Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

MSO5000 / DPO5000

Les oscilloscopes MSO/DPO5000B, conçus pour les ingénieurs chargés du débogage et de la vérification de systèmes complexes, offrent une fidélité exceptionnelle au signal et des capacités mathématiques et d’analyse avancées, pour votre laboratoire ou votre table. Les modèles MSO sont équipés de 16 voies numériques et tous les modèles peuvent être équipés pour décoder les protocoles série standard pour donner une vue complète de vos systèmes. Vous pouvez aussi exécuter le logiciel d’analyse sous Windows® directement sur l’oscilloscope.

Prix de base
US $16,100 - US $32,200
Achat/Devis Des questions ? Rejoindre le chat
Bande passante

Jusqu’à 2 GHz

Nombre d‘échantillons

Jusqu'à 250 millions de points

Voies numériques

16
MSO standard
DPO en option

Voies analogiques

4

Mesure et analyse sophistiquées de signaux

Thumbnail

Les outils d’analyse standard comprennent 53 mesures automatisées, des statistiques de mesure, des histogrammes, le test des valeurs limites, les fonctions mathématiques sophistiquées sur le signal, des filtres personnalisables et la prise en charge des plugins mathématiques MATLAB et .NET personnalisés. Les autres applications en option, comme l’analyse avancée de la gigue et du diagramme de l’œil et l’analyse RF en large bande étendent les capacités alors que le déclenchement visuel permet de définir les déclenchements graphiques.

Points forts

  • Caractérisez les paramètres du signal à l’aide d’une large suite d’outils de mesure standard
  • L’analyse avancée de la gigue et de la synchronisation caractérise les problèmes d’intégrité du signal et leur source
  • Le logiciel SignalVu assure les mesures et l’analyse spectrale en large bande, avec des options pour l’audio, la modulation, les pulses RF et le temps pour receptacle
  • Le logiciel TekScope AnywhereTM permet d’effectuer des mesures et des analyses hors ligne.

Analyse et test de conformité en série dans les règles de l’art

Thumbnail

Simplifiez le débogage et la vérification des systèmes sophistiqués avec les options de décodage de protocole et de déclenchement en série pour les bus à basse et moyenne vitesse. Assurez l’interopérabilité des bus série à moyenne vitesse avec les tests de conformité automatisés.

Points forts

  • Décodage de protocole avec options de déclenchement et d’analyse en série disponibles pour I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, MIL-STD-1553B, CAN, LIN et FlexRay
  • Packs de tests de conformité automatisés disponibles pour USB 2.0, Ethernet, HSIC, MOST et BroadR-Reach

Mesures de puissance automatisées

Thumbnail

Les convertisseurs de puissance actuels sont efficaces et nécessitent moins de puissance en entrée pour une même puissance en sortie qu’auparavant, mais ils sont plus exigeants en termes de mesure de l’alimentation. Les mesures de puissance automatisées assurent des résultats simples et reproductibles pour vérifier et optimiser les performances du circuit de puissance.

Points forts

  • L’affaiblissement de commutation de transistor MOSFET et analyse de zone de fonctionnement sûr
  • Les mesures de facteur de puissance et des harmoniques pour la pré-conformité IEC61000-3-2
  • Les mesures d’affaiblissement de l’inducteur et du transformateur sur circuit
  • Test de conformité des adaptateurs d’alimentation USB pour chargeurs de batterie USB2.0 spécification v1.1 et IEC 62684

Les meilleures sondes du marché. Standard.

Thumbnail

Les sondes sont un élément clé du système de mesure du signal à ne pas négliger. Lorsque vous faites l’acquisition d’un oscilloscope MSO/DPO5000B, vous bénéficiez gratuitement des meilleures sondes passives disponibles sur le marché. Avec la meilleure charge capacitive du marché à 3,9 pF et une bande passante allant jusqu’à 1 GHz, les sondes TPP sont la solution parfaite au quotidien.

Points forts

  • Les sondes TPP sont fournies, une par voie analogique
  • Charge capacitive de sonde de 3,9 pF la meilleure du marché
  • Bande passante de la sonde 500 MHz ou 1 GHz

 

Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Voies numériques Tarif
DPO5034B 350 MHz 5 Géch./s 25 à 125 millions de points 4 - US $16,100
Configuration et devis
DPO5054B 500 MHz 5 Géch./s 25 à 125 millions de points 4 - US $19,900
Configuration et devis
MSO5034B 350 MHz 5 Géch./s 25 à 125 millions de points 4 16 US $20,300
Configuration et devis
MSO5054B 500 MHz 5 Géch./s 25 à 125 millions de points 4 16 US $24,200
Configuration et devis
DPO5104B 1 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 - US $24,500
Configuration et devis
DPO5204B 2 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 - US $27,900
Configuration et devis
MSO5104B 1 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 16 US $28,800
Configuration et devis
MSO5204B 2 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 16 US $32,200
Configuration et devis
Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Voies numériques Tarif
DPO5034B 350 MHz 5 Géch./s 25 à 125 millions de points 4 - US $16,100
Configuration et devis
DPO5054B 500 MHz 5 Géch./s 25 à 125 millions de points 4 - US $19,900
Configuration et devis
MSO5034B 350 MHz 5 Géch./s 25 à 125 millions de points 4 16 US $20,300
Configuration et devis
MSO5054B 500 MHz 5 Géch./s 25 à 125 millions de points 4 16 US $24,200
Configuration et devis
DPO5104B 1 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 - US $24,500
Configuration et devis
DPO5204B 2 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 - US $27,900
Configuration et devis
MSO5104B 1 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 16 US $28,800
Configuration et devis
MSO5204B 2 GHz 5 G éch./s à 10 G éch./s 25 à 125 millions de points 4 16 US $32,200
Configuration et devis
  Tektronix
MSO/DPO5000B
Keysight
Série S
LeCroy
HDO6000
R&S
Série RTO
Bande passante 350 MHz à 2 GHz 500 MHz à 8 GHz 350 MHz à 1 GHz 600 MHz à 4 GHz
Bande passante évolutive Non Oui Non Oui
Voies analogiques 4 4 4 2 ou 4
Fréquence d’échantillonnage analogique (toutes voies) Jusqu'à 5 G éch./s Jusqu'à 10 G éch./s Jusqu'à 2,5 G éch./s Jusqu'à 10 G éch./s
Longueur d’enregistrement standard (toutes voies) 25 M 50 M 50 M 50 M
Voies numériques (MSO) 16 (en option) 16 (en option) 16 (en option) 16 (en option)
Système d’exploitation Configuration ouverte Windows Configuration ouverte Windows Configuration ouverte Windows Configuration ouverte Windows
Sondes standard Jusqu’à 1 GHz en passif 500 MHz en passif 500 MHz en passif 500 MHz en passif
Garantie standard 1 an 3 ans 3 ans 3 ans

