Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Custom Math Waveforms using Matlab and ADK on an Oscilloscope

Question :

Custom Math Waveforms using Matlab and ADK on an Oscilloscope

Réponses :

The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files. 

Equipment list:

  • Windows 7 oscilloscope with firmware version 6.4 or later
  • MATLAB with the Instrument Control Toolbox or any other toolboxes you will use (e.g. Signal Processing Toolbox).

 

This example will show you how to update a txt file using the Application Development Kit (ADK) with values for your cutoff frequency. Then using a custom MATLAB filter file it will read in the values from this txt file and apply the appropriate butter worth 3rd order filter with corresponding cutoff frequencies. 

 


Cette FAQ concerne :

Série du produit : DPO7000 MSO/DPO70000 MSO5000 / DPO5000

Produit :

Numéro de la FAQ 64766

Afficher toutes les FAQ »