Analyseur de spectre USB RSA306B

L’analyseur de spectre USB RSA306B est peut-être petit, mais il est très puissant. Il regorge de caractéristiques habituellement réservées aux analyseurs de spectre deux fois plus volumineux et deux fois plus chers. Parfait pour les tâches du quotidien.

Gamme de fréquences maximum

De 9 kHz à 6,2 GHz

Bande passante de capture

40 MHz

Plage dynamique

-160 dBm à +20 dBm

 

Voir plus avec la technologie DPX® propriétaire

Thumbnail

Découvrez les problèmes les plus complexes et difficiles à trouver avec la puissante architecture en temps réel de la série RSA. Grâce à la technologie DPX® avancée, vous pouvez voir les caractéristiques RF pratiquement invisibles pour un analyseur de spectre conventionnel.

Puissant et intuitif. Aperçu des mesures à portée de main.

Thumbnail

La gamme RSA repose sur le logiciel SignalVu® Essentials : le même logiciel utilisé sur la gamme complète des analyseurs de spectre en temps réel Tektronix. Fournir un accès illimité aux capacités avancées de mesure et d’analyse que vous pouvez sauvegarder, personnaliser ou partager avec vos pairs. Plus de 15 applications logicielles couvrent les normes sans fil, la gestion du spectre, les mesures de pulses et plus encore.

Des performances sans compromis.

Thumbnail

La gamme RSA offre des performances adaptées aux analyseurs de spectre de milieu de gamme conventionnels sur le marché. Vous ne devez faire aucun compromis, même pour vos défis les plus difficiles.

Taille inégalée. Flexibilité illimitée. Robustesse sans précédent.

Thumbnail

Ne pesant que 725 g, le modèle RSA306B est facile à transporter, qu’il s’agisse de l’utiliser sur votre table, en laboratoire ou même sur le terrain. Il est alimenté par votre ordinateur portable ou votre tablette, vous offrant ainsi une flexibilité et une commodité optimales. Vous choisissez l’affichage et la connectivité que vous préférez. De plus, le modèle RSA306B a été testé selon les normes militaires et est très résistant.

Regardez le test extrême

Rencontrez toute la gamme

Thumbnail

La gamme d’analyseurs de spectre Tektronix est fabriquée aux États-Unis et bénéficie d’une garantie de 3 ans. Vous pouvez donc compter sur notre qualité jour après jour. Choisissez l’analyseur de spectre en temps réel qui correspond le mieux à vos besoins :

  • Gamme RSA500 : grâce à un générateur de suivi intégré pour les tests d’antenne et de câble, et à un récepteur GPS pour géolocaliser et cartographier les signaux, le modèle RSA500 facilite grandement les tests sur le terrain.
    En savoir plus>>
  • Gamme RSA600 : avec une meilleure plage dynamique et un bruit de phase optimal pour l’analyse de modulation des normes sans fil, et un générateur de suivi en option permettant de caractériser les composants RF, le modèle RSA600 offre des outils puissants pour votre table.
    En savoir plus>>

Des accidents surviennent. Vérifiez que vous êtes protégé.

Nous sommes les seuls à offrir une couverture pour les dommages accidentels. Oui, cette garantie couvre les détériorations de l’écran, les dommages consécutifs aux chutes, les supports cassés, les conséquences des décharges électrostatiques ou des surtensions électriques. Limitez les réparations imprévues ou les coûts de remplacement grâce à notre forfait Total Protection.

En savoir plus

Modèle Gamme de fréquences Bande passante en temps réel Durée minimale de l’événement pour 100 % de probabilité d’interception Gamme dynamique (typique) Tarif
RSA306B De 9 kHz à 6,2 GHz 40 MHz 100 μs 60 dBc US $4,480
Configuration et devis

Surveillance des spectres et recherche d’interférences

La migration vers les communications mobiles crée une pression sans précédent pour plus de capacité de spectre dans un environnement de signaux complexe et encombré. Les analyseurs de spectre en temps réel de Tek vous aident à découvrir et à examiner rapidement les sources d’interférence afin que vous puissiez localiser et identifier les activités indésirables. Vous pouvez garantir l’intégrité de votre signal et le respect des normes de conformité en utilisant le modèle RSA306B, le modèle RSA500 ou le modèle RSA600 pour des aperçus de spectre en temps réel.