Mesures de puissance automatisées

Thumbnail

Les mesures automatisées et la création de rapports permettent d’obtenir des mesures simples et reproductibles de la qualité de l’alimentation, des pertes de commutation, des pertes magnétiques, des harmoniques et de bien d’autres éléments pour suivre l’évolution des convertisseurs de puissance actuels. En outre, les sondes de courant et les sondes différentielles TekVPI réduisent le niveau d’incertitude et éliminent les pièges des opérations de mesure.

Points forts

  • PWR en option : mesure et analyse sophistiquées de la puissance pour la caractérisation et le test des composants et les alimentations
  • USBPWR en option : test automatisé de conformité des adaptateurs d’alimentation USB pour chargeurs de batterie USB2.0 spécification v1.1 et IEC 62684

Analyse en série et test de conformité pour l’automobile

Thumbnail

Simplifiez le débogage et la vérification des systèmes automobiles avec les options de décodage de protocole et de déclenchement en série pour les bus CAN, LIN et FlexRay. Assurez l’interopérabilité des composants en série BroadR-Reach et MOST avec les tests de conformité automatisés.

Points forts

  • SR-AUTO en option : déclenchement et décodage de protocole CAN, LIN et FlexRay du contenu des paquets série
  • BRR en option : solution de conformité automatisée BroadR-Reach/100BASE-T1 et 1000BASE-T1
  • MOST en option : solution de test et de conformité électrique et de débogage pour MOST50 et MOST150

Décodage et analyse en série intégrés

Thumbnail

Le décodage de protocole, le déclenchement en série et l’analyse pour I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet et MIL-STD-1553B simplifient le débogage et la vérification de systèmes sophistiqués.

Points forts

  • Déclenchement et décodage de protocole SR-AERO MIL-STD-1553B du contenu des paquets série en option
  • Déclenchement et décodage de protocole SR-COMP RS-232/422/485/UART du contenu des paquets série en option
  • Décodage et recherche automatique sur le contenu des paquets série SR-DPHY MIPI® D-PHY en option
  • Déclenchement et décodage de protocole SR-EMBD I2C et SPI sur le contenu de paquets série en option
  • Recherche et décodage de protocole du contenu des paquets série SR-ENET 10BASE-T et 100BASE-TX en option
  • Déclenchement et décodage basse vitesse, pleine vitesse et haute vitesse du contenu des paquets série SR-USB USB 2.0 en option

Tests de conformité série

Thumbnail

Assurez l’interopérabilité des conceptions série USB 2.0 et Ethernet avec les tests de conformité automatisés.

Points forts

  • Caractérisation automatisée ET3, conformité et prise en charge complète de la couche physique pour 10BASE-T, 100BASE-TX et 1000BASE-T en option
  • Test de conformité USB2 en une pression avec instruments automatisés et contrôle de mode de test en option
  • En option, test de qualité du signal électrique HSIC et validation de protocole de l’hôte HSIC et des conceptions
  • Application logicielle complète d’analyse de l’interface mémoire DDRA pour DDR1/2/3/4, LPDDR1/2/3/4 et GDDR3/5 en option

Analyse avancée de la gigue et de la synchronisation

Thumbnail

Avec une analyse complète de la gigue et du diagramme de l’œil, ainsi que des algorithmes de décomposition, DPOJET quantifie les paramètres d’intégrité du signal et permet d’identifier les sources de bruit dans les conceptions actuelles de systèmes de communication, numérique et série haute vitesse.

Points forts

  • Caractérisez les performances des conceptions de bus haute vitesse en série et en parallèle
  • Caractérisez la gigue et le bruit de l’horloge et des données et l’intégrité du signal
  • Caractérisez la modulation des circuits avec horloge à étalement du spectre
  • Effectuez des tests physiques des normes série comme MIPI® D-PHY, DDR et MOST

Analyse RF à large bande

Thumbnail

Avec le logiciel d’analyse des signaux RF et vectoriels SignalVu, vous disposez des fonctionnalités d’un analyseur de signaux vectoriels et d’un analyseur de spectre, avec les fonctions de déclenchement d’un oscilloscope numérique, en un seul instrument. Utilisez SignalVu pour valider les conceptions à large bande et caractériser les événements spectraux à large bande.

Points forts

  • SVE en option : SignalVu Essentials assure l’analyse et la mesure spectrale large bande
  • SVA en option : mesures audio SignalVu AM/FM/Direct
  • SVM en option : analyse générale de modulation SignalVu
  • SVP en option : SignalVu analyse les signaux à pulse complexes
  • SVT en option : mesures de temps pour receptacle SignalVu - Fréquence et phase
Fiche technique Package logiciel / Option logicielle Description Configuration et devis
This is a side-by-side comparison of the Visual Trigger option on the Tektronix MSO/DPO5000 Series and Zone Triggering on the Agilent DSO-X 4000A Series oscilloscopes.  Find out how MSO/DPO5000 …
3m 30s
This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes.  The capabilities of each oscilloscope are evaluated as we walk through the …
5m 24s
This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Teledyne LeCroy HDO4000.
5m 27s
Discover how to use a Tektronix MSO5000B Series Oscilloscope to validate the operation of a High-Speed USB serial bus, using the SR-USB option.
6m 19s
This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes, focusing on the search and measurement functionality of each instrument for …
6m 15s
This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Agilent 9000H.
7m 13s
Measuring a small signal imposed on a much larger one requires enough vertical scale to capture the large signal, and enough resolution to see the small one.  This video shows some best practices …
8m 21s
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use the protocol trigger, decode and search capabilities …

