How to take and store data using KI-TOOL with Model 2110 DMM.

Question:

How to take and store data using KI-TOOL with Model 2110 DMM.

Answer:

First, Here is a procedure to save data into a record.

1. Click on the Operation tab.
2. Select Multiple readings.
3. Select a Record (e.g. Record 1)
4. Select number of Readings (e.g. 10)
5. Click on Start Reading.
6. Click on Exit when readings are completed.

Second, now view the readings.
1. Click on Record tab.
2. Select View Record.
3. Click on the record just saved.
4. Now should see the values in the table.
5. Now click on Output to CSV.
6. Select file location and enter a name for the file and click on Save.

This FAQ Applies to:

Product Series: Keithley 2110 Series: 5½-Digit Dual-Display USB Multimeter

Product: 2110-100, 2110-100-GPIB, 2110-120, 2110-120-GPIB, 2110-220, 2110-220-GPIB, 2110-240, 2110-240-GPIB

FAQ ID : 704701

View all FAQs »
Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top