FAQ Applies to:

Product Series: Keithley 4200A-SCS Parameter Analyzer

Product: 4200A-SCS

FAQ ID : 469646

View all FAQs »

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top