Numéro du document : 48W-19040-21
Note d’application
How to Use a Mixed Signal Oscilloscope to Test Digital Circuits
Learn how to set up a mixed signal oscilloscope and how use it in several applications including: triggering on pulse width violations, combining analog and digital waveforms to capture crosstalk, troubleshooting setup/hold violations, and checking …

Numéro du document : 3GT-24008-4
Note d’application
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Introduction DC-DC converters are widely used electronic components that convert DC power from one voltage level to another while regulating the output voltage. The output provides a constant voltage to a circuit, regardless of …

Numéro du document : 1KW-60105-2
Note d’application
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
Numéro de la FAQ69186
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
Numéro de la FAQ60041
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
Numéro de la FAQ69176
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
Numéro de la FAQ64706
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
Numéro de la FAQ63516
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
Numéro de la FAQ64251
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
Numéro de la FAQ467516
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
Numéro de la FAQ64761
Do you have a detailed application note on how to use DPO/MSO5000/B Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO/DPO5000/B Series Lab Exercise Book for more details.
Numéro de la FAQ58166
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
Numéro de la FAQ64771
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
Numéro de la FAQ471576
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
Numéro de la FAQ62256
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
Numéro de la FAQ56456
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
Numéro de la FAQ55926
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
Numéro de la FAQ64516
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
Numéro de la FAQ64656
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
Numéro de la FAQ59716
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
Numéro de la FAQ60251
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
Numéro de la FAQ64826
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
Numéro de la FAQ782291
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
Numéro de la FAQ69386
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
Numéro de la FAQ69181
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
Numéro de la FAQ64561
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
Numéro de la FAQ66221
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
Numéro de la FAQ468146
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
Numéro de la FAQ467706
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
Numéro de la FAQ64691
I have an MSO5204 and noticed the MagniVu feature. Can you explain how MagniVu works?
The MagniVu acquisition is a parallel process to the main acquisition, and the record is acquired for every Main acquisition. MagniVu can be displayed at any time to achieve a higher resolution view of the data.MSO 5000 series oscilloscopes use …
Numéro de la FAQ58381
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
Numéro de la FAQ64776
When should I use MagniVu on my oscilloscope?
MagniVu allows you to have higher resolution to accurately determine edge placement on your digital data. It helps you to make precise timing measurements on digital edges. On the MSO/MDO4000/B/C and MSO5000/B Series, you can see up to 32 times more …
Numéro de la FAQ63886
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
Numéro de la FAQ55921
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
Numéro de la FAQ64666
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
Numéro de la FAQ56016
I am experiencing a SPC failure on DPO/MSO4000B series oscilloscope when I try to run SPC.   What is causing SPC to fail.
If the instrument is running firmware 7.2.0 or 7.3.0 and you have 4 traces on sceen that are postioned away from zero, running SPC could fail. If you press the front panel user "Default Setup", run SPC and it passes, upgrading the instrument to FW 7 …
Numéro de la FAQ69516
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
Numéro de la FAQ60306
How do I update the USB UTI drivers on my MSO/DPO5000/B?
There are two seperate parts to this, first is flashing the USB firmware, the second one is the windows driver.Part One: Before installing the TekUTI drivers, the scope needs to be prepared for the update. If TekScope is running, minimize it. The …
Numéro de la FAQ69271
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
Numéro de la FAQ780986
I have a DPO5000/B series scope . Is it possible to add digital channel capability without having to purchase a new instrument?
Yes. Simply order a DPO-UP with option MSOE.The MSOE upgrade option includes a P6616 16-channel digital probe with accessories and software option key to enable digital channel functionality.
Numéro de la FAQ58361
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
Numéro de la FAQ64781
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
Numéro de la FAQ470416
What are the maximum power draw ratings for the MSO/DPO5000/B Series oscilloscopes TEKVPI probes?
The max draw for the MSO/DPO5000/B Series TekVPI channels are 15W. With the External power adapter all channels can support any active VPI probe. This adapter is part 19-7465-xx. Please see the table link below for all the information regarding probe …
Numéro de la FAQ58656
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
Numéro de la FAQ247211
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
Numéro de la FAQ66181
Differences between the DPO/MSO5000B and the DPO/MSO5000 (nonB) series.
DPO/MSO5000B Product Changes: Solid State Drive now standard no HDD available Standard record length doubled to (25M/ch) on analog and digital channels Interleaves to 50 M on 1 or 2 channels on 2 GHz and 1 GHz models Some capabilities that are …
Numéro de la FAQ467561
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
Numéro de la FAQ782296
What is the maximum digital channel record length for an MSO5000 Series oscilloscope?
The maximum digital channel record length is 40 Mpoints. The actual digital channel record length depends upon many parameters:The memory option must support desired record length. Therefore, to get 40M digital record length, the instrument will need …
Numéro de la FAQ58821
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
Numéro de la FAQ59166
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
Numéro de la FAQ66226
Why isn’t the TPP1000 (Tektronix Passive Probe 1GHz) compatible with my scope?
Short answer is that if your scope doesn’t have the notched key that allows the probe to connect, then the TPP probe requires a different termination resistance than what your scope can provide. Long answer is that traditionally, passive probes …
Numéro de la FAQ467701
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64791
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
Numéro de la FAQ64766
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
Numéro de la FAQ58421
I want to use anti-virus software on my Windows-based oscilloscope. Will it slow down the processing or give me faulty measurement results?
Anti-virus software should not cause any errors in acquiring data or making measurements. The primary effect will be that operations done by the host process may take a little longer. Running anti-virus software on any PC has an effect on processing …
Numéro de la FAQ58441
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
Numéro de la FAQ58571
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
Numéro de la FAQ61606
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
Numéro de la FAQ60416
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
Numéro de la FAQ471231
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
Numéro de la FAQ62606
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
Numéro de la FAQ64726
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
Numéro de la FAQ64571
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
Numéro de la FAQ69346
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
Numéro de la FAQ60156
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
Numéro de la FAQ64756
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
Numéro de la FAQ59621
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
Numéro de la FAQ63686
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
Numéro de la FAQ63266
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
Numéro de la FAQ56226
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
Numéro de la FAQ69266
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
Numéro de la FAQ474266
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64796
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
Numéro de la FAQ64751
Mixed Signal Oscilloscopes
Designing with today’s faster data rates and tighter timing margins requires an oscilloscope with outstanding signal acquisition performance and analysis capabilities. Tektronix MSO/DPO5000B Series oscilloscopes provide exceptional signal fidelity …