Points forts

  • La technologie DPX propriétaire de l’analyseur de spectre RSA306B permet des mesures précises et en temps réel dans une interface logicielle avec un format compact, portable et facile à utiliser.
  • L’analyseur de spectre RSA306B couvre jusqu’à 6,2 GHz, avec une capture de bande passante de 40 MHz

Réduisez les coûts de fabrication et la durée des tests avec une meilleure flexibilité de test

Les analyseurs de spectre RSA USB sont un excellent choix pour les fabricants qui recherchent un débit et une qualité de produit supérieurs, tout en contrôlant les coûts de test. Les unités RSA 306B, 500 et 600 prennent en charge les principales normes IoT (Internet of Things) du logiciel SignalVu-PC, offrent une gamme complète de pilotes et d’exemples de code, et prennent en charge le test des technologies IoT telles que le WiFi et le nouveau Bluetooth 5.0.

Maximisez l’apprentissage de vos étudiants

Grâce à nos analyseurs de spectre en temps réel complets et abordables, vos étudiants peuvent capturer les résultats d’expériences, effectuer des analyses et générer des rapports de laboratoire sur leurs ordinateurs portables, ce qui permet de gagner du temps et d’optimiser les opportunités d’apprentissage. Sa taille compacte et portable facilite la réalisation d’expériences loin du laboratoire dans des environnements réels.

Tests de pré-conformité EMI/EMC

Réduisez les coûts et gagnez un temps précieux en effectuant des tests de pré-conformité dans votre laboratoire avec nos analyseurs de spectre en temps réel. Vous pouvez utiliser la détection de crête avec une version gratuite de SignalVu-PC. Vous obtenez également des résultats plus précis avec une détection de quasi-crête et une détection moyenne.

Modèle Gamme de fréquences Bande passante en temps réel Durée minimale de l’événement pour 100 % de probabilité d’interception Gamme dynamique (typique) Tarif
RSA306B De 9 kHz à 6,2 GHz 40 MHz 100 μs 60 dBc US $4,480
Configuration et devis
  Tektronix
RSA306B
Tektronix
RSA507A
Tektronix
RSA607A
Keysight
N9322C (BSA)
Keysight
N9000-507 (CXA)
Gamme de fréquences maximum 9 kHz à 6,2 GHz 9 kHz à 7,5 GHz 9 kHz à 7,5 GHz De 9 kHz à 7 GHz De 9 kHz à 7,5 GHz
Bande passante de capture 40 MHz 40 MHz 40 MHz 1 MHz Standard : 10 MHz
En option : 25 MHz
Plage dynamique
(Niveau de bruit moyen affiché (DANL) à entrée max)
-160 dBm à +23 dBm -161 dBm à +33 dBm -161 dBm à +33 dBm -152 dBm à +20 dBm -148 dBm à + 15 dBm (préamplificateur en option activé)
Bruit de phase (1 GHz CF, décalage de 10 kHz) -84 dBc/Hz -94 dBc/Hz -94 dBc/Hz -90 dBc/Hz (standard) -102 dBc/Hz
Capacités en temps réel Oui Oui Oui Non Non
Mesures de base 17 17 17 6 10
Pays d’origine États-Unis États-Unis États-Unis Malaisie Malaisie
Garantie 3 ans de garantie 3 ans de garantie 3 ans de garantie 3 ans de garantie 3 ans de garantie
Poids 725 g 3,17 kg 2,88 kg 7,89 kg 15,42 kg
Dimension (h, l, p) 3,05 cm x 19,05 cm x 12,7 cm 6,73 cm x 29,92 cm x 27,12 cm 7,49 cm x 35,86 cm x 22,22 cm 13,21 cm x 39,88 cm x 32,04 cm 17,78 cm x 42,67 cm x 36,83 cm

Le logiciel SignalVu-PC apporte des fonctionnalités de banc d’essai et de terrain au modèle RSA306B

Thumbnail

Le modèle RSA306B fonctionne avec SignalVu-PC, un programme puissant qui est la base des analyseurs de signaux de performance Tektronix. Le logiciel contrôle l’acquisition de l’analyseur de spectre et met à jour les affichages de mesure en continu.

La version de base est livrée gratuitement avec le produit ; ajoutez des options pour configurer le logiciel pour votre application.

Points forts

  • La version de base gratuite comprend 17 analyses de signaux et des mesures d’analyse de spectre en temps réel
  • Options supplémentaires payantes pour plus de 15 mesures avancées, y compris les tests WLAN, les tests de conformité P25, l’analyse de pulses, l’analyse de modulation et plus encore

 

ACCESSOIRE VEDETTE

Contrôleur d’instrument Panasonic avec SignalVu-PC

Thumbnail

Associé à un analyseur de spectre USB Tektronix, le modèle Panasonic FZ-G1 proposé par Tektronix transforme votre affichage du spectre sur le terrain. Il fournit le plus grand écran de toute solution portable et ne pèse qu’une fraction d’un analyseur de spectre portable traditionnel.

