Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

MSO/DPO70000

Découvrez vos signaux réels et capturez plus de détails avec la meilleure capacité de capture de signal du marché. Automatisez la configuration, l’acquisition et l’analyse des signaux de données série haute vitesse avec un jeu d’outils conçu pour accélérer le débogage et les tests de conformité de votre conception.

Bande passante

4 GHz -
33 GHz

Longueur d'enregistrement

Jusqu'à 1 G points

Voies

4 analogiques
16 numériques (MSO)

Fréquence d’échantillonnage

Jusqu'à 100 G éch./s

Découvrez le signal réel

Thumbnail

Le meilleur niveau de fiabilité du signal du marché, le niveau de bruit le plus faible et le nombre effectif de bits le plus élevé (ENOB), tout ceci vous assure une parfaite fidélité du signal et des mesures précises. Le rapport signal/bruit important et le niveau de bruit interne faible offrent une caractérisation précise de vos conceptions.

Points forts

  • L’amélioration de la bande passante élimine les imperfections dans la réponse de fréquence à la pointe de la sonde
  • Un niveau de bruit de gigue faible et une précision verticale élevée offrent plus de marge dans vos mesures
  • Une large gamme de sondes simplifie la configuration des mesures complexes et préserve l’intégrité du signal
  • Comparez la synchronisation du signal optique et du signal électrique sur un seul écran avec la sonde optique étalonnée.

Réduisez le temps de débogage

Thumbnail

Du premier démarrage aux vérifications du fonctionnement, les oscilloscopes MSO/DPO70000 disposent des fonctionnalités dont vous avez besoin pour trouver rapidement les problèmes. Le meilleur taux de capture des signaux du marché et le déclenchement Pinpoint® assurent l’efficacité de la recherche et de la capture des problèmes intermittents.

Points forts

  • FastAcq suit les évolutions de vos signaux et vous présente le comportement réel, y compris avec les défauts les plus insaisissables
  • Recherchez rapidement les états ou les séquences de bus non valides avec le décodage et le déclenchement en parallèle ou en série
  • iCapture™ vérifie facilement les caractéristiques analogiques des signaux numériques, sans changer les connexions
  • Le déclenchement visuel vous fait gagner des heures de capture et de recherche manuelle dans les acquisitions afin de trouver les événements critiques et de faire aboutir vos efforts de débogage

Des outils de mesure et d’analyse pour rester sur la bonne voie 

Thumbnail

Les logiciels qui prennent en charge l’application contiennent les tests de conformité automatisés, les outils de débogage instructifs et de nombreuses options de connexion au signal dont vous avez besoin pour vérifier et certifier vos conceptions. 

Points forts

  • DPOJET : l’outil de mesure le plus complet et le plus flexible disponible actuellement
  • Analyse de la liaison de données série : l’outil le plus puissant et le plus complet pour l’analyse et la compensation des effets du signal dans les liaisons de données série
  • La plus large gamme de normes prises en charge, de I2C, SPI, RS-232, FlexRay, MIPI, DisplayPort, HDMI, PCIe Gen3/Gen4, SATA/SAS, USB3.1, Type-C, 10/100BaseT jusqu’à 10G/100G Ethernet
  • Des outils de débogage puissants pour détecter et corriger rapidement les problèmes de conception
  • Mesures optiques, comme le taux d’extinction (ER), la puissance optique moyenne (AOP), l’amplitude de modulation optique (OMA), la valeur optique haute/valeur optique basse, compatible avec la sonde optique DPO7OE1/DPO7OE2

Vous avez besoin d’un instrument de prêt similaire au vôtre pendant les réparations ?

Restez productif pendant la réparation de vos instruments. L’option de service Gold Care comprend le prêt gratuit d’un appareil pour ne pas interrompre le travail de votre équipe. Les unités prêtées sont envoyées dans les 48 heures consécutives à la demande de réparation et les appareils des clients Gold Care sont pris en charge en priorité lorsqu’ils sont réceptionnés au centre de réparation.

En savoir plus

Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Voies numériques Tarif
MSO72504DX 25 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
MSO73304DX 33 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
DPO72304DX 23 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
DPO70404C 4 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
DPO73304DX 33 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
MSO70804C 8 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
MSO72304DX 23 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
DPO70804C 8 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
MSO71254C 12,5 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis
DPO70604C 6 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
MSO70604C 6 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
DPO71254C 12,5 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
DPO72004C 20 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
DPO72504DX 25 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
MSO71604C 16 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis
DPO71604C 16 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
MSO72004C 20 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis
MSO70404C 4 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Voies numériques Tarif
MSO72504DX 25 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
MSO73304DX 33 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
DPO72304DX 23 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
DPO70404C 4 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
DPO73304DX 33 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
MSO70404C 4 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
MSO70804C 8 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
MSO72304DX 23 GHz 50 G éch./s à 100 G éch./s 62,5 millions à 1 G points 4 16 Configuration et devis
DPO70804C 8 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
MSO71254C 12,5 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis
DPO70604C 6 GHz 25 G éch./s 31,25 à 125 millions de points 4 - Configuration et devis
MSO70604C 6 GHz 25 G éch./s 62,5 à 125 millions de points 4 16 Configuration et devis
DPO71254C 12,5 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
DPO72004C 20 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
DPO72504DX 25 GHz 50 G éch./s à 100 G éch./s 31,25 millions à 1 G points 4 - Configuration et devis
MSO71604C 16 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis
DPO71604C 16 GHz 50 G éch./s à 100 G éch./s 31,25 à 250 millions de points 4 - Configuration et devis
MSO72004C 20 GHz 50 G éch./s à 100 G éch./s 62,5 à 250 millions de points 4 16 Configuration et devis

Conception analogique ou numérique et débogage

Thumbnail

Lorsque vous procédez au débogage de votre prochaine conception, vous devez retrouver et analyser rapidement une large palette de problèmes de signaux mixtes, des problèmes d’intégrité du signal, comme la diaphonie ou la gigue, aux violations de configuration et de paquets retenus ou abandonnés. C’est précisément dans cette situation que vous avez besoin d’un oscilloscope disposant d’outils puissants et présentant des performances fiables. Avec le modèle MSO/DPO70000 sur votre table, vous respectez le calendrier que vous vous êtes fixé.

Points forts

  • Affichez facilement les caractéristiques analogiques de n’importe quelle entrée et vérifiez la synchronisation du système avec iCapture™ sur 4 voies analogiques et 16 voies logiques
  • Analysez les opérations du système à l’échelle qui vous convient avec une mémoire à long terme sur toutes les voies
  • Recherchez et corrigez les problèmes avec une gamme complète d’outils de déclenchement, de décodage et de mesure

Communications de données

Thumbnail

Les réseaux de communication de données actuels sont en constante évolution et sont basés sur de nombreuses normes, toutes différentes. L’oscilloscope MSO/DPO70000 comprend des outils complets permettant de valider la couche physique des composants Ethernet et de déboguer les systèmes basés sur Ethernet de 10BASE-T à 40/100 Gb. L’oscilloscope MSO/DPO70000 comporte également les outils de conformité et de débogage pour les autres normes de communication de données.

Points forts

  • Outils de test de conformité et de débogage automatisés adaptés aux différentes normes
  • Jeu complet d’outils d’analyse de gigue et de débogage
  • Caractériser les signaux PAM4 et NRZ

Communications série haute vitesse

Thumbnail

Les normes des interfaces numériques nouvelle génération repoussent les limites des outils actuels de conformité et de débogage. Les mesures automatisées de la gamme MSO/DPO70000 accélèrent les cycles de validation de la couche physique et assurent la cohérence. Des outils puissants comme le décodage de protocole et le déclenchement visuel raccourcissent le débogage lorsque les mesures de conformité échouent. Identifiez la gigue et le bruit de diaphonie ou autre bruit de couplage. 

Points forts

  • Accélérez l’analyse, la validation et les tests préliminaires de conformité de votre conception PCIe, SATA ou SAS
  • Identifiez rapidement la cause principale des problèmes lors du test de conceptions SuperSpeed USB 3.1 Type-C
  • Réduisez les temps de test de conformité DisplayPort et de validation de la couche physique HDMI
  • L’analyse de liaison de données série avec DPOJET propose la simulation complète et la mesure des bus pour ordinateur, communication et mémoire

RADAR et RF

Thumbnail

La série MSO/DPO70000 avec logiciel d’analyse de signaux vectoriels SignalVu met à votre disposition les capacités d’analyse nécessaires pour résoudre en toute confiance les problèmes de conception RF, sans-fil et hyperfréquences les plus complexes. Vous pouvez analyser les signaux jusqu’à 33 GHz avec les mêmes outils utilisés sur les analyseurs de spectre en temps réel Tektronix.