Numéro du document : 48W-29560-10
Datasheet
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022411
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


Numéro de référence : 077001025
Programmation
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


Numéro de référence : 077022011
Programmation
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


Numéro de référence : 077001810
Utilisateur
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298006
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006315
Vérification des performances
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022305
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298005
Utilisateur principal
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006220
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001023
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001022
Programmation
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006314
Vérification des performances
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
Numéro de référence : 077069300
Utilisateur
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022304
Programmation
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
Numéro de référence : 077001809
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001021
Programmation
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022410
Utilisateur
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001020
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006217
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001019
Programmation
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
Numéro de référence : 075103804
Service
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006216
Aide en ligne
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022010
Programmation
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
Numéro de référence : 077007610
Service
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006214
Aide en ligne
RMD5000
Tektronix DPO & MSO 4000B Series and DPO & MSO5000/B Series Rackmount Kit Instructions

These instructions describe the installation of the rackmount kit to your standard bench-top instrument.
Numéro de référence : 075102002
Instructions d’installation sur site
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001018
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
Numéro de référence : 071298004
Utilisateur principal
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
Numéro de référence : 077024507
Déclassification
TekExpress BRR
Automated Compliance Solution Read This First

This document provides important release information about the BroadR-Reach (BRR) Automoated Compliance Solution software.
Numéro de référence : 077091100
Utilisateur
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022005
Programmation
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
Numéro de référence : 071285101
Instructions d’installation sur site
HCTEK54
Transit Case Instructions

This document provides information about the features and using the HCTEK54 transit case.
Numéro de référence : 071282800
Utilisateur
Probe and Accessories
Pouch Installation Instructions

Probe and Accessories Pouch Installation
Numéro de référence : 071282900
Instructions d’installation sur site
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
Numéro de référence : 077006305
Vérification des performances
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186017
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164515
Application
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066196756
Application
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093812
Pilote
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179007
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186016
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

Numéro de référence : 066186015
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

Numéro de référence : 066186008
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

Numéro de référence : 066141832
Firmware
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164512
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179006
Application
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

Numéro de référence : 066166806
Application
Deployment Package for DPO5000/B, MSO5000/B - V10.8.1
Deployment Package for DPO5000/B, MSO5000/B. It contains the TekScope Firmware and compatible application software.

This software is a self-extracting executable consisting of the main oscilloscope software version 10.8.1 and the optional …

Numéro de référence : 066141831
Firmware
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066180101
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164511
Application
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

Numéro de référence : 066151905
Application
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

Numéro de référence : 066170109
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

Numéro de référence : 066142807
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164510
Application
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

Numéro de référence : 066169913
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179005
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142805
Application
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

Numéro de référence : 066189001
Application
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

Numéro de référence : 066141820
Firmware
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093811
Pilote
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164509
Application
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170708
Firmware
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179002
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152505
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152504
Application
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170705
Firmware
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

Numéro de référence : 066141813
Firmware
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

Numéro de référence : 066186000
Application
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066126309
Application
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

Numéro de référence : 066169801
Application
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

Numéro de référence : 066140005
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164504
Application
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066172104
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and …

Numéro de référence : 066142803
Application
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

Numéro de référence : 066045315
Pilote
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164503
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164502
Application
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

Numéro de référence : 066177100
Application
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

Numéro de référence : 066177200
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142801
Application
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

Numéro de référence : 066133202
Utilitaires
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093809
Pilote
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

Numéro de référence : 066142101
Application
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

Numéro de référence : 066145300
Application
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

Numéro de référence : 066077407
Application
MSO5000 and DPO5000 Series Firmware Upgrade Package - Windows 7 V6.1.3
This is the latest firmware for the MSO/DPO5000 Series products.

Numéro de référence : 066126501
Firmware
SignalExpress Tektronix Edition Step for DPO5000 and MSO5000 Series Oscilloscopes V1.1.1
This SignalExpress Step provides the capability to connect, control, acquire and log the data from the MSO5000 and DPO5000 Series instruments from the Signal Express Environment. The step has the ability to capture, transfer and save waveforms …

Numéro de référence : 066118902
Application
Probing Techniques for Accurate Voltage Measurements on Power Supplies with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is  written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and …

Numéro du document : 51W-60161-3
Note d’application
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope …
Actualité
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

Numéro du document : 55W-28827-7
Dossier technique
Power Supply Measurement and Analysis with DPOPWR Application Software
      Discover how to make many common power measurements with Tektronix oscilloscopes and the DPOPWR power analysis software.  Included is useful information on probing, and characterizing power supplies and measuring switching loss, safe operating …

Numéro du document : 54W-23880-4
Note d’application
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from …

Numéro du document : 55T-18412-6
Guide de présentation
Wave Inspector® Navigation and Search: Simplifying Waveform Analysis
Modern digital oscilloscopes can capture massive amounts of data which must then be analyzed. Discover how the Tektronix Wave Inspector® navigation and search capability gives you the tools to extract the answers you need fast and efficiently.