Points forts

  • Pré-chargé avec le logiciel SignalVu-PC
  • Les paramètres d’affichage personnalisés et les boutons de la face avant optimisent l’expérience de SignalVu-PC
  • Testé par Tektronix pour répondre aux performances en temps réel de tous les analyseurs de spectre USB

ACCESSOIRE VEDETTE

Antenne intelligente pour la recherche d’interférences

Thumbnail

Associée à un analyseur de spectre USB Tektronix, l’antenne de recherche de direction Alaris DF-A0047, proposée par Tektronix, facilite la recherche d’interférences. Les lignes de relèvement sont automatiquement transmises de l’antenne au logiciel SignalVu-PC Map, permettant une triangulation rapide des sources d’interférence.

Points forts

  • Plusieurs antennes et un préamplificateur sélectionnable par l’utilisateur couvrent une large gamme de fréquences et de niveaux d’interférence
  • La boussole intégrée transmet les informations d’angle à SignalVu-PC pour la création automatique de lignes de relèvement sur la carte
  • Alimentation par USB

 

The RSA306 and SignalVu-PC software running on a PC provide powerful USB Spectrum Analysis capabilities. In this brief video, you will see how the this instrument can help you see signals that you …
2m 58s
Discover how the RSA306 can help you find interference faster than any other instruments.
2m 1s
Watch this video to see how to test Bluetooth parameters for the physical layer using the RSA607A USB Real-Time Spectrum Analyzer with SignalVu-PC software.
4m 33s
All Tektronix USB Portable Analyzers are tested to Military Standards but we wanted to see what they were really capable of. Could our spectrum analyzers survive a 1st story drop? A truck? A …
2m 57s
DataVu-PC has tools like frequency mask, pulse descriptor words and smart markers, to help you find any needle in any size haystack. Your data recordings can be 10’s or 100’s of gigabytes in size …
5m 20s
Watch this video to see how to perform a radiated EMI pre-compliance test, to ensure your device complies with the WLAN IEEE 802.11 standards, using the RSA607A and SignalVu-PC software.
8m 33s
Limit line testing in a Spectrum Analyzer is an important feature for a variety of applications. Examples include EMI Pre Compliance and Diagnostics, so that the Design Engineer can save pain and …
2m 18s
Pass EMI Compliance the first time by pre-testing your Bluetooth device in your own lab, using a USB Real-Time Spectrum Analyzer and SignalVu-PC software.
6m 23s
Discover the new member of the RSA spectrum analyzer family. A full featured analyzer for half the price of a conventional unit. Watching this 1 minute video will change the way you see spectrum …
1m 9s
Perform a quick EMI pre-compliance test of your Internet of Things device and have the confidence that you’ll pass final EMI Compliance Testing. This test is performed using the RSA607B controlled …
6m 4s
Teach RF beyond the basics and beyond the lab with the RSA306.
1m 40s
Learn how to conduct wireless LAN parametric RF testing for the physical layer against the IEEE 802.11 standards, using the RSA607A Real-Time Spectrum Analyzer controlled from a PC powered by …
7m 59s
Get RF analysis power in the palm of your hand at an unmatched price with the RSA306B. Small on price and big on performance the RSA306B now has improved dynamic range and a 3-year warranty.
1m 21s
In this video we compare EMI compliance results obtained using a full Compliance Receiver set-up versus a low-cost approach using a Tektronix RSA Spectrum Analyzer. You’ll see how these results …
10m 7s
It’s useful to ensure that your ZigBee Radio RF module is turning on correctly before you integrate it into a ZigBee device. See how to perform this test with your PC using the RSA607A and …
7m 36s
Don’t fail EMC. Using the Tektronix Real-Time Spectrum analyzer with DPX ®technology, you can see signals under signals and signals under noise. This enhanced insight allows you to identify EMI …
5m 50s
Watch this video for a quick demonstration of the main features of DataVu-PC. Using the demonstration file included with the software, you’ll see the three main analysis screens, playback controls …
4m 4s
In the fast growing wireless design and Internet of Things market, the importance of choosing the right wireless RF module is vital to your design and overall company’s success.In this webinar …
25m 15s
Get the full featured spectrum analyzers you need in one small, low price package. Whether your analysis takes you to the field or the lab, from interference hunting and spectrum management to …
1m 26s
This step by step video will show you the quickest path between removing the RSA306 USB Spectrum Analyzer from the box and making measurements. 
4m 54s
Learn how to perform a parametric test covered by the ZigBee standard, including modulation quality and error vector magnitude measurements as well as spectrum emissions mask, signal quality and …
5m 17s
Sometimes bad things happen to good scopes!  Ensure you've got it covered with a Total Product Protection plan from Tektronix, the only coverage plan available for test equipment with accident …
1m 2s
Make sure you’re getting good signal strength from your wireless LAN device by testing for first turn on using a Tektronix RSA607A controlled by your PC and SignalVu-PC software.
6m 49s
Learn how to properly measure the Channel Power of a pulsed RF signal using a real-time spectrum analyzer. By properly setting up the analysis settings, the channel power of the RF pulse, as well …
3:18
Learn how to test that your Bluetooth device is turning on and transmitting correctly, using a RSA607A real-time spectrum analyzer controlled by SignalVu-PC software.
7m 28s
Analog modulation is still often used today for some lower cost RF devises as well as legacy communications and broadcast networks. A proven technology, but there still a need to test these kinds …
3m 18s
eGuide to RF Signals
The eGuide to Signals will help you navigate the RF spectrum and gain a better understanding about what kinds of signals might be present around you. Detailed examples are provided for popular signals often transmitted over the air. Examples of …
Manuel d’instructions
Interference Hunting Application Note
This application note is an overview of interference hunting techniques and examples of how to successfully excute them using real-time spectrum analyzers. 