Points forts

  • Vérifiez facilement les conceptions de radar large bande, les liaisons satellites à haut débit, les réseaux WLAN 802.11 ou de saut de fréquence radio
  • Prenez simultanément des mesures de fréquence, de synchronisation, de phase et de modulation

 

Fiche technique Package logiciel / Option logicielle Description Configuration et devis
Accessoire TCA-1MEG
Fiche technique Description
AMPLIFICATEUR ; TAMPON HAUTE IMPÉDANCE ; 1 MOHM/10PF ;TEKPROBE BNC-TEKCONNECT ; AVEC P6139B, CERTIFICAT DE TRAÇABILITÉ DE L’ÉTALONNAGE
Accessoire TCA292D
Fiche technique Description
Affichage Fiche technique ADAPTATEUR TEKCONNECT 2,92 MM
Accessoire TCA-292MM
Fiche technique Description
TEKCONNECT 2,92 MM ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE 2,92 MM
Accessoire TCA75
Fiche technique Description
ADAPTATEUR TEKCONNECT ; 75 OHMS À 50 OHMS, AVEC CONNECTEUR D’ENTRÉE BNC 75 OHMS
Accessoire TCA-BNC
Fiche technique Description
TEKCONNECT BNC ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE BNC
Accessoire TCA-N
Fiche technique Description
TEKCONNECT N ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE TYPE N
Accessoire TCA-SMA
Fiche technique Description
TEKCONNECT SMA ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE SMA
Accessoire TCA-VPI50
Fiche technique Description
Adaptateur TekVPI - TekConnect pour accessoires bouclés 50 ohms
Accessoire TPA-BNC
Fiche technique Description
Adaptateur de sonde TekProbe-BNC vers TekVPI
Fiche technique Accessoire Description
Affichage Fiche technique TCA-1MEG AMPLIFICATEUR ; TAMPON HAUTE IMPÉDANCE ; 1 MOHM/10PF ;TEKPROBE BNC-TEKCONNECT ; AVEC P6139B, CERTIFICAT DE TRAÇABILITÉ DE L’ÉTALONNAGE
TCA292D ADAPTATEUR TEKCONNECT 2,92 MM
Affichage Fiche technique TCA-292MM TEKCONNECT 2,92 MM ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE 2,92 MM
Affichage Fiche technique TCA75 ADAPTATEUR TEKCONNECT ; 75 OHMS À 50 OHMS, AVEC CONNECTEUR D’ENTRÉE BNC 75 OHMS
Affichage Fiche technique TCA-BNC TEKCONNECT BNC ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE BNC
Affichage Fiche technique TCA-N TEKCONNECT N ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE TYPE N
Affichage Fiche technique TCA-SMA TEKCONNECT SMA ; ADAPTATEUR TEKCONNECT AVEC CONNECTEUR D’ENTRÉE SMA
Affichage Fiche technique TCA-VPI50 Adaptateur TekVPI - TekConnect pour accessoires bouclés 50 ohms
Affichage Fiche technique TPA-BNC Adaptateur de sonde TekProbe-BNC vers TekVPI
As design margins shrink, accurate and standard-specific measurement is key to debugging, verifying design and performing interoperability testing when designing PCIe devices. Having confidence in …
53m 34s
Learn how to open closed eyes using equalization techniques and how to de-embed reflections and loss caused by the measurement setup using SDLA Visualizer for Tektronix Real-Time Oscilloscopes.
30m 56s
Learn how to dramatically cut down test time on required compliance interop tests for USB3 using an automated test suite from Tektronix. 
4m 5s
This Tektronix webinar will teach engineers how to use modeling tools to correlate simulations with high-speed physical layer measurements on Serial Bus Standards using the DPO/MSO70000 Series …
27m 39s
This webinar will explain how to prepare for next generation DDR-based memory testing. Learn about the changes these new standards bring to electrical verification and how to prepare for proper …
15m 38s
The NEW P7700 Series TriMode Probe provides the highest probe fidelity available for real-time oscilloscopes. Watch our 60-second video to see how this new probe can help minimize noise and easily …
55s
The MSO/DPO70000 Series oscilloscope delivers exceptional signal acquisition performance and analysis capability. Discover your real signals and capture more signal details with the industry's …
5m 50s
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077409
Aide en ligne
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.5.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155515
Application
Electrical Verification of DDR Memory
With the ever increasing DDR SDRAM Clock Frequencies and Signal Edge Rates, signal integrity and bus state verification techniques are increasingly important for DDR Memory design success. This application note focuses on techniques for triggering …

Numéro du document : 55W-23432-3
Note d’application
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces …

Numéro du document : 37W-23378-4
Note d’application
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use the protocol trigger, decode and search capabilities …

Numéro du document : 48W-19040-21
Note d’application
High Speed Interface Standards
This e-Guide will help you learn more about design challenges for testing PCIe 4.0, SAS, SuperSpeed USB, and DDR4 standards. Within the pages of the eGuide you will also get quick access to technical resources that will help you understand design …

Numéro du document : 55W-60038-1
Manuel d’instructions
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets – computers, cell phones, entertainment systems …

Numéro du document : 55C-16736-3
Guide de présentation
Optical Bandwidth Requirements for NRZ and PAM4 Signaling
Until recently, both optical and electrical bandwidths produced similar results but this is no longer the case with the recent IEEE spec change. This paper clarifies these terms, mathematically shows how they are related, and provides the basis to …

Numéro du document : 55W-61363-0
Livre blanc
Measurement System Signal Integrity: Important Factors to Consider
Sufficient bandwidth is a key oscilloscope requirement for making accurate measurements. However, there are a number of other factors and specifications that can help you properly perform signal integrity characterization.

Numéro du document : 55W-18024-3
Dossier technique
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
Numéro de la FAQ66181
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
Numéro de la FAQ64781
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
Numéro de la FAQ470416
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
Numéro de la FAQ66226
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
Numéro de la FAQ64766
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
Numéro de la FAQ64666
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
Numéro de la FAQ58571
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
Numéro de la FAQ69386
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
Numéro de la FAQ61606
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
Numéro de la FAQ64251
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
Numéro de la FAQ467516
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
Numéro de la FAQ64571
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
Numéro de la FAQ64756
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
Numéro de la FAQ782296
Question:  When I start the TekExpress application on my oscilloscope, I get a "Scope status returned as: PASS:UNCAL - The instrument is not fit for duty and the results might be invalid." error message.  I just had my scope calibrated so does this mean that it is now un-calibrated?
The error message you are experiencing is an bug in firmware version (V6.4.5).  This version had bug where it reports UNCAL.  This is fixed the later versions of the firmware.  I would recommend upgrading to a later version.  At the time of this FAQ …
Numéro de la FAQ64836
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64791
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
Numéro de la FAQ64751
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
Numéro de la FAQ247211
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
Numéro de la FAQ474266
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
Numéro de la FAQ780986
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64796
How do I use TekExpress to perform a USB 3.0 Device Transmitter Test?
USB 3 Tx Testing ScriptHello and welcome to Tektronix! Today I’m going to walk through a USB 3 Device Transmitter Test using TekExpress.A USB 3 Transmitter test consists of acquiring the signal from a USB 3 Device and running it through various tests …
Numéro de la FAQ69376
Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?
The P7700 Series TriMode Probes are compatible with all DSA DPO MSO 70000 Series real-time oscilloscopes running Windows 7 or Windows 10 and firmware version 10.6 or higher. Oscilloscopes capable of these requirements include the following: · …
Numéro de la FAQ255371
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
Numéro de la FAQ69186
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
Numéro de la FAQ64776
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
Numéro de la FAQ58421
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
Numéro de la FAQ60306
What are some best practices that I should use when operating a Tektronix MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, or DSA70000/B/C/D oscillosope?  
You can refer to our Best Practices guide at: www.tek.com/dl/81W_23825_1.pdf Included in the guide is information regarding the following subject areas: Preventing Electrostatic Discharge Signal Path Compensation and instrument …
Numéro de la FAQ69171
I am having difficulty in restoring the OS on my Tektronix Win7 64Bit oscilloscope.  I am seeing the following Acronis messages:   
Possible reasons for failure to restore include:Poor media quality – DVD’s maybe scratched or otherwise damageDefective DVD readerNot waiting for disk to spin up to speed before clicking “OK” buttonRestoring onto the wrong hard driveHard drive …
Numéro de la FAQ64661
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
Numéro de la FAQ64826
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
Numéro de la FAQ69176
Where do I download or find HDMI Direct Synthesis AWG Patterns?
The pattern files for HDMI Direct Synthesis (DS) AWG pattern files are distributed on three DVDs when you order option HT3-DS for your oscilloscope. You will need to download TDSHT3 software onto your oscilloscope and install the new key code that …
Numéro de la FAQ64801
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
Numéro de la FAQ782291
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
Numéro de la FAQ64561
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
Numéro de la FAQ471231
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
Numéro de la FAQ66221
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
Numéro de la FAQ69346
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
Numéro de la FAQ64761
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
Numéro de la FAQ468146
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
Numéro de la FAQ64771
How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?
The best answer on how to do receiver SATA testing with an AWG is to look at the Method of Implementation (MOI). This can be found here MOI. This guide will walk through all the manual tests that are needed and performed for compliance testing …
Numéro de la FAQ64701
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
Numéro de la FAQ64691
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
Numéro de la FAQ62256
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
Numéro de la FAQ59621
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
Numéro de la FAQ63686
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
Numéro de la FAQ60041
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
Numéro de la FAQ64516
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
Numéro de la FAQ69181
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
Numéro de la FAQ64726
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
Numéro de la FAQ60156
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
Numéro de la FAQ467706
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
Numéro de la FAQ471576
Digital and Mixed Signal Oscilloscopes
Engineers rely on an oscilloscope throughout their design cycle, from prototype turn-on to production testing. The MSO/DPO70000 Series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance and analysis accelerate …

Numéro du document : 55W-23446-33
Datasheet
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077408
Aide en ligne
DPOJET Jitter, Noise and Eye Diagram Analysis Solution
DPOJET Jitter, Noise and Eye Diagram Analysis Solution Printable Application Help

DPOJET is a jitter, noise, timing, and eye analysis tool for Tektronix Performance Digital Oscilloscopes (DPO5000/B, MSO5000/B, DPO7000C, DPO70000C/D/DX, DSA70000C/D, MSO70000/C/DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, and DPO77002SX series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals. DPOJET revolutionized jitter analysis by adding noise analysis.


Numéro de référence : 077004827
Utilisateur
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004826
Utilisateur
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022411
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


Numéro de référence : 077001025
Programmation
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077407
Aide en ligne
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004825
Utilisateur
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


Numéro de référence : 077022011
Programmation
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077406
Aide en ligne
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


Numéro de référence : 077001810
Utilisateur
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298006
Utilisateur principal
TekExpress 10G-KR
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution

For version 1.1.0.X and above. TekExpress 10G-KR provides compliance testing, debugging, and protocol decoding for 10G-KR transmitter interfaces and devices to IEEE 802.3ap-2007 specifications. This is a PDF file of the 10G-KR online help content.