Numéro du document : 48T-19039-9
Note d’application
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …

Numéro du document : 60W_14232_10
Guide de sélection de produit
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

Numéro du document : 55W-61401-2
Note d’application
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

Numéro du document : 48W-61617-0
Fiche d’informations
Visual Triggering
If dealing with complex signals, serial data or needing to capture signals from multiple channels then learn how Visual Trigger and Search (standard trigger feature) can quickly simply trigger setups and capture and locate events of interest.

Numéro du document : 48W-27803-3
Dossier technique
How to Minimize Probe Loading with Low Capacitance Probes
Probing a circuit always has some impact on signals. Probe loading changes the signal being probed and can cause measurement problems or can even cause a circuit to perform differently. Reducing capacitive loading can help minimize these effects. In …

Numéro du document : 51W-26294-6
Note d’application
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …

Numéro du document : 55W-61093-1
Note d’application
Tools to Boost Oscilloscope Measurement Resolution to More than 11 Bits
Oscilloscope measurement resolution depends on more than whether the analog-to-digital converter is an 8-bit, 10-bit, or 12-bit device.   The whole system, from end to end, must be optimized to mitigate the effects of noise, as well as improve …

Numéro du document : 48W-27802-4
Note d’application
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

Numéro du document : 46W-31080-7
Guide de sélection
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

Numéro du document : 55W-61095-0
Note d’application
Tips and Tricks for Optimizing Low Power Measurements
This technical brief gives best practices for making voltage and current measurements with an oscilloscope, especially in low-power applications.  It describes techniques and advantages of differential voltage measurements, the risks of probe loading …

Numéro du document : 48W-28259-1
Dossier technique
Testing a New Switch Mode Power Supply Design Poster
Get a quick overview of the key measurements for verifying a new switch mode power supply (SMPS) design.  This poster shows key measurements, from verifying your prototype during initial startup, to optimizing switching loss and magnetic losses, to …

Numéro du document : 46W-60156-0
Affiche
Using FastFrame™ Segmented Memory
This application note explains how to use FastFrame(TM) Segmented Memory feature to capture signal bursts or data packets without using memory to capture unimportant dead time.  This application note applies to the following series of …

Numéro du document : 55W-12112-2
Note d’application
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …

Numéro du document : 46W-60010-3
Note d’application
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes Describe electrical waveform types Understand basic …

Numéro du document : 03Z-8605-7
Guide de présentation
Introduction to Video Measurements
In this application note, we demonstrate using a MSO/DPO5000, MDO/MSO/DPO4000 and MDO/MSO/DPO3000 Series Oscilloscope to make a variety of video measurements that are common in standard and high definition systems.

Numéro du document : 3GW-20975-2
Note d’application
Tektronix Breaks Innovation Barrier AGAIN By Redefining Mid-Range Oscilloscopes
New 5 Series MSO Delivers 4, 6, or 8 Channels with FlexChannel Technology, Massive HD Capacitive Touch Display, Advanced UI, and Optional Windows OS Unprecedented Flexibility and Unmatched Visibility into Complex Embedded Systems _____ BEAVERTON …
Actualité
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

Numéro du document : 55W-29028-13
Guide de sélection
Physical Layer Compliance Testing for 100BASE-TX
This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

Numéro du document : 61W-17381-3
Note d’application
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

Numéro du document : 51W-60171-2
Note d’application
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance …

Numéro du document : 55W-61400-0
Note d’application
MSO/DPO5000 Series vs. LeCroy WavePro 7Zi Fact Sheet
Side-by-side comparison on important features like infinite persistence, waveform navigation and search, and digital debug using mixed signal oscilloscopes.

Numéro du document : 48W-26395-1
Compétitif
MSO/DPO5000B Advanced Power Measurement and Analysis Solutions Fact Sheet
This 2-page fact sheet gives an overview of the power supply measurement capabilities of MSO/DPO5000B oscilloscopes with DPOPWR Power Measurement and Analysis Software.  It lists current and voltage probes that are well-suited for power supply …

Numéro du document : 3GW-23687-4
Guide de sélection
MSO/DPO5000B Series vs. Agilent DSO 9000H Series
A side-by-side comparison of high vertical resolution, passive probing, key specifications, visual trigger and search, and more.

Numéro du document : 48W-30179-0
Compétitif
MSO/DPO5000 Series vs. Agilent MSO/DSO7000B Fact Sheet
Side-by-side comparison on important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with an MSO, and more.

Numéro du document : 48W-26199-1
Compétitif
MSO/DPO5000B Series vs. Teledyne LeCroy HDO4000 Series
A comparison of features and key specifications of Lecroy HDO4000 Series and the MSO/DPO5000B Series.

Numéro du document : 48W-29924-0
Compétitif
MSO/DPO5000 Series vs. Agilent MSO/DSO-X 4000A Series
A side-by-side comparison of important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with MSO, and more.

Numéro du document : 3GW-29112-1
Compétitif
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use the protocol trigger, decode and search capabilities …

Numéro du document : 48W-19040-21
Note d’application
How to Use a Mixed Signal Oscilloscope to Test Digital Circuits
Learn how to set up a mixed signal oscilloscope and how use it in several applications including: triggering on pulse width violations, combining analog and digital waveforms to capture crosstalk, troubleshooting setup/hold violations, and checking …

Numéro du document : 3GT-24008-4
Note d’application
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Introduction DC-DC converters are widely used electronic components that convert DC power from one voltage level to another while regulating the output voltage. The output provides a constant voltage to a circuit, regardless of …