Numéro du document : 37W-60877-0
Note d’application
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces …

Numéro du document : 37W-23378-4
Note d’application
Fast 3D EMC/EMI Scan with Detectus Scanning System and Tektronix Real Time Spectrum Analyzers
With the increasing adoption of wide-bandgap based devices, power supplies are shifting to faster high voltage and high current switching waveforms that generate electromagnetic interference (EMI) in conducted and radiated emissions. A critical …

Numéro du document : 37W-61511-0
Étude de cas
Improve Your Wireless and RF Classes with Live Signals
Today’s graduating electrical engineers need marketable skills which are typically not developed in undergraduate curricula. More and more educators see the value of utilizing more hands-on activities to improve a student’s understanding of …

Numéro du document : 37T-30932-0
Étude de cas
RF Recording and Playback Solutions
Introduction to RF Record and Playback Spectrum management, RF interference analysis, signal acquisition, product testing and validation, RF system design, communication security, and academic research, all routinely perform or can benefit from the …

Numéro du document : 37W-61289-0
Note d’application
Solutions for Aerospace and Defense
Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.

Numéro du document : 46A-61169-2
Brochure
Understanding Radar Signals Using Real-Time Spectrum Analyzers
The transient nature of radar pulses combined with modern pulse compression schemes often demand carefully designed test setups. This Primer will cover measurements methods, choosing your measurement parameters, how to find the pulse, estimating the …