Numéro de référence : 077070103
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006315
Vérification des performances
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004823
Utilisateur
TekExpress
DisplayPort Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062106
Utilisateur principal
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022305
Programmation
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004822
Utilisateur
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077405
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006220
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001023
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298005
Utilisateur principal
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001022
Programmation
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062105
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006314
Vérification des performances
DPOJET Opt. PCE, PCE3, and PCE4
PCI Express Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug and Characterization Technical Reference

This document provides the procedures for making PCI Express measurements with Tektronix DPO/DSA70000 Series Oscilloscopes with DPOJET (Jitter and Eye Analysis Tools) and probing solutions.
Numéro de référence : 077026701
Utilisateur principal
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution Online Help

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077404
Aide en ligne
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021106
Utilisateur
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
Numéro de référence : 077069300
Utilisateur
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062104
Utilisateur principal
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022304
Programmation
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
Numéro de référence : 077001809
Utilisateur
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077125301
Utilisateur principal
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062103
Utilisateur principal
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
Numéro de référence : 071298905
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001021
Programmation
TekExpress 10G-KR
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution Online Help

For version 1.1.0.X and above. TekExpress 10G-KR provides compliance testing, debugging, and protocol decoding for 10G-KR transmitter interfaces and devices to IEEE 802.3ap-2007 specifications. This is a PDF file of the 10G-KR online help content.
Numéro de référence : 077070102
Utilisateur principal
TekExpress SFP+ QSFP+ Tx
Compliance and Debug Solution Online Help

This document contains installation and operation information and instructions for the TekExpress SFP+QSFP+TX Compliance and Debug Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077059005
Utilisateur principal
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022410
Utilisateur
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution Online Help

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077403
Aide en ligne
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077125300
Utilisateur principal
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001020
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006217
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001019
Programmation
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
Numéro de référence : 075103804
Service
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006216
Aide en ligne
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022010
Programmation
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
Numéro de référence : 071298904
Utilisateur
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.
Numéro de référence : 071298903
Utilisateur
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
Numéro de référence : 077007610
Service
TF-TekProtect Health Checker
Health Checker Declassification document Other

This document contains instructions for declassification of a TF-TekProtect Health Checker.
Numéro de référence : 077107600
Déclassification
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062102
Utilisateur principal
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021104
Utilisateur
TekExpress MHL
Automated Test Solutions Online Help

MHL software version 2.0.x and above. TekExpress MHL provides an efficient way to test MHL transmitter and receiver interfaces and devices to MHL standards and test specifications CTS1.1/1.2/2.0. This document is a PDF of the MHL online help content.
Numéro de référence : 077062004
Utilisateur principal
TekExpress M-PHY Receiver Automated Test Solution
TekExpress M-PHY Receiver Automation Test Solution Online Help

For TekExpress M-PHY RX SW release 3.0.x and above. Printable online help for the TekExpress M-PHY Receiver Automated Test Solution application.
Numéro de référence : 077064302
Aide en ligne
TekExpress
HDM Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
Numéro de référence : 077092600
Aide en ligne
DDR
Analysis Online Help

DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes(DPO7000, DSA/DPO/MSO70000/B series). DDR Analysis requires Jitter and Eye Diagram Analysis Tool (Opt.DJA) and the advanced Search and Mark capability (Opt. ASM).
Numéro de référence : 077023108
Aide en ligne
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062101
Utilisateur principal
TekExpress MHL
Automated Test Solutions Online Help

MHL software version 2.0.x and above. TekExpress MHL provides an efficient way to test MHL transmitter and receiver interfaces and devices to MHL standards and test specifications CTS1.1/1.2/2.0. This document is a PDF of the MHL online help content.
Numéro de référence : 077062005
Utilisateur principal
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001018
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
Numéro de référence : 071298004
Utilisateur principal
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
Numéro de référence : 077024507
Déclassification
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006214
Aide en ligne
016-1983-02, 016-1985-02, and 016-1988-02 and above
Rackmount Kits Instructions

This document supports installing Tektronix DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, AWG5000, and AWG7000 Series instruments in a standard 19-inch equipment rack.
Numéro de référence : 075103901
Instructions d’installation sur site
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021103
Utilisateur
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Designed to support the DIGIRF V32 protocol, MPHY enables faster data transfer rates with the help of an embedded clock. M-PHY is capable of transmitting signals both in the burst mode and in the differential mode of data transfer. M-PHY works either with an independent clock embedded at the Transmitter and the Receiver or with a single clock as reference.
Numéro de référence : 077051801
Utilisateur
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Contains the methods of implementation (MIO) information for DPOJET option D-PHY, for verification, debug, characterization, compliance and interoperability testing.
Numéro de référence : 077042801
Utilisateur
10G-KR
Automated Test Solution Read This First

This document describes how to download and install the TekExpress 10G-KR Automation Solution software.
Numéro de référence : 061438801
Instructions d’installation sur site
TeKExpress USB-3.0 (USB-RMT)
Automated Receiver Compliance and Margin Test Solutions Online Help

Supports SW V2.0.X and greater. TekExpress USB-RMT provides a complete solution for USB 3.0 receiver verification, characterization, debug, and compliance testing. This document is a printable version of the application online help.
Numéro de référence : 077045803
Utilisateur
TCA-292D
Adapter Instructions

This document lists the specifications and how to use the TCA-292D Adapter.
Numéro de référence : 071299001
Utilisateur
TekExpress MHL
Test Adapter Test Fixtures Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301303
Utilisateur
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022005
Programmation
TekExpress M-PHY Receiver Automated Test Solution
TekExpress M-PHY Receiver Automation Test Solution Online Help

For TekExpress M-PHY RX SW release 2.0.x and above. Printable online help for the TekExpress M-PHY Receiver Automated Test Solution application.
Numéro de référence : 077064301
Aide en ligne
TekExpress
MHL Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers. The MHL solution supports test automation in the TekExpress framework providing customers with a complete solution for MHL verification, characterization, debug, and compliance.
Numéro de référence : 077062002
Aide en ligne
TekExpress
MHL Test Adapter Test Fixture Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301302
Utilisateur
10G-KR
Automated Test Solution Read This First

This document describes how to download and install the TekExpress 10G-KR Automation Solution software.
Numéro de référence : 061438800
Instructions d’installation sur site
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
Numéro de référence : 071285101
Instructions d’installation sur site
TekExpress
MHL Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers. The MHL solution supports test automation in the TekExpress framework providing customers with a complete solution for MHL verification, characterization, debug, and compliance.
Numéro de référence : 077062001
Aide en ligne
SDLA
Serial Data Link Analysis Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021102
Utilisateur
TekExpress
MHL Test Adapter Test Fixture Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301300
Utilisateur
TekExpress M-PHY Receiver Automated Solution
TekExpress M-PHY Receiver Automation Solution Online Help Online Help

The TekExpress M-PHY application allows conformance testing to the latest MIPI M-PHY Conformance Test Suite.
Numéro de référence : 077064300
Aide en ligne
TCA-292D
Adapter Instructions

This document lists the specifications and how to use the TCA-292D Adapter.
Numéro de référence : 071299000
Utilisateur
Read This First - SFP, Test Fixture
Information on SFP+ Test Fixtures Read This First

This document contains a table describing the versions of the SFP+ Test Fixtures.
Numéro de référence : 071301400
Utilisateur
TekExpress
DisplayPort Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
Numéro de référence : 077062100
Aide en ligne
Thunderbolt
Test Fixture Read This First

This document contains information on the Thunderbolt Plug and Receptacle Test Adapters.
Numéro de référence : 071296800
Utilisateur
Logic Probe Deskew Fixture
P/N 067-2298-00 Instructions

This document provides instructions for using a deskew fixture to time-align trigger signals from logic probes.
Numéro de référence : 071285000
Utilisateur
P6750
Logic Probe Instructions

This document provides user information for the P6750 Logic Probe.
Numéro de référence : 071284900
Utilisateur
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
Numéro de référence : 077006305
Vérification des performances
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Designed to support the DIGIRF V32 protocol, MPHY enables faster data transfer rates with the help of an embedded clock. M PHY is capable of transmitting signals both in the burst mode and in the differential mode of data transfer. M PHY works either with an independent clock embedded at the Transmitter and the Receiver or with a single clock as reference.
Numéro de référence : 077051800
Utilisateur
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7, Win10, V10.5.0
The Tektronix Option PCE3 (Gen1/2/3/4) and Option PCE5 (Gen5) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152812
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.5.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155514
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-112G-VSR , OIF-CEI-56G-MR, OIF-CEI-56G-LR, IEEE-AUI4, IEEE-CR4 and IEEE-KR4 Conformance and Characterization Solution for Real Time Oscilloscopes - v10.1.0
400G-TXE offers streamlined and fully automated transmitter characterization OIF (VSR, LR and MR) and IEEE(802.3bs Draft 3.5 and 802.3cd Draft 3.5) PAM4 standards. It extends PAM4 software package for in-depth analysis and debug of fully automated …

Numéro de référence : 066209000
Application
TekExpress M-PHY TX Automated Solution - v10.1.0
TekExpress M-PHY Tx is an automated test system for testing the M-PHY compliance-conformance of HS, PWM and SYS signals.Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest M-PHY Spec v4.1. It …

Numéro de référence : 066208400
Application
HDMI 2.1 FRL TX/RX
The TekExpress FRL compliance application gives you the tools to easily run the High Definition Multimedia Interface (HDMI) tests under the HDMI compliance test specification 2.1. With this application you can run 9 Source and 5 Sink measurement …

Numéro de référence : 066202401
Application
TekExpress USB3.2 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.7
The TekExpress USB3.2 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.2 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155421
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186017
Application
TekExpress HDM - MSO/DSA/DPO70000C, D, DX, SX - V10.1.1
The Tektronix TekExpress HDM is an automated test solution for testing the HDMI compliance for Physical Layer Solution of HDMI DUTs as per CTS 2.0. Software also supports HDM1.4 Sink testing. This release also supports updated HF1-2 and HF1-7 …

Numéro de référence : 066206800
Application
TDSHT3 - DPO-MSO70000C-D-DX -SX - Win10 - V5.3.6
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. The TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066206200
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164515
Application
DDRA - DDR Analysis (DPO/DSA/MSO, 5K/7K/70K B/C/D/DX/SX Series) - Win10 - V10.2.0
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are required …

Numéro de référence : 066189005
Application
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066196756
Application
Tektronix TekExpress LVDS Automated test solution on 70KC Series Scopes - V10.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization for 70KC Series Scopes.

