Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?

Question :

Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?

Réponses :

Yes, almost all work from all legacy MSO/DPO/MDO4000/B series scopes. The only one that has some requirements is the MDO4TRIG which requires a spectrum analyzer option MDO4SA3 or MDO4SA6 be installed on your MDO4000C before RF triggering capabilities would work. Otherwise all modules are compatible on this new oscilloscope. |

Note: MSO/DPO/MDO3000 Series modules are not compatible on the 4000 Series. 

Note 2: ≥350 MHz bandwidth models are recommended for 100BASE-TX; USB high-speed supported only on models with 1 GHz analog channel bandwidth.

For further questions, please reach out to our Technical Support Center by pressing the 'Contact Us' button on the right of the screen.


Cette FAQ concerne :

Série du produit : MDO4000 MSO4000/DPO4000

Produit :

Numéro de la FAQ 72146

Afficher toutes les FAQ »