Numéro du document : 76W-61318-2
Guide de présentation
How to open saved RSA306/B, RSA500 or RSA600 Series .r3a or .r3f files in MATLAB?
Option 1: You can play back .r3f files with Tektronix SignalVu-PC VSA software application (version 3.6.0043 or greater).  The base SignalVu-PC VSA software is a free program and is available for download at www.tektronix.com/downloads (search for …
Numéro de la FAQ69531
The Green LED on my RSAXXX is on, but I cannot connect to SignalVu-PC?  
After installation of SignalVu-PC and the Tektronix USB driver, I cannot get the instrument to be found with SignalVu-PC. Note: The first time connecting to the instrument may require up to 30 seconds for SignalVu-PC to find the instrument …
Numéro de la FAQ251141
As a Windows C/C++ DLL, the RSA API can be used in many C/C++ development environments including National Instruments LabWindows/CVI.  However, due to the way LabWindows/CVI 2010 handles the loading of external .DLLs, the compiled executable will experience a fatal run-time error.  When this occurs you will receive a message like the following:FATAL RUN-TIME ERRORUnknown source position, thread id 0x0000XXXXA non-debuggable thread caused a ‘General Protection’ fault at address 0xXXXXXXXX.Please note: this issue has been confirmed to exist in LabWindows/CVI 2010 and may exist in other versions of LabWindows/CVI as well.  LabWindows/CVI 2015 has shown not to exhibit this problem.
National Instrument has confirmed this issue with other external libraries and has written up a KnowledgeBase article showing how to fix the issue.  You can read this article at the following URL.http://digital.ni.com/public …
Numéro de la FAQ72206
What is the part number for the RSA306/306B, RSA503A/507A, RSA603A/607A demo kit?
Part number for the demo kit is RSA-DKIT The demo manual can be found here: https://www.tek.com/spectrum-analyzer/rsa306-usb-manual-2
Numéro de la FAQ72176
How can I tell if my PC or labtop supports USB 3.0?
The best way is to ask Windows.  In Windows 7, from the Start button, open Control Panel and select Device Manager.  In Windows 8, search on ‘Device Manager’, select it and look for USB 3.0 as shown belowThe USB installation is detailed in Universal …
Numéro de la FAQ69441
How can I tell if the RSA306 is connected?
When first attached to your computer, the RSA306 status light is red and it begins installing the RSA306 Device Drivers.  When the drivers are installed, the RSA306 internally boots up and its light turns green.  (This takes about 5 seconds.)  When …
Numéro de la FAQ69446
What do the red/green lights on the RSA306 indicate?
Solid Green:  Instrument has finished boot-up up and is ready to connect or operate.Red: Unable to power up, or re-booting the instrumentFlashing green: Transferring data
Numéro de la FAQ69451
What if my disk drive doesn't meet the write-speed requirement for my RSA306?
If a disk drive with streaming storage rates <300 MB/sec is used, you will not be able to stream data to the drive without gaps.  The unit will still write to the drive, but it will not be seamless.  All other functions will work, including capturing …
Numéro de la FAQ69421
When using SignalVu-PC how do I find my system's Host ID?  
To find the Host Id while using SignalVu-PC select Tools > Licenses > Manage. This will open the Manage Licenses window. Under the Select license host window on the left choose the system that you wish to view the Host ID. <> refers …
Numéro de la FAQ474071
How do I tell if my RSAxxx has successfully connecting to my computer?
Watch the USB status LED when you first plug in the USB cable. See actions below: Note: When you first connect the USB cable to a PC USB 3 port (for the first time) this light may be red for up to up to maybe one minute as the USB driver is installed …
Numéro de la FAQ251136
After installation of SignalVu-PC and the Tektronix RSA306 USB driver, I cannot get the instrument to be found with SignalVu-PC Live Link.
In older PCs, the latest manufacturer’s drivers for the PC and for the processor may need to be installed.  Check on the website of your PC manufacturer and at the Intel website for the latest drivers for your PC.
Numéro de la FAQ69431
What PC should I get to work with the RSA306?
Any PC that meets the performance requirements should work.  Tektronix doesn’t make a specific recommendation, but a list of models we’ve evaluated is shown below.  In one case, we’ve found an Intel core i5-based tablet (Surface 3 Pro) that does meet …
Numéro de la FAQ69416
What is the difference between the RSA306 and the RSA306B? 
The primary differences between RSA306 and RSA306B are the RSA306B has the following improvements: Residual spurious improved by 10 dB overall and >40 dB at select frequencies Spurious with signal improved by 10 dB up to 3 GHz to -60 dBc Amplitude …
Numéro de la FAQ474076
After installing SignalVu-PC I encounter the following error. SignalVu-PC Error 1722. There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor.  Action RegisterSidewinder, location: C:\Program Files\Tektronix\SignalVu-PC\, command: "C:\Program Files\Tektronix\SignalVu-PC\SignalVu-PC.exe" /register
There can be several reasons for the 1722 error.  The most common are:   1. In Dot Net 4.5 or greater installed?  If not try installing Dot Net 4.5 or higher.   2.  If you have Dot Net 4.5 or greater try repairing Dot Net Framework 4.5 on Windows …
Numéro de la FAQ72236
 What’s the longest USB 3.0 cable I can use with the RSA306?
The instrument ships with a 1M USB 3.0 cable.  If a longer cable is needed, purchase a high quality cable.  The RSA306 is powered by the USB 3.0 cable, and draws about 800 milliamps when operating.  Lower quality cables may have higher resistance …
Numéro de la FAQ69436
Where do I get the USB driver for the RSA306?
It is installed when you install SignalVu-PC SVE or the application programming interface.  The driver is also available separately on the USB thumb-drive included with the RSA306 .
Numéro de la FAQ69426
Can I communicate with multiple USB RSAs Simultaneously?
Yes there are two options to communicate with multiple RSA's: Two USB RSA's can be controlled through the software DataVu-PC. DataVu-PC offers recording using two RSAs so that you can operate at two independent frequencies and spans simultaneously …
Numéro de la FAQ773771
Can I record data from two USB RSA’s at the same time?
Yes recording of streaming data is possible up to 40MHz bandwidth for either free running or triggered data, using DataVu-PC with the RSA500A, RSA600A, or RSA306B’s. Playback Information – The FFT time, sample time resolution, resolution bandwidth …
Numéro de la FAQ474116
 Can I connect to two USB RSA's at the same time?
Using DataVu-PC you can indeed connect to two RSA500A, RSA600A, or RSA306B’s concurrently. Both SA’s need USB3.0 connections and adequate throughput, then you can select RSA LiveVu 1 and 2. Trial licenses for DataVu-PC functionality can be found …
Numéro de la FAQ474111
What are the PC hardware requirements to run the RSA306 with SignalVu-PC or the API?
A PC with Windows 7, Windows 8/ 8.1 64-bit operating system and a USB 3.0 connection is required for operation of the RSA306. 8 GB RAM and 20 GB free drive space is required for installation of SignalVu-PC.  For full performance of the real time …
Numéro de la FAQ69411
RSA306, RSA306B, and RSA500A/600A
Spectrum Analyzer Application Programming Interface (API)