Numéro de référence : 066170912
Application
TekExpress SATA - DPO-DSA-MSO70000 - C, D, DX, SX - Win7 Win10 - V10.3.2
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows7 / Windows10 system software. DPOJET (option DJA) must be …

Numéro de référence : 066178307
Application
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093812
Pilote
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-C, D, DX, SX - Win7-Win10 - V10.3.5
The Tektronix DisplayPort Transmitter (DPTx) is an automated compliance and debug test system for testing DisplayPort (DP) Source devices of standard and Type C connectors that support Spec version DP1.2b and CTS 1.4 DPTx options - TekExpress DPTx …

Numéro de référence : 066161210
Application
TekExpress USB3.2 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.6
The TekExpress USB3.2 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.2 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155420
Application
PAM4 Analysis DPO70000DX DPO70000SX Win10 - V10.7.0
The following new major features are added into this release:? New measurements: EOJ-per-transition, sigm_n-per-PAM-level (Electrical) RINxOMA, OMA-TDECQ, Ceq (Optical)? Scope noise compensation for selected measurements, such as EH5/6, SNDR, Jrms …

Numéro de référence : 066181407
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.6.1
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling and loss caused by fixtures, cables and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded with …

Numéro de référence : 066134214
Application
TekExpress DPHY TX on DPO-MSO 5K/7K/70KC/DX - V11.1.0
TekExpress D-PHY Tx software provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.2 and the D-PHY conformance test specification v1.2 …

Numéro de référence : 066170811
Application
HDMI2.1-eARC _v10.0.0
The Tektronix TekExpress eARC is an automated test solution for testing Enhance Audio Return Channel for 13 electrical Transmitter and 10 electrical Receiver measurements.

Numéro de référence : 066202300
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179007
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.5
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155419
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.5.8
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134213
Application
Performance DPO Firmware (Win7 Only) for DPO70000SX, MSO/DPO70000DX, DSA/DPO70000D and MSO/DSA/DPO70000C
This is the latest firmware for the following products: DPO70404C, DPO70604C, DPO70804C,DPO71254C, DPO71604C, DPO72004C,DPO72504D, DPO73304D, DPO72304DX, DPO72504DX, DPO73304DX,DSA70404C, DSA70604C, DSA70804C,DSA71254C, DSA71604C, DSA72004C,DSA72504D …

Numéro de référence : 066170724
Firmware
Deployment Package (Win10 Only) for DPO/DSA70000D, DPO/MSO70000DX, DPO70000SX - V10.10.1.10
Deployment Package for DPO70000D, DSA70000D, DPO70000DX, MSO70000DX and DPO70000SX. It contains the TekScope Firmware and compatible application software.This firmware version is ONLY for scopes running Microsoft Windows 10 (64-bit).This software is …

Numéro de référence : 066141838
Firmware
eDP - MSO/DSA/DPO 70000 C/D/DX/SX - Win7, Win10 - V10.1.0
Tektronix eDP DPOJET Essential Option provides engineers an easy and fast way to debug and perform compliance testing for eDP Tx devices.

Numéro de référence : 066150007
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186016
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.4.5
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155511
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7, Win10, V10.4.3
The Tektronix Option PCE3 (Gen1/2/3) and Option PCE4 (Gen4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG? specifications …

Numéro de référence : 066152811
Application
eDP1.4 - MSO/DSA/DPO 70000 C/D/DX/SX - Win7, Win10 - V10.0.1
The Tektronix eDP1.4 (Embedded DisplayPort) DPOJET Essentials Option provides engineers with an easy, fast and efficient way to debug and perform compliance testing for eDP1.4 Tx devices.

Numéro de référence : 066150012
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

Numéro de référence : 066186015
Application
TekExpress SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX-SX - V10.2.2
The Tektronix SFP-TX is an automated compliance and debugs test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution.SFP-TX:- TekExpress SFP+ QSFP+ Tx, Automated compliance solution- SFP+ QSFP+ Tx, a DPOJET Plug-in, a debug solutionSFP …

Numéro de référence : 066189103
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.4.3
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134212
Application
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Windows 7 & Windows 10 - V1.0.2.4
Cable and fixture characterization and De-embed software.Quick characterization of the insertion loss and phase response of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and creation of de-embed filters based …

Numéro de référence : 066184203
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win7 and win10 - V10.6.0
The following new major features are added into this release:• Improved TDECQ measurement methodology to align with the latest IEEE specifications• Addition of TDECQ FFE tap auto-set and user-input capability

Numéro de référence : 066181406
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V10.2.5 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.- TekExpress 100G-TXE Automated compliance solution- CR4, KR4 and CAUI-4 DPOJET Plug-in …

Numéro de référence : 066187706
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v10.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

Numéro de référence : 066196601
Application
Deployment Package (Win10 Only) for DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/MSO70000DX, DPO70000SX - V10.9.1
Deployment Package for DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX and DPO70000SX. It contains the TekScope Firmware and compatible application software.This firmware version is ONLY for scopes running Microsoft …

Numéro de référence : 066141834
Firmware
Performance DPO Firmware for DPO70000SX, MSO/DPO70000DX, DSA/DPO70000D and MSO/DSA/DPO70000C - V10.8.7.25
This is the latest firmware for the following products: DPO70404C, DPO70604C, DPO70804C,DPO71254C, DPO71604C, DPO72004C,DPO72504D, DPO73304D, DPO72304DX, DPO72504DX, DPO73304DX,DSA70404C, DSA70604C, DSA70804C,DSA71254C, DSA71604C, DSA72004C,DSA72504D …

Numéro de référence : 066170717
Firmware
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.3
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155418
Application
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution - V10.2.0
The Tektronix 10G-KR is an automated compliance and Debug test system for testing 10G-KR and 40G-KR4 along with Protocol Decode Solution.10G-KR option supports:- TekExpress 10G-KR, Automated compliance test for 10G-KR device and 40G-KR4 device, and a …

Numéro de référence : 066197600
Application
TekExpress D-PHY TX Automated Solution Win7/Win10 - V10.0.2
TekExpress software with Option D-PHY TX provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.0 & v1.1 & v1.2 and the D-PHY …

Numéro de référence : 066189801
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-112G-VSR , OIF-CEI-56G-MR, OIF-CEI-56G-LR, IEEE-AUI4, IEEE-CR4 and IEEE-KR4 Conformance and Characterization Solution for Real Time Oscilloscopes - v10.0.1.125
400G-TXE offers streamlined and fully automated transmitter characterization OIF (VSR, LR and MR) and IEEE(802.3bs Draft 3.5 and 802.3cd Draft 3.0) PAM4 standards. It extends PAM4 software package for in-depth analysis and debug of fully automated …

Numéro de référence : 066192502
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

Numéro de référence : 066186008
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

Numéro de référence : 066141832
Firmware
TekExpress SAS-3 Transmitter Solution - DPO-DSA-MSO70000-C,D,DX,SX - Win 7 Win10 - V10.2.5
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156306
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164512
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179006
Application
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

Numéro de référence : 066166806
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - V10.0.1
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066187401
Application
10G-KR Compliance and Debug Solution-DPOJET - DPO-DSA-MSO70000-C,D,DX,SX , V10.1.2
Tektronix 10G-KR Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for 10G-KR devices.DPOJET setup files for N1N0, PRBS11 and PRBS31 patterns are provided with the 10G-KR which help set scope …

Numéro de référence : 066188302
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.2
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution.40G-CR4:- TekExpress 40GBase-CR4 Automated compliance solution- 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188602
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-56G-MR & OIF-CEI-56G-LR Conformance and Characterization Solution for Real Time Oscilloscopes - v1.0.1
400G-TXE offers streamlined and fully automated transmitter characterization of OIF-CEI-56G-VSR, OIF-CEI-56G-MR, and OIF-CEI-56G-LR electrical transmitter specifications. It extends PAM4 software package for in-depth analysis and debug of fully …

Numéro de référence : 066192501
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.2.3 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.- TekExpress 100G-TXE Automated compliance solution- CR4, KR4 and CAUI-4 DPOJET Plug-in …

Numéro de référence : 066187704
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v1.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

Numéro de référence : 066196600
Application
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066180101
Application
PAM4 Analysis - DPO70000DX - DPO70000SX – Win 7 - Win 10 - v10.5.0
The following new major features are added into this release• • Addition of the IEEE measurements J4, Jrms, EOJ, Transition time, SNR_ISI• Addition of the TDECQ measurement• Full public support of optical measurements, enabled by a separate option …

Numéro de référence : 066181405
Application
DPOJET SAS Tx Compliance Test Application DPO-DSA-MSO 70000C,D,DX,SX - Win7 Win10 - v10.2.1
The new DPOJET SAS solution provides measurements for SAS 22.5Gbps, 12Gbps, 6Gbps, 3Gbps and 1.5Gbps and OOB Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet …

Numéro de référence : 066156409
Application
eDP - MSO/DSA/DPO 70000 C/D/DX/SX - Win7 - V10.0.0
The Tektronix eDP DPOJET Essential Option provides engineers an easy and fast way to debug and perform compliance testing for eDP Tx devices.

Numéro de référence : 066150006
Application
TekExpress M-PHY TX Automated Solution - V10.0.3
The Tektronix TekExpress M-PHY Tx Automated Solution option provides Design and Validation Engineers with an Easy and Fast Way to Debug and perform Compliance Testing for MPHY devices

Numéro de référence : 066188102
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.2
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options ‚USB3 Essentials‚ …

Numéro de référence : 066155417
Application
TekExpress HDM - MSO/DSA/DPO70000C, D, DX, SX - V10.1.0
HDMI 2.0 Advanced Analysis and Compliance Software for Real Time Oscilloscope .

Numéro de référence : 066176309
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164511
Application
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX) - V10.8.1
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.

This software …

Numéro de référence : 066141829
Firmware
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

Numéro de référence : 066170109
Application
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

Numéro de référence : 066151905
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

Numéro de référence : 066142807
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.2.2 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.
- TekExpress 100G-TXE Automated compliance solution
- CR4, KR4 and CAUI-4 DPOJET …

Numéro de référence : 066187703
Application
TekExpress C-PHY Tx Essentials Debug Solution - V10.0.2
The Tektronix C-PHY Tx Essentials Option provides Design and Validation Engineers an easy and fast way to debug and perform Compliance Testing for CPHY devices.

This software applies to Tekscope 10.3.0 or above and DPOJET 10.0.0 or above.