Numéro du document : 1KW-60105-2
Note d’application
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
Numéro de la FAQ69186
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
Numéro de la FAQ60041
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
Numéro de la FAQ69176
How do I reduce noise on signals using an oscilloscope?
There are many methods to reduce many types of noise on a signal. Tektronix oscilloscopes can do this through bandwidth limiting the scope input, averaging your signal, changing the sampling method to hi-resolution mode, and more. This video …
Numéro de la FAQ64706
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
Numéro de la FAQ63516
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
Numéro de la FAQ64251
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
Numéro de la FAQ467516
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
Numéro de la FAQ64761
Do you have a detailed application note on how to use DPO/MSO5000/B Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the MSO/DPO5000/B Series Lab Exercise Book for more details.
Numéro de la FAQ58166
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
Numéro de la FAQ64771
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
Numéro de la FAQ471576
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
Numéro de la FAQ62256
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was …
Numéro de la FAQ56456
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
Numéro de la FAQ55926
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
Numéro de la FAQ64516
How do I utilize the math channel feature on a DPO/MSO/MDO3000 or DPO/MSO/MDO4000 Series oscilloscope?
There are three main functionalities on the Math button on this scope. They range from Dual Waveform Math, FFT (Fast Fourier Transform), and Advance Math. These three functionalities have a range of abilities and are explained in this short YouTube …
Numéro de la FAQ64656
Is there a mictor adapter for the P6616 (logic probe for MSO5000B, MSO4000B, and MDO4000C + MDO4MSO) or P6516 (logic probe for the MSO4000 Series) or the P6316 (logic probe for MSO2000, MSO3000, MDO3000 + MDO3MSO Series)?
A mictor adapter is available from our partner Nexus Technologies. Use the mictor adapter NEX-HD2HEADER http://www.nexustechnology.com/products/laAccessories/hd2header/  
Numéro de la FAQ59716
Why do I see 16 flat lines for the MSO digital logic inputs when the same signals are displayed properly on the analog channels and all channels are setup for valid trigger threshold levels?
A common mistake for some, we first recommend verifing that the front panel MSO digital probe is properly connected by squeezing the probe's side latch buttons to un-plug, remove the probe then re-insert the probe label side up into the front panel …
Numéro de la FAQ60251
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
Numéro de la FAQ64826
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
Numéro de la FAQ782291
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
Numéro de la FAQ69386
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
Numéro de la FAQ69181
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
Numéro de la FAQ64561
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
Numéro de la FAQ66221
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
Numéro de la FAQ468146
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
Numéro de la FAQ467706
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
Numéro de la FAQ64691
I have an MSO5204 and noticed the MagniVu feature. Can you explain how MagniVu works?
The MagniVu acquisition is a parallel process to the main acquisition, and the record is acquired for every Main acquisition. MagniVu can be displayed at any time to achieve a higher resolution view of the data.MSO 5000 series oscilloscopes use …
Numéro de la FAQ58381
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
Numéro de la FAQ64776
When should I use MagniVu on my oscilloscope?
MagniVu allows you to have higher resolution to accurately determine edge placement on your digital data. It helps you to make precise timing measurements on digital edges. On the MSO/MDO4000/B/C and MSO5000/B Series, you can see up to 32 times more …
Numéro de la FAQ63886
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
Numéro de la FAQ55921
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
Numéro de la FAQ64666
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes …
Numéro de la FAQ56016
I am experiencing a SPC failure on DPO/MSO4000B series oscilloscope when I try to run SPC.   What is causing SPC to fail.
If the instrument is running firmware 7.2.0 or 7.3.0 and you have 4 traces on sceen that are postioned away from zero, running SPC could fail. If you press the front panel user "Default Setup", run SPC and it passes, upgrading the instrument to FW 7 …
Numéro de la FAQ69516
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
Numéro de la FAQ60306
How do I update the USB UTI drivers on my MSO/DPO5000/B?
There are two seperate parts to this, first is flashing the USB firmware, the second one is the windows driver.Part One: Before installing the TekUTI drivers, the scope needs to be prepared for the update. If TekScope is running, minimize it. The …
Numéro de la FAQ69271
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
Numéro de la FAQ780986
I have a DPO5000/B series scope . Is it possible to add digital channel capability without having to purchase a new instrument?
Yes. Simply order a DPO-UP with option MSOE.The MSOE upgrade option includes a P6616 16-channel digital probe with accessories and software option key to enable digital channel functionality.
Numéro de la FAQ58361
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
Numéro de la FAQ64781
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
Numéro de la FAQ470416
What are the maximum power draw ratings for the MSO/DPO5000/B Series oscilloscopes TEKVPI probes?
The max draw for the MSO/DPO5000/B Series TekVPI channels are 15W. With the External power adapter all channels can support any active VPI probe. This adapter is part 19-7465-xx. Please see the table link below for all the information regarding probe …
Numéro de la FAQ58656
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
Numéro de la FAQ247211
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
Numéro de la FAQ66181
Differences between the DPO/MSO5000B and the DPO/MSO5000 (nonB) series.
DPO/MSO5000B Product Changes: Solid State Drive now standard no HDD available Standard record length doubled to (25M/ch) on analog and digital channels Interleaves to 50 M on 1 or 2 channels on 2 GHz and 1 GHz models Some capabilities that are …
Numéro de la FAQ467561
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
Numéro de la FAQ782296
What is the maximum digital channel record length for an MSO5000 Series oscilloscope?
The maximum digital channel record length is 40 Mpoints. The actual digital channel record length depends upon many parameters:The memory option must support desired record length. Therefore, to get 40M digital record length, the instrument will need …
Numéro de la FAQ58821
Can the P6316, P6516, or P6616 logic probes be used interchangeably?
The simple answer is no they can't be used interchangeably. The front end of the logic channels are different so different logic probes are needed between the scopes.   For MSO2000/B, MSO3000, and MDO3000 Series oscilloscopes, only the P6316 logic …
Numéro de la FAQ59166
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
Numéro de la FAQ66226
Why isn’t the TPP1000 (Tektronix Passive Probe 1GHz) compatible with my scope?
Short answer is that if your scope doesn’t have the notched key that allows the probe to connect, then the TPP probe requires a different termination resistance than what your scope can provide. Long answer is that traditionally, passive probes …
Numéro de la FAQ467701
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64791
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
Numéro de la FAQ64766
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
Numéro de la FAQ58421
I want to use anti-virus software on my Windows-based oscilloscope. Will it slow down the processing or give me faulty measurement results?
Anti-virus software should not cause any errors in acquiring data or making measurements. The primary effect will be that operations done by the host process may take a little longer. Running anti-virus software on any PC has an effect on processing …
Numéro de la FAQ58441
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
Numéro de la FAQ58571
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
Numéro de la FAQ61606
Can active probes with TekProbe interface (such as a P6205) be used on the DPO4000B or MSO4000B series scopes?
Yes. A TPA-BNC adaptor is required for people to connect legacy TekProbe interface probes to the new TekVPI interface. The adapter works on any TekVPI scopes inlcuding the MSO/DPO/MDO4000/B/C, MSO/DPO/MDO3000 MSO/DPO2000/B or MSO/DPO5000/B or …
Numéro de la FAQ60416
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
Numéro de la FAQ471231
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use …
Numéro de la FAQ62606
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
Numéro de la FAQ64726
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
Numéro de la FAQ64571
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
Numéro de la FAQ69346
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
Numéro de la FAQ60156
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
Numéro de la FAQ64756
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
Numéro de la FAQ59621
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
Numéro de la FAQ63686
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
Numéro de la FAQ63266
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes …
Numéro de la FAQ56226
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
Numéro de la FAQ69266
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
Numéro de la FAQ474266
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64796
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
Numéro de la FAQ64751
Mixed Signal Oscilloscopes
Designing with today’s faster data rates and tighter timing margins requires an oscilloscope with outstanding signal acquisition performance and analysis capabilities. Tektronix MSO/DPO5000B Series oscilloscopes provide exceptional signal fidelity …