This document contains the API function calls to interface with the RSA306, RSA306B, RSA500A Series, and RSA600A Series Spectrum Analyzers through Microsoft Windows.
Numéro de référence : 077103105
Programmation
SignalVu-PC
Vector Signal Analysis Software

Provides in-depth information on how to use the SignalVu-PC Vector Signal Analysis Software. This PDF version of the Help contains the most complete descriptions of how to use the base software and all of its optional applications.
Numéro de référence : 077072015
Aide en ligne
DPX Acquisition Technology for Spectrum Analyzers Fundamentals
Tektronix' patented Digital Phosphor technology or DPX® is used in our Real-Time Spectrum Analyzers (RTSAs), to reveal signal details that are completely missed by conventional spectrum analyzers and vector signal analyzers. The full-motion DPX …

Numéro du document : 37W_19638_7
Guide de présentation
Fundamentals of Real-Time Spectrum Analysis
Engineers and scientists have been looking for innovative uses for RF technology ever since the 1860s, when James Clerk Maxwell mathematically predicted the existence of electromagnetic waves capable of transporting energy across empty space …

Numéro du document : 37W-17249-6
Guide de présentation
RSA306, RSA306B, and RSA500A/600A
Spectrum Analyzer Application Programming Interface (API)

This document contains the API function calls to interface with the RSA306, RSA306B, RSA500A Series, and RSA600A Series Spectrum Analyzers through Microsoft Windows.
Numéro de référence : 077103104
Programmation
RSA306B Series
Real-Time Spectrum AnalyzerDeclassification and Security

This document provides instructions for declassifying and securing A RSA500A Series and RSA600A Series Real-Time Spectrum Analyzer.


Numéro de référence : 077124201
Déclassification
SignalVu-PC
Vector Signal Analysis Software

This document provides detailed information about the programming commands that can be used to remotely control the SignalVu-PC Vector Signal Analysis Software and connected instruments.


Numéro de référence : 077072114
Programmation
RSA306B and RSA306B-SMA
Spectrum Analyzers Installation and Safety

These instructions describe installation and basic operation of the Tektronix RSA306B and RSA306B-SMA USB Spectrum Analyzers. It also includes safety, compliance, and environmental information for the instrument.


Numéro de référence : 071348301
Utilisateur
RSA306B Real-Time USB Spectrum Analyzer
Specifications and Performance Verification

This document lists product specifications and performance verification procedures for the RSA306B USB Spectrum Analyzer.


Numéro de référence : 077124301
Vérification des performances
RSA300, RSA500, RSA600 Series
Spectrum Analyzers Self-Guided Demo Training Manual

With this guide, you will explore what you can do with the RSA306, RSA306B, RSA503A, RSA507A, RSA603A,and RSA607A USB Real-Time Spectrum Analyzers. Applications range from simple frequency / amplitude measurements of RF signals to real-time and modulation analysis that provide you with a complete system view of your device under test.
Numéro de référence : 071333002
Formation/Tutoriels
RSA306BRACK
RSA306B Rackmount Kit Installation Manual

This manual provides instructions to mount the RSA306B and RSA306 USB Spectrum Analyzers into a standard equipment rack.
Numéro de référence : 075109400
Utilisateur
RTSA V3 Demo Board
Quick Reference Card Reference

This Quick Start Card provides basic information about the RTSA V3 demonstration board such as connections, available signals, and controls.
Numéro de référence : 071332901
Utilisateur
RSA306B Series
Real-Time Spectrum Analyzer Declassification and Security Instructions

This document provides instructions for declassifying and securing A RSA500A Series and RSA600A Series Real-Time Spectrum Analyzer.
Numéro de référence : 077124200
Déclassification
RSA306 USB Spectrum Analyzer
Specifications and Performance Verification (Version 0 RF Signal Path Gain Cal) Technical Reference

This document lists product specifications and performance verification procedures for the RSA306 USB Spectrum Analyzer. This document applies only to instruments calibrated with Version 0 RF Signal Path Gain Cal.
Numéro de référence : 077103001
Vérification des performances
RSA306 USB Spectrum Analyzer
Specifications and Performance Verification (Version 1 RF Signal Path Gain Cal) Technical Reference

This document lists product specifications and performance verification procedures for the RSA306 USB Spectrum Analyzer. This document applies only to instruments calibrated with Version 1 (or above) RF Signal Path Gain Cal.
Numéro de référence : 077113300
Vérification des performances
RSA306
Spectrum Analyzer Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the RSA306.
Numéro de référence : 077103301
Déclassification
RSA306RACK
RSA306 Rackmount Kit Installation Manual

This manual provides instructions to mount the RSA306 USB Spectrum Analyzer into a standard equipment rack.
Numéro de référence : 071332702
Utilisateur
RSA306
Spectrum Analyzer Installation and Safety Installation Manual