Numéro de référence : 066188001
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.3.0
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155415
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.1
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4: - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188601
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - SX Win7 - V10.0.2
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163807
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164510
Application
DisplayPort DP-AUX software - V1.1.0
DP-AUX software for controlling DisplayPort 1.2 DUT's when connected using Tektronix DP AUX controller.

Numéro de référence : 066161211
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.4.0
The following new features are added into this release: -Support for OIF-CEI electrical compliance (UUGJ, UBHPJ, Even-Odd jitter -Support higher-order CTLE, horizontal mask metrics, etc) -Automatic symbol-rate detection -Improved FFE and DFE …

Numéro de référence : 066181404
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7 - V3.0.2
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior. Simulation circuits can be embedded …

Numéro de référence : 066134211
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.2.1
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152806
Application
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

Numéro de référence : 066169913
Application
SFP QSFP Compliance and Debug Solution-DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - Win7 - V10.1.1
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066191200
Application
TDSHT3 - DPO-MSO70000C-D-DX -SX - Win7 - V5.3.6
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. The TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066156005
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179005
Application
TekExpress SAS-3 Transmitter Solution - DPO-DSA-MSO70000-C,D,DX,SX - Win 7 - V10.2.2
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156304
Application
USB 3.0 Essentials - DPS-DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.2
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices. USB 3.0 options install: -'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169507
Application
Tektronix USB SSP Analysis Tool - DPS-DPO-DSA-MSO-70000-C, D, DX, SX - Win7 - v10.2.1
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156609
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C,D,DX,SX - Win7 - v10.1.1
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156406
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX,SX - Win7 - V10.2.3
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178303
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.1
The Tektronix DPHY Analysis solution, Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066190900
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.1
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155413
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142805
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.1.1
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152805
Application
TekExpress HEAC - DPO7000-C-DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V1.3.8
HDMI Ethernet Audio Back Channel (HEAC) which is part of HDMI 1.4a/b specifications enables networking of HDMI devices, speeds up signaling between Transmitter and Receiver devices and also provides a faster path for the audio return channel …

Numéro de référence : 066116808
Application
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

Numéro de référence : 066189001
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.1.0 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE. - TekExpress 100G-TXE Automated compliance solution - CR4, KR4 and CAUI-4 DPOJET Plug …

Numéro de référence : 066187701
Application
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

Numéro de référence : 066141820
Firmware
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093811
Pilote
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164509
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.3.0
The following new features are added into this release: • Feed-Forward Equalization (FFE) • Error detection and navigation, BER and SER monitoring • SNDR Measurement and associated plots

Numéro de référence : 066181402
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.1
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155412
Application
SFP QSFP Compliance and Debug Solution-DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - Win7 - V10.1.0
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066189700
Application
TekExpress SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX-SX - V10.1.0
The Tektronix SFP-TX is an automated compliance and debug test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution. SFP-TX : - TekExpress SFP+ QSFP+ Tx, Automated compliance solution - SFP+ QSFP+ Tx , a DPOJET Plug-in, a debug …

Numéro de référence : 066189100
Application
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Win 7 - V1.0.2
Cable and fixture characterization and De-embed software. Quick characterization of the insertion loss (crosstalk) of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and perform de-embed filter design using …

Numéro de référence : 066184202
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - SX Win7 - V10.0.1
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163806
Application
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170708
Firmware
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179002
Application
TekExpress USB RMT - DPO-DSA-MSO70000-C,D,DX - Win7 - V2.0.8
The USB-RMT Automated Test Software is a Windows based application that runs on any Tektronix Windows7 based instruments such as DPO/DSA/MSO70000 C/D/DX Series oscilloscopes. TekExpress software (TEKEXP) ordered with option USB-RMT provides an …

Numéro de référence : 066120912
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152505
Application
TekExpress D-PHY TX Automated Solution Win7, V10.0.0
Tektronix TekExpress Automated Test Software is a Windows-based application that runs on Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides unmatched automation for each …

Numéro de référence : 066188900
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.0.0
The following new features are added into this release: -Noise Analysis and Population Control -Interactive plots -Full PI Command Support -Continuous Run -Measurement logging to .csv

Numéro de référence : 066181401
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.0.45
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4: - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188600
Application
10G-KR Compliance and Debug Solution-DPOJET - DPO-DSA-MSO70000-C,D,DX,SX - Win7, V10.0.0
Tektronix 10G-KR Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for 10G-KR devices.DPOJET setup files for N1N0, PRBS11 and PRBS31 patterns are provided with the 10G-KR which help set scope …

Numéro de référence : 066188300
Application
40GBase-CR4 Debug and Compliance Solution - DPOJET - DPO-DSA-MSO70000-C,D,DX,SX - Win7, V10.0.0.44
40GBase-CR4 Debug and Automated Compliance Solution application (Option 40G-CR4) provides design engineers with an easy-to-use automated solution to test and debug 40GBASE-CR4 designs, using off-the-shelf tools, to reduce human-related measurement …

Numéro de référence : 066188400
Application
TekExpress C-PHY Tx Essentials Debug Solution - V10.0.0
The Tektronix C-PHY Tx Essentials Option provides Design and Validation Engineers an easy and fast way to debug and perform Compliance Testing for CPHY devices. This software applies to Tekscope 10.3.0 or above and DPOJET 10.0.0 or above.

Numéro de référence : 066188000
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug solution V1.0.0 DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE. - TekExpress 100G-TXE Automated compliance solution - CR4, KR4 and CAUI-4 DPOJET Plug …

Numéro de référence : 066187700
Application
Tektronix USB SSP Analysis Tool - DPO-DSA-MSO70000-C, D, DX - Win7 - V10.1.0
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156606
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152504
Application
USB 3.0 Essentials - DPO-DSA-MSO 70000C, D,DX - Win7 - v10.1.0
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices.USB 3.0 options install:-'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169505
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX,SX - Win7 - V10.2.0
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178302
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.0
The Tektronix DPHY Analysis solution,Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066184601
Application
Tektronix MIPI M-PHY Analysis Solution - Win7 - V10.0.0
The Tektronix M-PHY Analysis Solution Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices.

Numéro de référence : 066179801
Application
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7, v10.1.0
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155410
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C,D,DX,SX - Win 7 V10.1.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155504
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.1.0
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152804
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C, D, DX, SX - Win7 v10.1.0
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156405
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX,SX - Win7 V10.0.0
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066187400
Application
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170705
Firmware
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX Win 7, V1.0.1
Cable and fixture characterization and De-embed software. Quick characterization of the insertion loss (crosstalk) of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and perform de-embed filter design using …

Numéro de référence : 066184201
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

Numéro de référence : 066141813
Firmware
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

Numéro de référence : 066186000
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T & 10GBASE-T) - v1.0.0
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE802.3bz, section 126, and the NBASE-T specification. This allows you to quickly and efficiently test …

Numéro de référence : 066185200
Application
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066126309
Application
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

Numéro de référence : 066169801
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7, V6.2.0
The Tektronix DPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066184600
Application
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

Numéro de référence : 066140005
Application
Tektronix DPOJET PCI Express Analysis Tool - DPO-DSA-MSO70000 - Win7 - v6.3.0
The PCE3 application is compatible with Tektronix DPO/DSA/MSO70000 series oscilloscopes that are designed to meet the challenges of the next generation of serial data standards such as PCI Express. The Tektronix PCI Express Compliance Module and PCIe …

Numéro de référence : 066152803
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C, D, DX - Win7, V6.1.1
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156404
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - Win7 v7.0.0
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163804
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164504
Application
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066172104
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.3
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066184000
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and …

Numéro de référence : 066142803
Application
40GBase-CR4 Debug and Compliance Solution - DPOJET - DPO-DSA-MSO70000-C,D,DX - Win7 V1.0.1
40GBase-CR4 Debug and Automated Compliance Solution application (Option 40G-CR4) provides design engineers with an easy-to-use automated solution to test and debug 40GBASE-CR4 designs, using off-the-shelf tools, to reduce human-related measurement …

Numéro de référence : 066170501
Application
REPORT GENERATOR V3.3.3 - DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports. The Report Generator automates the …

Numéro de référence : 066183700
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, Win 7, V2.3.1
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior. Simulation circuits can be embedded …

Numéro de référence : 066134209
Application
PAM4 Analysis - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V1.0.2
- The PAM4 Analysis application runs on the following oscilloscopes. DPO/MSO73304DX DPO73304SX DPO77002SX DPS73308SX DPS77004SX - To operate this application, your scope will require the DPOJET Jitter + Noise application (DJAN) and its option key. In …

Numéro de référence : 066181400
Application
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.6
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155409
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX - Win7 - V1.0.5
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178301
Application
TekExpress D-PHY TX Automated Solution Win7, V3.3.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on Windows7 computer operating system, including Tektronix Windows-based instruments. TekExpress software with Option D-PHYTX provides unmatched …

Numéro de référence : 066180200
Application
TekExpress 4.0 M-PHY TX Automated Solution - v6.2.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest …

Numéro de référence : 066179700
Application
Tektronix MIPI M-PHY Analysis Solution - Win7 v6.2.0
The Tektronix MPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices. MPHY option installs: - MPHY Essentials DPOJET Plug-in

Numéro de référence : 066179800
Application
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

Numéro de référence : 066045315
Pilote
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164503
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Win 7, V2.3.0
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134208
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX - Win7 - V1.0.1
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178300
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164502
Application
TDSDVI - DPO-DSA-MSO5K-7K-70K-B-C-D-DX - WinXp, Win7, Version 3.0.11
DVI developers require a reliable and easy-to-use test tool to perform in-house compliance testing. The DVI Compliance Test Solution enables faster validation cycles with automatic pass-fail testing over a comprehensive range of tests for …

Numéro de référence : 066134302
Application
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

Numéro de référence : 066177100
Application
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

Numéro de référence : 066177200
Application
TekExpress C-PHY Tx Essentials Debug Solution v1.0.0 - DPO-DSA-MSO70000C-D-DX - win7
The Tektronix TekExpress C-PHY Tx Essentials is an debug solution for testing the C-PHY product for MIPI DUT KeyFeature: Measure the rise time and fall time of the DUT C-PHY signals. Performs both eye height and eye height measurements, and also …