Numéro du document : 48W-29560-10
Datasheet
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022411
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


Numéro de référence : 077001025
Programmation
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


Numéro de référence : 077022011
Programmation
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


Numéro de référence : 077001810
Utilisateur
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298006
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006315
Vérification des performances
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022305
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298005
Utilisateur principal
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006220
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001023
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001022
Programmation
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006314
Vérification des performances
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
Numéro de référence : 077069300
Utilisateur
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022304
Programmation
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
Numéro de référence : 077001809
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001021
Programmation
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022410
Utilisateur
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001020
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006217
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001019
Programmation
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
Numéro de référence : 075103804
Service
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006216
Aide en ligne
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022010
Programmation
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
Numéro de référence : 077007610
Service
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006214
Aide en ligne
RMD5000
Tektronix DPO & MSO 4000B Series and DPO & MSO5000/B Series Rackmount Kit Instructions

These instructions describe the installation of the rackmount kit to your standard bench-top instrument.
Numéro de référence : 075102002
Instructions d’installation sur site
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001018
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
Numéro de référence : 071298004
Utilisateur principal
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
Numéro de référence : 077024507
Déclassification
TekExpress BRR
Automated Compliance Solution Read This First

This document provides important release information about the BroadR-Reach (BRR) Automoated Compliance Solution software.
Numéro de référence : 077091100
Utilisateur
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022005
Programmation
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
Numéro de référence : 071285101
Instructions d’installation sur site
HCTEK54
Transit Case Instructions

This document provides information about the features and using the HCTEK54 transit case.
Numéro de référence : 071282800
Utilisateur
Probe and Accessories
Pouch Installation Instructions

Probe and Accessories Pouch Installation
Numéro de référence : 071282900
Instructions d’installation sur site
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
Numéro de référence : 077006305
Vérification des performances
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186017
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164515
Application
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066196756
Application
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093812
Pilote
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179007
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186016
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

Numéro de référence : 066186015
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

Numéro de référence : 066186008
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

Numéro de référence : 066141832
Firmware
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164512
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179006
Application
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

Numéro de référence : 066166806
Application
Deployment Package for DPO5000/B, MSO5000/B - V10.8.1
Deployment Package for DPO5000/B, MSO5000/B. It contains the TekScope Firmware and compatible application software.

This software is a self-extracting executable consisting of the main oscilloscope software version 10.8.1 and the optional …

Numéro de référence : 066141831
Firmware
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066180101
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164511
Application
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

Numéro de référence : 066151905
Application
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

Numéro de référence : 066170109
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

Numéro de référence : 066142807
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164510
Application
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

Numéro de référence : 066169913
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179005
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142805
Application
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

Numéro de référence : 066189001
Application
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

Numéro de référence : 066141820
Firmware
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093811
Pilote
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164509
Application
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170708
Firmware
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179002
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152505
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152504
Application
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170705
Firmware
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

Numéro de référence : 066141813
Firmware
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

Numéro de référence : 066186000
Application
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066126309
Application
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

Numéro de référence : 066169801
Application
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

Numéro de référence : 066140005
Application
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066172104
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164504
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and …

Numéro de référence : 066142803
Application
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

Numéro de référence : 066045315
Pilote
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164503
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164502
Application
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

Numéro de référence : 066177200
Application
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

Numéro de référence : 066177100
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142801
Application
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

Numéro de référence : 066133202
Utilitaires
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093809
Pilote
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

Numéro de référence : 066142101
Application
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

Numéro de référence : 066145300
Application
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

Numéro de référence : 066077407
Application
MSO5000 and DPO5000 Series Firmware Upgrade Package - Windows 7 V6.1.3
This is the latest firmware for the MSO/DPO5000 Series products.

Numéro de référence : 066126501
Firmware
SignalExpress Tektronix Edition Step for DPO5000 and MSO5000 Series Oscilloscopes V1.1.1
This SignalExpress Step provides the capability to connect, control, acquire and log the data from the MSO5000 and DPO5000 Series instruments from the Signal Express Environment. The step has the ability to capture, transfer and save waveforms …

Numéro de référence : 066118902
Application
Probing Techniques for Accurate Voltage Measurements on Power Supplies with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is  written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and …

Numéro du document : 51W-60161-3
Note d’application
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope …
Actualité
TekVPI Probe Power Requirements on Digital Phosphor Oscilloscopes
This technical brief gives configuration information for using TekVPI probes with oscilloscopes that include the TekVPI probe interface. It gives the maximum internal probe power available from each oscilloscope series, and lists the power …

Numéro du document : 55W-28827-7
Dossier technique
Power Supply Measurement and Analysis with DPOPWR Application Software
      Discover how to make many common power measurements with Tektronix oscilloscopes and the DPOPWR power analysis software.  Included is useful information on probing, and characterizing power supplies and measuring switching loss, safe operating …

Numéro du document : 54W-23880-4
Note d’application
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from …

Numéro du document : 55T-18412-6
Guide de présentation
Wave Inspector® Navigation and Search: Simplifying Waveform Analysis
Modern digital oscilloscopes can capture massive amounts of data which must then be analyzed. Discover how the Tektronix Wave Inspector® navigation and search capability gives you the tools to extract the answers you need fast and efficiently.