These instructions describe installation and basic operation of the Tektronix RSA306 USB Spectrum Analyzer. It also includes safety, compliance, and environmental information for the instrument.
Numéro de référence : 071332301
Utilisateur principal
RTSA V3 Demo Board
Quick Reference Card Reference

This Quick Start Card provides basic information about the RTSA V3 demonstration board such as connections, available signals, and controls.
Numéro de référence : 071332900
Utilisateur
RTSA V3
Demo Board User User Manual

This document describes the operation and features of the RTSA Version 3 demonstration board. This demo board provides various types of signals to help demonstrate spectrum analyzer measurement features.
Numéro de référence : 077103800
Utilisateur
Tektronix RSA306
USB Spectrum Analyzer Self-Guided Demo Training Manual

With this guide, you will explore what you can do with the RSA306 USB spectrum analyzer. Applications range from simple frequency / amplitude measurements of RF signals to real-time and modulation analysis that provide you with a complete system view of your device under test.
Numéro de référence : 071333000
Formation/Tutoriels
RSA300TRANSIT
RSA300 Transportation Case Instructions

This document illustrates how you can configure the foam inserts inside the RSA300TRANSIT case (RSA300 Transportation Case).
Numéro de référence : 071332600
Utilisateur
RSA Application Programming Interface – API for 64-Bit Linux – V1.0.0014
The RSA API is a Linux C/C++ Shared Objects that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC …

Numéro de référence : 066207701
Application
RSA Application Programming Interface – API for 64-Bit Linux – CANDIDATE V0.13.220.16
The RSA API is a Linux C/C++ Shared Objects that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC …

Numéro de référence : 066207700
Application
RSA Application Programming Interface - API for 32-Bit Windows - V3.23.0022
This release adds support for the RSA513A and 518A models. The RSA API is a Windows C/C++ DLL that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support …

Numéro de référence : 066176207
Application
RSA Application Programming Interface - API for 64-Bit Windows - V3.23.0022
This release adds support for the RSA513A and 518A models. The RSA API is a Windows C/C++ DLL that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support …

Numéro de référence : 066169110
Application
SignalVu-PC Vector Signal Analysis Software - V3.23.0022
SignalVu-PC VSA software brings the analysis engine of the Tektronix Real-Time Signal Analyzer (RTSA) to your computer, enabling you to analyze live signals from RSA306, RSA500, RSA600, RSA7100A Spectrum Analyzers and MDO4000B/C Series oscilloscopes …

Numéro de référence : 066143422
Application
DataVu-PC Recorded Signal Analysis Software - V1.2.26
DataVu-PC analysis software for recordings makes short work of searching through large datasets for signals of interest. You can measure pulses and mark signals for export to other analysis programs, reducing time spent in post-capture analysis …

Numéro de référence : 066190103
SignalVu-PC Vector Signal Analysis Software - Release Candidate - V3.17.0013
SignalVu-PC VSA software brings the analysis engine of the Tektronix Real-Time Signal Analyzer (RTSA) to your computer, enabling you to analyze live signals from RSA306, RSA500, RSA600, RSA7100A Spectrum Analyzers and MDO4000B/C Series oscilloscopes …

Numéro de référence : 066143420
Application
SignalVu-PC Vector Signal Analysis Software - V3.16.0014
SignalVu-PC VSA software brings the analysis engine of the Tektronix Real-Time Signal Analyzer (RTSA) to your computer, enabling you to analyze live signals from RSA306, RSA500, RSA600, RSA7100A Spectrum Analyzers and MDO4000B/C Series oscilloscopes …

Numéro de référence : 066143419
Application
RSA Application Programming Interface - API for 32-bit Windows - V3.13.0087
The RSA API is a Windows C/C++ DLL that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included is …

Numéro de référence : 066176206
Application
RSA Application Programming Interface - API for 64-Bit Windows - V3.13.0087
The RSA API is a Windows C/C++ DLL that provides direct access to the RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included …

Numéro de référence : 066169109
Application
RSA Application Programming Interface - API for 64-Bit Windows - V3.11.0047
The RSA API is a Windows C/C++ DLL that provides direct access to the RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included …

Numéro de référence : 066169108
Application
RSA Application Programming Interface - API for 32-bit Windows - V3.11.0047
The RSA API is a Windows C/C++ DLL that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included is …

Numéro de référence : 066176205
Application
RSA Application Programming Interface - API for 64-Bit Windows - V3.9.0029
The RSA API is a Windows C/C++ DLL that provides direct access to the RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included …

Numéro de référence : 066169107
Application
RSA Application Programming Interface - API for 32-bit Windows - V3.9.0029
The RSA API is a Windows C/C++ DLL that provides direct access to RSA300/500/600 devices. It enables full control of the RSA and provides several forms of data and measurements to support custom applications independent of SignalVu-PC. Included is …