Numéro de référence : 066175700
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155503
Application
TekExpress M-PHY RX Automated Solution DPO-DSA-MSO70000--C -D-DX - Win7, V3.1.0
Tektronix TekExpress Automated Receiver M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYRX provides Simple 2-Instrument Setup based on Scope-integrated Error Detector, for single …

Numéro de référence : 066135205
Application
TekExpress ThunderBolt-Tx Compliance Solution - DPO-DSA-MSO70000-C,D,DX Win 7, V1.0.4
The TBT-TX Opt. (TekExpress® TBT Transmitter Automated Solution option), supported on DPO/DSA/MSO70000/C/D/DX models, includes TekExpress Automated Software (TekExpress Thunderbolt Tx) for testing Thunderbolt Physical Layer Transmitter. TekExpress …

Numéro de référence : 066175600
Application
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-C,D, DX - Win7, V1.2.2
The Tektronix DisplayPort Transmitter (DPTx) is an automated compliance and debug test system for testing DisplayPort (DP) Source devices that support Spec version DP1.2b DPTx options - TekExpress DPTx, Automated compliance test. DPTx provides …

Numéro de référence : 066161202
Application
TekExpress USB RMT - DPO-DSA-MSO70000-C,D,DX - Win7, v2.0.5
The USB-RMT Automated Test Software is a Windows based application that runs on any Tektronix Windows7 based instruments such as DPO/DSA/MSO70000 C/D/DX Series oscilloscopes. TekExpress software (TEKEXP) ordered with option USB-RMT provides an …

Numéro de référence : 066120911
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.1
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066151802
Application
TekExpress XGbT - 10GBASE-T Automation Solution for DPO-DSA-MSO -70000-C-D-DX Win7, V2.1.4
10GBASE-T compliance solution to address PHY layer compliance needs of 802.3-an-2006 standard. Provides an automated solution for performing Clock Frequency, Droop, Jitter-Master, and Jitter-Slave measurements in compliance with IEEE 802.3ae-2006 …

Numéro de référence : 066125706
Application
SFP QSFP Complaince and Debug Solution-DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.1.4
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066170600
Application
TekExpress SAS-3 Transmitter Solution - MSO-DPO-DSA70000C-D oscilloscopes - Win7, V1.0.3
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156302
Application
Tektronix USB SSP Analysis Tool - DPO-DSA-MSO70000-C, D, DX - Win7, V1.1.3
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156603
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142801
Application
Tektronix MIPI D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7, V6.0.1
The Tektronix DPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066169700
Application
USB 3.0 Essentials - DPO-DSA-MSO 70000C, D,DX - Win7 v6.2.2
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices. USB 3.0 options install: -'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169500
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155502
Application
Tektronix MIPI M-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 v6.1.0
The Tektronix MPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices. MPHY option installs: - MPHY Essentials DPOJET Plug-in

Numéro de référence : 066169400
Application
TDSHT3 - DPO-DSA-MSO70000-B-C-D-DX - Win XP - Win7, V5.2.9
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066156001
Application
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

Numéro de référence : 066133202
Utilitaires
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-B,C,D, DX - Win XP, Win7,V1.2.1
The Tektronix DPTx is an automated compliance and debug test system for testing the DP Source devices of DP1.2b Version.DPTx options - TekExpress DPTx, Automated compliance test.DPTX provides 10 free trials by default and need license key to enable …

Numéro de référence : 066161201
Application
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093809
Pilote
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.2
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155406
Application
SSIC Protocol Decoder Solutions Win 7 DPO-DSA-MSO70000--C-D-DX v1.0.0
Super Speed Inter-Chip (SSIC) is an optimized inter-chip version of USB3.0.The PHY layer will be MIPI MPHY and the protocol layer will be super speed USB 3.0. SSIC supports USB 3.0 speeds upto 5 Gbps. The M-PHY standard consumes lower power and …

Numéro de référence : 066164100
Application
40GBase-CR4 Compliance and Debug solution - DPO-MSO70000C-D-DX - Win 7 V1.0.0
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4 - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution 40G-CR4 provides 10 free trials by …

Numéro de référence : 1000000631
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155501
Application
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

Numéro de référence : 066142101
Application
SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX - Win 7 V3.1.0
The Tektronix SFP-TX is an automated compliance and debug test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution. SFP-TX - TekExpress SFP+ QSFP+ Tx, Automated compliance solution - SFP+ QSFP+ Tx , a DPOJET Plug-in, a debug …

Numéro de référence : 066161100
Application
TekExpress M-PHY TX Automated Solution DPO-DSA-MSO70000-B-C-D-DX Win XP - Win7, V2.1.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest …

Numéro de référence : 066139902
Application
TekExpress SAS-3 Transmitter Solution - MSO-DPO-DSA70000C-D oscilloscopes - Win7, V1.0.0
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is offered …

Numéro de référence : 066156300
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.0.107
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155500
Application
Deployment Package for DPO7KC, DPO-DSA-MSO70KC and DPO-DSA70KD Win7 series oscilloscopes V6.8.1
This software is a self-extracting executable consisting of the main oscilloscope software version 6.8.1 and the following optional applications: 1. 10G-KR Compliance, Debug, and Decode Solution, Version 6.0.1.103 2. DDRA Memory Interface …

Numéro de référence : 066141804
Firmware
TekExpress M-PHY RX Automated Solution DPO-DSA-MSO70000-B-C - Win XP - Win7, V2.1.0
Tektronix TekExpress Automated Receiver M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments.Option M-PHYRX provides Simple 2-Instrument Setup based on Scope-integrated Error Detector, for single-button …

Numéro de référence : 066135202
Application
TekExpress D-PHY TX Automated Solution DPO7000-C, DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V3.1.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on any Windows XP or Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides …

Numéro de référence : 066152200
Application
Tektronix DPOJET PCI Express Analysis Tool - DPO-DSA-MSO70000 - Win7 v6.0.1
The PCE3 application is compatible with Tektronix DPO/DSA/MSO70000 series oscilloscopes that are designed to meet the challenges of the next generation of serial data standards such as PCI Express. The Tektronix PCI Express Compliance Module and …

Numéro de référence : 066152800
Application
DSS Deskew
DSS Deskew will be used by customers who have connected two DPO/DSA70000D scopes using the DPOACQSYNC kit. The application will automatically deskew the channels of the two scopes, so that their acquisition paths are aligned prior to connecting to …

Numéro de référence : 066151700
Application
Tektronix FibreChannel-16G Analysis Tool - DPO-DSA-MSO70000-C,D - Win7 V6.0.0
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066151800
Application
10G-KR Compliance and Debug solution for DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The Tektronix 10G-KR is an automated compliance and Debug test system for testing 10G-KR and 40G-KR4 10G-KR option supports: - TekExpress 10G-KR, Automated compliance test for 10G-KR device and 40G-KR4 device, and a DPOJET Plug-in debug …

Numéro de référence : 066143301
Application
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

Numéro de référence : 066145300
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066146200
Application
Firmware - DPO7000, DPO-DSA70000, DPO-DSA70000B-C, MSO70000-C- With Doc, Win XP V5.3.5
This is the latest Windows XP firmware (released November 2012) for the DPO7054, DPO7104, DPO7254, DPO7354, DPO/DSA70404, DPO/DSA70604, DPO/DSA70804, DPO/DSA71254, DPO/DSA71604, DPO/DSA72004, DPO/DSA70404B, DPO/DSA70604B, DPO/DSA70804B …

Numéro de référence : 066079844
Firmware
TekExpress M-PHY TX Automated Solution DPO-DSA-MSO70000-B-C-D Win XP - Win7 V2.0.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest M …

Numéro de référence : 066139901
Application
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

Numéro de référence : 066077407
Application
TDSPTD - DPO7254-C, DPO7354-C, DPO-DSA-MSO70000-B-C - Win XP - Win 7
The Protocol Trigger and Decode (PTD) application enables you to decode and simultaneously display protocol-level information and physical layer signaling. The PTD application includes the following features:- Simultaneously view signal, characters …

Numéro de référence : 066063709
Application
SIGNALVU - Vector Signal Analysis Software V2.3.0173
SignalVu Vector Signal Analysis runs as an option to the MSO70000, DPO/DSA70000, DPO/DSA70000B, DPO7000, and DPO/DSA/MSO70000C (32-bit systems) series scopes. SignalVu brings the signal analysis tools of the Tektronix RSA6100A Real-Time Spectrum …

Numéro de référence : 066107808
Application
Automated Low Voltage Differential Signaling (LVDS) Measurements
Low Voltage Differential Signaling (LVDS) is a popular signaling system for applications requiring high speed data transfers using low power. This application note explains the basic elements of LVDS signaling, details measurements based on an …

Numéro du document : 48W-61639-0
Note d’application
Analyzing 8b/10b Encoded Signals with a Real-time Oscilloscope
This application note discusses troubleshooting and verifying devices with 8b/10b serial buses using the Tektronix MSO/DPO/DSA70000 Series oscilloscopes with their powerful real time triggering of 8b/10b serial buses.

Numéro du document : 55W_26438_2
Note d’application
Analyzing 26 to 53 GBd PAM4 Optical and Electrical Signals
The need to deliver data rates in excess of 50 Gb/s has created great interest in bringing next generation PAM4 components and systems to market. This paper presents techniques for analyzing 28 GBaud and 53 GBaud optical and electrical PAM4 signals …
Note d’application
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

Numéro du document : 48W-61617-0
Fiche d’informations
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

Numéro du document : 55W-61401-2
Note d’application
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes Describe electrical waveform types Understand basic …

Numéro du document : 03Z-8605-7
Guide de présentation
Using FastFrame™ Segmented Memory
This application note explains how to use FastFrame(TM) Segmented Memory feature to capture signal bursts or data packets without using memory to capture unimportant dead time.  This application note applies to the following series of …

Numéro du document : 55W-12112-2
Note d’application
2020 Tektronix and Keithley Product Catalog
We have the right products to ensure your success. Browse our new Tektronix and Keithley Product Catalog and explore our complete line of test and measurement solutions. You’ll find over 130 pages of key product details and specifications …
Guide de sélection
Project 25 Land Mobile Radio (LMR) Solution
Quick overview of the complete Tektronix solution for Project 25 Land Mobile Radio (LMR).

