I'm using a P6419/P68xx probe and it came with a thick and a thin elastomer. How do I know which one I should use?

Question:

I'm using a P6419/P68xx probe and it came with a thick and a thin elastomer. How do I know which one I should use?

Answer:

If the PCB thickness is 1.27 mm to 2.36 mm (0.050 in to 0.093 in), use the nut bar with the thin elastomer.
If the PCB thickness is 2.36 mm to 3.81 mm (0.093 in to 0.150 in), use the press-in nut with the thick elastomer.

This FAQ Applies to:

Product Series: Logic Analyzer Probe

Product: P6860, P6880, P6864, P6419

FAQ ID : 52876

View all FAQs »
Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top