Numéro du document : 48T-19039-9
Note d’application
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …

Numéro du document : 60W_14232_10
Guide de sélection de produit
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

Numéro du document : 55W-61401-2
Note d’application
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

Numéro du document : 48W-61617-0
Fiche d’informations
Visual Triggering
If dealing with complex signals, serial data or needing to capture signals from multiple channels then learn how Visual Trigger and Search (standard trigger feature) can quickly simply trigger setups and capture and locate events of interest.

Numéro du document : 48W-27803-3
Dossier technique
How to Minimize Probe Loading with Low Capacitance Probes
Probing a circuit always has some impact on signals. Probe loading changes the signal being probed and can cause measurement problems or can even cause a circuit to perform differently. Reducing capacitive loading can help minimize these effects. In …

Numéro du document : 51W-26294-6
Note d’application
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …

Numéro du document : 55W-61093-1
Note d’application
Tools to Boost Oscilloscope Measurement Resolution to More than 11 Bits
Oscilloscope measurement resolution depends on more than whether the analog-to-digital converter is an 8-bit, 10-bit, or 12-bit device.   The whole system, from end to end, must be optimized to mitigate the effects of noise, as well as improve …

Numéro du document : 48W-27802-4
Note d’application
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

Numéro du document : 46W-31080-7
Guide de sélection
Identifying Setup and Hold Violations with a Mixed Signal Oscilloscope
Problems with setup and hold timing are among the most challenging to identify.  Mixed signal oscilloscopes (MSOs) are able to capture both analog and digital representations of signals, making them well-suited for identifying digital timing problems …

Numéro du document : 55W-61095-0
Note d’application
Tips and Tricks for Optimizing Low Power Measurements
This technical brief gives best practices for making voltage and current measurements with an oscilloscope, especially in low-power applications.  It describes techniques and advantages of differential voltage measurements, the risks of probe loading …

Numéro du document : 48W-28259-1
Dossier technique
Testing a New Switch Mode Power Supply Design Poster
Get a quick overview of the key measurements for verifying a new switch mode power supply (SMPS) design.  This poster shows key measurements, from verifying your prototype during initial startup, to optimizing switching loss and magnetic losses, to …

Numéro du document : 46W-60156-0
Affiche
Using FastFrame™ Segmented Memory
This application note explains how to use FastFrame(TM) Segmented Memory feature to capture signal bursts or data packets without using memory to capture unimportant dead time.  This application note applies to the following series of …

Numéro du document : 55W-12112-2
Note d’application
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …

Numéro du document : 46W-60010-3
Note d’application
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes Describe electrical waveform types Understand basic …

Numéro du document : 03Z-8605-7
Guide de présentation
Introduction to Video Measurements
In this application note, we demonstrate using a MSO/DPO5000, MDO/MSO/DPO4000 and MDO/MSO/DPO3000 Series Oscilloscope to make a variety of video measurements that are common in standard and high definition systems.

Numéro du document : 3GW-20975-2
Note d’application
Tektronix Breaks Innovation Barrier AGAIN By Redefining Mid-Range Oscilloscopes
New 5 Series MSO Delivers 4, 6, or 8 Channels with FlexChannel Technology, Massive HD Capacitive Touch Display, Advanced UI, and Optional Windows OS Unprecedented Flexibility and Unmatched Visibility into Complex Embedded Systems _____ BEAVERTON …
Actualité
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

Numéro du document : 55W-29028-13
Guide de sélection
Physical Layer Compliance Testing for 100BASE-TX
This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

Numéro du document : 61W-17381-3
Note d’application
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

Numéro du document : 51W-60171-2
Note d’application
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance …

Numéro du document : 55W-61400-0
Note d’application
MSO/DPO5000 Series vs. LeCroy WavePro 7Zi Fact Sheet
Side-by-side comparison on important features like infinite persistence, waveform navigation and search, and digital debug using mixed signal oscilloscopes.

Numéro du document : 48W-26395-1
Compétitif
MSO/DPO5000B Advanced Power Measurement and Analysis Solutions Fact Sheet
This 2-page fact sheet gives an overview of the power supply measurement capabilities of MSO/DPO5000B oscilloscopes with DPOPWR Power Measurement and Analysis Software.  It lists current and voltage probes that are well-suited for power supply …

Numéro du document : 3GW-23687-4
Guide de sélection
MSO/DPO5000B Series vs. Agilent DSO 9000H Series
A side-by-side comparison of high vertical resolution, passive probing, key specifications, visual trigger and search, and more.

Numéro du document : 48W-30179-0
Compétitif
MSO/DPO5000 Series vs. Agilent MSO/DSO7000B Fact Sheet
Side-by-side comparison on important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with an MSO, and more.

Numéro du document : 48W-26199-1
Compétitif
MSO/DPO5000B Series vs. Teledyne LeCroy HDO4000 Series
A comparison of features and key specifications of Lecroy HDO4000 Series and the MSO/DPO5000B Series.

Numéro du document : 48W-29924-0
Compétitif
MSO/DPO5000 Series vs. Agilent MSO/DSO-X 4000A Series
A side-by-side comparison of important features like serial triggering and decode, waveform navigation and search, waveform capture rate, digital debug with MSO, and more.

Numéro du document : 3GW-29112-1
Compétitif