Numéro du document : 37W-30680-0
Fiche d’informations
Tektronix Provides Raspberry Pi with Measurement Solutions to Test and Develop Current and Next Generation High Speed Interfaces
23 GHz Mixed Signal Oscilloscope and 25GS/s Arbitrary Waveform Generators Help Raspberry Pi to Test HDMI, MIPI and USB InterfacesBRACKNELL, UK. March 20, 2017 - Tektronix, Inc., a leading worldwide provider of measurement solutions, today announced …
Actualité
Physical Layer Compliance Testing for 100BASE-TX
This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

Numéro du document : 61W-17381-3
Note d’application
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from …

Numéro du document : 55T-18412-6
Guide de présentation
Windows 7 Ultimate 64 Bit SP1 Operating System Recovery
This document instructs how to restore the instrument operating system.

Numéro du document : 55W-29757-0
Guide de présentation
SDRAM Memory Systems: Embedded Test & Measurement Challenges
DRAM (Dynamic Random Access Memory) is attractive to designers because it provides a broad range of performance and is used in a wide variety of memory system designs for computers and embedded systems. This DRAM memory primer provides an overview of …

Numéro du document : 54W-21473-2
Guide de présentation
Mixed Signal Design Guide
Modern embedded system design and computing systems have become progressively more powerful by incorporating high-speed buses, industry standard subsystems, and more integrated functionality in chips. They have also become more complex, more …

Numéro du document : 55X-24538-0
Note d’application
Maintain Signal Integrity From Bus To Oscilloscope At 30 GHz And Beyond
With serial data rates continuing to climb, the margin between pass and fail has shrunk to the point where noise from the signal and the measurement system can combine to close the eye. This technical article will provide guidance on signal integrity …

Numéro du document : NA link to another web site per Sara Rogers
Article produit
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance …

Numéro du document : 55W-61400-0
Note d’application
New Solution Boosts Accuracy of High-Speed Signal Measurements
Tektronix Introduces SignalCorrect Software, TCS70902 Calibration Source to Quickly Characterize and De-embed Interconnects BEAVERTON, Ore., Jan. 18, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, has introduced a new …
Actualité
Best Practices for MSO/DPO70000/DPO7000 Series oscilloscopes
This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.

Numéro du document : 55W-29755-0
Guide de présentation
OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes
This document identifies the OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes.

Numéro du document : 55W-29756-0
Guide de présentation
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

Numéro du document : 46W-31080-7
Guide de sélection
Debug and Validation of High Performance Mixed Signal Designs
High performance mixed analog and digital systems continue to evolve with increasing performance and complexity. Designers need to quickly find and analyze a wide range of problems from signal integrity issues such as crosstalk or jitter to bus …

Numéro du document : 55W-23433-2
Note d’application
Debugging High-Performance Designs with Mixed Signal Oscilloscopes
These are real world functional examples of how engineers have used the Tektronix MSO70000 Series Performance Mixed Signal Oscilloscope in the following three areas of electronic design: Memory High Speed Serial (PCI Express and HDMI Video) RF

Numéro du document : 55W-29444-0
Livre blanc
Inside the MSO/DPO70000DX Series
Tektronix MSO/DPO70000DX Series oscilloscopes feature a custom, highly advanced, front-end (Multi-Chip Module or MCM), that ensures that the integrity of high-speed signals are maintained before they are sampled. This delivers an industry leading …

Numéro du document : 55W-27024-0
Note d’application
iCapture™ Analog MUX
View an electrical signal in digital and analog forms simultaneously using a single voltage probe with iCapture™ Analog MUX.This white paper discusses the need for probing a circuit as well as the challenges of minimizing probe loading. In addition …

Numéro du document : 55W-24477-1
Livre blanc
DesignCon 2015 Paper – Hybrid Modeled Measured Characterization of a 320 Gbit/s Backplane System
This paper explores a case study of a multilane Ethernet backplane 320 Gbit/s system that is difficult to fully measure and deembed, implements a hybrid method of modeling, deembedding, and measurement, explores improvements to the metrology and …

Numéro du document : 55W-60047-0
Livre blanc
Dual Scope Synchronization
The Tektronix DPO/DSA/MSO70000 models above 12 GHz in bandwidth provide 50 GS/s sampling rate on each of 4 channels simultaneously, or 100 GS/s sampling rate on 2 channels in interleaved mode. With interleaved operation comes the opportunity for …

Numéro du document : 55W-26594-1
Note d’application
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …

Numéro du document : 55W-61093-1
Note d’application
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope …
Actualité
Tektronix Wins "Best in Test" 2010 Award
Prix
Tektronix Releases First Test Solution for MIPI M-PHY® Specification v3.1
Tektronix MSO/DPO70000DX Oscilloscopes, P7600 Series TriMode™ Probes Offer Industry's Lowest Noise Solution for M-PHY MeasurementsBEAVERTON, Ore., November 11, 2014 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced …
Actualité
Tektronix Named Finalist For EDN Innovation Award
Prix
Tektronix Rolls Out HDMI 2.0 Compliance Test and Debug Support
New Test Solution Enables New "4K" Video Monitor Technology for Fast, Consistent and Accurate ResultsBEAVERTON, Ore., June 10, 2014 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced that a new Method of …
Actualité
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

Numéro du document : 55W-29028-13
Guide de sélection
Remote Head Acquisition Improves High Speed Serial Measurement
As high speed serial data rates continue to increase, the need to maximize margin in measurements increases. Coaxial cables, even good quality ones can impact the measurement margin. Remote heads for oscilloscopes provide clear advantages that …

Numéro du document : 55W-29580-0
Note d’application
Ethernet Transmitter Test Application Software
The Ethernet Transmitter Test Application automates 10GBASE-T, NBASE-T, and IEEE802.3bz (2.5G/5G) physical medium attachment (PMA) physical-layer (PHY) electrical testing to provide a fast and accurate way of testing your Ethernet designs.

Numéro du document : 61W-24430-9
Datasheet
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077409
Aide en ligne
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.5.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155515
Application
Electrical Verification of DDR Memory
With the ever increasing DDR SDRAM Clock Frequencies and Signal Edge Rates, signal integrity and bus state verification techniques are increasingly important for DDR Memory design success. This application note focuses on techniques for triggering …

Numéro du document : 55W-23432-3
Note d’application
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces …

Numéro du document : 37W-23378-4
Note d’application
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use the protocol trigger, decode and search capabilities …

Numéro du document : 48W-19040-21
Note d’application
High Speed Interface Standards
This e-Guide will help you learn more about design challenges for testing PCIe 4.0, SAS, SuperSpeed USB, and DDR4 standards. Within the pages of the eGuide you will also get quick access to technical resources that will help you understand design …

Numéro du document : 55W-60038-1
Manuel d’instructions
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets – computers, cell phones, entertainment systems …

Numéro du document : 55C-16736-3
Guide de présentation
Optical Bandwidth Requirements for NRZ and PAM4 Signaling
Until recently, both optical and electrical bandwidths produced similar results but this is no longer the case with the recent IEEE spec change. This paper clarifies these terms, mathematically shows how they are related, and provides the basis to …

Numéro du document : 55W-61363-0
Livre blanc
Measurement System Signal Integrity: Important Factors to Consider
Sufficient bandwidth is a key oscilloscope requirement for making accurate measurements. However, there are a number of other factors and specifications that can help you properly perform signal integrity characterization.

Numéro du document : 55W-18024-3
Dossier technique
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
Numéro de la FAQ66181
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel …
Numéro de la FAQ64781
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter …
Numéro de la FAQ470416
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope …
Numéro de la FAQ66226
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 …
Numéro de la FAQ64766
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system …
Numéro de la FAQ64666
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
Numéro de la FAQ58571
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly …
Numéro de la FAQ69386
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to …
Numéro de la FAQ61606
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
Numéro de la FAQ64251
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
Numéro de la FAQ467516
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
Numéro de la FAQ64571
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good …
Numéro de la FAQ64756
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
Numéro de la FAQ782296
Question:  When I start the TekExpress application on my oscilloscope, I get a "Scope status returned as: PASS:UNCAL - The instrument is not fit for duty and the results might be invalid." error message.  I just had my scope calibrated so does this mean that it is now un-calibrated?
The error message you are experiencing is an bug in firmware version (V6.4.5).  This version had bug where it reports UNCAL.  This is fixed the later versions of the firmware.  I would recommend upgrading to a later version.  At the time of this FAQ …
Numéro de la FAQ64836
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64791
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one …
Numéro de la FAQ64751
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
Numéro de la FAQ247211
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
Numéro de la FAQ474266
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
Numéro de la FAQ780986
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
Numéro de la FAQ64796
How do I use TekExpress to perform a USB 3.0 Device Transmitter Test?
USB 3 Tx Testing ScriptHello and welcome to Tektronix! Today I’m going to walk through a USB 3 Device Transmitter Test using TekExpress.A USB 3 Transmitter test consists of acquiring the signal from a USB 3 Device and running it through various tests …
Numéro de la FAQ69376
Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?
The P7700 Series TriMode Probes are compatible with all DSA DPO MSO 70000 Series real-time oscilloscopes running Windows 7 or Windows 10 and firmware version 10.6 or higher. Oscilloscopes capable of these requirements include the following: · …
Numéro de la FAQ255371
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
Numéro de la FAQ69186
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus …
Numéro de la FAQ64776
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove …
Numéro de la FAQ58421
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
Numéro de la FAQ60306
What are some best practices that I should use when operating a Tektronix MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, or DSA70000/B/C/D oscillosope?  
You can refer to our Best Practices guide at: www.tek.com/dl/81W_23825_1.pdf Included in the guide is information regarding the following subject areas: Preventing Electrostatic Discharge Signal Path Compensation and instrument …
Numéro de la FAQ69171
I am having difficulty in restoring the OS on my Tektronix Win7 64Bit oscilloscope.  I am seeing the following Acronis messages:   
Possible reasons for failure to restore include:Poor media quality – DVD’s maybe scratched or otherwise damageDefective DVD readerNot waiting for disk to spin up to speed before clicking “OK” buttonRestoring onto the wrong hard driveHard drive …
Numéro de la FAQ64661
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek …
Numéro de la FAQ64826
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
Numéro de la FAQ69176
Where do I download or find HDMI Direct Synthesis AWG Patterns?
The pattern files for HDMI Direct Synthesis (DS) AWG pattern files are distributed on three DVDs when you order option HT3-DS for your oscilloscope. You will need to download TDSHT3 software onto your oscilloscope and install the new key code that …
Numéro de la FAQ64801
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
Numéro de la FAQ782291
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
Numéro de la FAQ64561
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
Numéro de la FAQ471231
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
Numéro de la FAQ66221
Can I load a standard copy of Windows OS on my Tektronix oscilloscope that is runing Windows XP or Win7?
No, as the OS we are using is NOT 100% the same as the standard Window OS.  It may have the same base name, such as Windows 7 Ultimate 64-bit: however to make it work with our hardware and instrument s/w we do incorporate some modifications  in the …
Numéro de la FAQ69346
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with …
Numéro de la FAQ64761
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct …
Numéro de la FAQ468146
How Do I Set Up a Parallel Bus Decode?
For doing Parallel Bus decode Tektronix recommends using a MSO or MDO + MSO option Series oscilloscopes. This feature comes standard in the Bus menu and can be used in a variety of ways. Start by turning it on, selecting the channel and setting your …
Numéro de la FAQ64771
How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?
The best answer on how to do receiver SATA testing with an AWG is to look at the Method of Implementation (MOI). This can be found here MOI. This guide will walk through all the manual tests that are needed and performed for compliance testing …
Numéro de la FAQ64701
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample …
Numéro de la FAQ64691
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more …
Numéro de la FAQ62256
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs …
Numéro de la FAQ59621
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
Numéro de la FAQ63686
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's …
Numéro de la FAQ60041
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to …
Numéro de la FAQ64516
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
Numéro de la FAQ69181
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure …
Numéro de la FAQ64726
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was …
Numéro de la FAQ60156
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be …
Numéro de la FAQ467706
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp …
Numéro de la FAQ471576
Digital and Mixed Signal Oscilloscopes
Engineers rely on an oscilloscope throughout their design cycle, from prototype turn-on to production testing. The MSO/DPO70000 Series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance and analysis accelerate …