Numéro de référence : 066176204
Application
TekRSA300 IVI-COM Driver v1.0 for RSA306
The TekRSA300 series IVI-COM Driver is a custom specific IVI driver that requires RSA306 API software library to communicate to the RSA306 instrument. In addition to complying with a standard API for IVI Driver class, this driver provides RSA306 …

Numéro de référence : 066174200
Firmware
Interference Hunting Application Note
Spectrum managers and anyone charged with tracking down souces of interference are dealing with noise due to the "interference of things." This means that traditional interference hunting tools - primarily the swept tune spectrum analyzer - are no …

Numéro du document : 37W_60877_0
Note d’application
How mobile Network Operators use Tektronix Real-Time Spectrum Analyzer
Field service organizations for mobile communication of network operators are using Tektronix USB-based real-time spectrum analyzer for daily work, hundreds of technicians in different service regions are responsible to keep the health of the mobile …
Manuel d’instructions
Low Cost RF Sensors
With the explosion in growth of wireless enabled devices (ie. LoRA,NBIoT), many nontraditional organizations are looking for tools to monitor the health and security of their wireless networks. While there are many low-cost Software Defined Receivers …

Numéro du document : 37W-61404-0
Note d’application
Low-cost EMI Pre-compliance Testing Using a Spectrum Analyzer
Few engineers have unrestricted access to a calibrated EMI receiver and EMC test facility. Yet, performing cost-effective, basic EMI tests can save both time and money by identifying significant issues before you send your design to an EMI compliance …

Numéro du document : 37A-60141-2
Note d’application
Programmatic Control on Tektronix USB Real Time Spectrum Analyzers
Using the latest in commercial interfaces and available computing power, the Tektronix RSA 300/500/600 USB real time spectrum analyzers separate signal acquisition from measurement, dramatically lowering the cost of instrument hardware. The series is …

Numéro du document : 37W-61459-0
Note d’application
Wireless Connectivity Overview
Our “Wireless Connectivity Test” application note describes the most popular wireless connectivity standards for IoT (including LoRa and SigFox) and compares each standard from a cost, range, data rate and power requirements perspectives. Also …

Numéro du document : 37W_60960_0
Note d’application
TransSiP Breakthrough into Power Conversion Switching Noise
Tektronix RSA306 Spectrum Analyzer with DPX give TransSiP insightCase study for how TransSiP used the RSA 306 to capture and analyze short time varying transient events. 

Numéro du document : 37W-60881-0
Étude de cas
Automotive EMI/EMC Pre-compliance Tests
Electromagnetic interference (EMI) regulations are in place throughout the world to provide improved reliability and safety for users of electrical and electronic equipment. The automotive industry and individual automobile manufacturers are required …

Numéro du document : 37W-61461-0
Note d’application
Detecting Drones Using a Real-Time Spectrum Analyzer
Flying drones can be fun. For RC and photography enthusiasts, a drone is a source of entertainment, and with a camera attached, provides breathtaking birds-eye views. For commercial and first responder purposes, a drone can be a valuable asset for …

Numéro du document : 37W-61576-0
Note d’application
Tire Pressure Monitoring Systems and Remote/Passive Keyless Entry
Today, more sophisticated and sensitive RF electronic components and devices are being included in automobiles. These advances have resulted in much safer, efficient, and connected vehicles. They have also created new challenges for RF testing and …

Numéro du document : 37W-61460-0
Note d’application
EMI Pre-Compliance Testing and Troubleshooting with Tektronix EMCVu
Electromagnetic compatibility (EMC) and the related electromagnetic interference (EMI) seems to be one of those necessary evils that must be overcome prior to marketing commercial or consumer electronic products, as well as military and aerospace …

Numéro du document : 37W-61518-0
Note d’application
USB Spectrum Analyzers and SignalVu-PC FAQ
This document contains answers to questions about the RSA306/306B, RSA500A and RSA600A USB spectrum analyzers, and their associated SignalVu-PC software.  

Numéro du document : 37W-60373-0
Fiche d’informations
Real-Time Spectrum Analysis for EMI Diagnostics
This application note briefly examines the different stages of design and test with respect to test equipment and measurement techniques. It also reviews the currently-specified detection and filtering methods, and provides a quick reference to the …

Numéro du document : 37W-22084-2
Note d’application
Analyseur de spectre
Le RSA306B utilise votre PC et le logiciel d'analyse de signaux radio-fréquence (RF) Tektronix SignalVu-PC™ pour fournir des capacités d'analyse spectrale en temps réel, de capture en continu et analyse approfondie des signaux de 9 kHz à 6,2 GHz, le …

Numéro du document : 37F-60375-4
Datasheet