Numéro du document : 55W-23446-33
Datasheet
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077408
Aide en ligne
DPOJET Jitter, Noise and Eye Diagram Analysis Solution
DPOJET Jitter, Noise and Eye Diagram Analysis Solution Printable Application Help

DPOJET is a jitter, noise, timing, and eye analysis tool for Tektronix Performance Digital Oscilloscopes (DPO5000/B, MSO5000/B, DPO7000C, DPO70000C/D/DX, DSA70000C/D, MSO70000/C/DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, and DPO77002SX series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals. DPOJET revolutionized jitter analysis by adding noise analysis.


Numéro de référence : 077004827
Utilisateur
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004826
Utilisateur
SignalVu Essentials
Vector Signal Analysis Software

This document provides an overview of the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022411
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

This programmer manual provides you with the information required to useProgrammable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).


Numéro de référence : 077001025
Programmation
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077407
Aide en ligne
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004825
Utilisateur
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


Numéro de référence : 077022011
Programmation
TekExpress PCI Express
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077406
Aide en ligne
DPOPWR Advanced
Advanced Power Analysis Software

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.


Numéro de référence : 077001810
Utilisateur
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298006
Utilisateur principal
TekExpress 10G-KR
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution

For version 1.1.0.X and above. TekExpress 10G-KR provides compliance testing, debugging, and protocol decoding for 10G-KR transmitter interfaces and devices to IEEE 802.3ap-2007 specifications. This is a PDF file of the 10G-KR online help content.


Numéro de référence : 077070103
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006315
Vérification des performances
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004823
Utilisateur
TekExpress
DisplayPort Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062106
Utilisateur principal
SignalVu
SignalVu Vector Signal Analysis Software

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.


Numéro de référence : 077022305
Programmation
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital Oscilloscopes (DPO7000, DSA/DPO70000/B/C, and MSO70000/C series). DPOJET enables you to achieve new levels of productivity, efficiency, and measurement reliability on complex clock, digital, and serial data signals.


Numéro de référence : 077004822
Utilisateur
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.


Numéro de référence : 077077405
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006220
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001023
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in thismanual.


Numéro de référence : 071298005
Utilisateur principal
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001022
Programmation
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062105
Utilisateur principal
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

For firmware version 6.7.0 and above. This document contains the specifications and performance verification procedures for the instruments.


Numéro de référence : 077006314
Vérification des performances
DPOJET Opt. PCE, PCE3, and PCE4
PCI Express Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug and Characterization Technical Reference

This document provides the procedures for making PCI Express measurements with Tektronix DPO/DSA70000 Series Oscilloscopes with DPOJET (Jitter and Eye Analysis Tools) and probing solutions.
Numéro de référence : 077026701
Utilisateur principal
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution Online Help

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077404
Aide en ligne
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021106
Utilisateur
ADK
Application Developer Kit Online Help

This document is a printable version of the online help. The Application Developer Kit (ADK) provides tools for oscilloscope users and third parties to create custom applications for Tektronix oscilloscopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well integrated applications using Tektronix user interface controls. ADK also provides developers access to use the oscilloscope license mechanism to optionally license the application.
Numéro de référence : 077069300
Utilisateur
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062104
Utilisateur principal
SignalVu
SignalVu Vector Signal Analysis Software Programmer Manual

This document provides supplementary information about the remote commands for the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022304
Programmation
DPOPWR Advanced
Advanced Power Analysis Software Online Help

DPOPWR is a power measurement and analysis software that runs on MSO/DPO5000/B, DPO7000/C, MSO/DSA/DPO70000/C/D, and MSO/DPO70000DX series oscilloscopes. DPOPWR allows you to acquire, measure, and analyze various switching power supply signals at different test points. The application provides a simple and direct means of obtaining results about Switching devices, Magnetic components, and Compliance tests to EN 61000-3-2 Std for the Switch Mode Power Supply.
Numéro de référence : 077001809
Utilisateur
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077125301
Utilisateur principal
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062103
Utilisateur principal
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
Numéro de référence : 071298905
Utilisateur
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001021
Programmation
TekExpress 10G-KR
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution Online Help

For version 1.1.0.X and above. TekExpress 10G-KR provides compliance testing, debugging, and protocol decoding for 10G-KR transmitter interfaces and devices to IEEE 802.3ap-2007 specifications. This is a PDF file of the 10G-KR online help content.
Numéro de référence : 077070102
Utilisateur principal
TekExpress SFP+ QSFP+ Tx
Compliance and Debug Solution Online Help

This document contains installation and operation information and instructions for the TekExpress SFP+QSFP+TX Compliance and Debug Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077059005
Utilisateur principal
SignalVu Essentials
Vector Signal Analysis Software Reference

This document provides an overview of the SignalVu Vector Signal Analysis Software.
Numéro de référence : 077022410
Utilisateur
TekExpress PCI Express (PCE3)
Transmitter Compliance and Debug Software Solution Online Help

This printable version of the TekExpress PCI Express application help provides information on using the application to take TekExpress PCI Express Transmitter Compliance and Testing Solution Software application.
Numéro de référence : 077077403
Aide en ligne
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Numéro de référence : 077125300
Utilisateur principal
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001020
Programmation
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006217
Aide en ligne
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX/SX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001019
Programmation
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

This kit provides instructions to install upgrades on MSO70000/C/DX, DSA70000/B/C/D, DPO70000/B/C/D/DX, DPO7000/C, MSO5000, and DPO5000 Series instruments.
Numéro de référence : 075103804
Service
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006216
Aide en ligne
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022010
Programmation
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D/DX/SX and DSA70000/B/C/D Series products.
Numéro de référence : 071298904
Utilisateur
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, and DSA70000/B/C/D User Manual

This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.
Numéro de référence : 071298903
Utilisateur
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

This manual contains service information for your instrument.
Numéro de référence : 077007610
Service
TF-TekProtect Health Checker
Health Checker Declassification document Other

This document contains instructions for declassification of a TF-TekProtect Health Checker.
Numéro de référence : 077107600
Déclassification
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062102
Utilisateur principal
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021104
Utilisateur
TekExpress MHL
Automated Test Solutions Online Help

MHL software version 2.0.x and above. TekExpress MHL provides an efficient way to test MHL transmitter and receiver interfaces and devices to MHL standards and test specifications CTS1.1/1.2/2.0. This document is a PDF of the MHL online help content.
Numéro de référence : 077062004
Utilisateur principal
TekExpress M-PHY Receiver Automated Test Solution
TekExpress M-PHY Receiver Automation Test Solution Online Help

For TekExpress M-PHY RX SW release 3.0.x and above. Printable online help for the TekExpress M-PHY Receiver Automated Test Solution application.
Numéro de référence : 077064302
Aide en ligne
TekExpress
HDM Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
Numéro de référence : 077092600
Aide en ligne
DDR
Analysis Online Help

DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes(DPO7000, DSA/DPO/MSO70000/B series). DDR Analysis requires Jitter and Eye Diagram Analysis Tool (Opt.DJA) and the advanced Search and Mark capability (Opt. ASM).
Numéro de référence : 077023108
Aide en ligne
TekExpress DisplayPort
Automated Solutions

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.


Numéro de référence : 077062101
Utilisateur principal
TekExpress MHL
Automated Test Solutions Online Help

MHL software version 2.0.x and above. TekExpress MHL provides an efficient way to test MHL transmitter and receiver interfaces and devices to MHL standards and test specifications CTS1.1/1.2/2.0. This document is a PDF of the MHL online help content.
Numéro de référence : 077062005
Utilisateur principal
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

This programmer manual provides you with the information required to use Programmable Interface commands for remotely controlling your instrument (MSO70000/C/DX, DPO70000/B/C/D/DX, DSA70000/B/C/D, DPO7000/C, MSO5000/B, DPO5000/B).
Numéro de référence : 077001018
Programmation
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

This manual describes the installation and operation of MSO/DPO70000DX Series, MSO/DPO70000C Series, DPO7000C Series, MSO5000B Series, and DPO5000B Series instruments. Basic operations and concepts are presented in this manual.
Numéro de référence : 071298004
Utilisateur principal
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the DPO5000, DPO5000B, DPO7000C, DPO7000, DPO70000, DPO70000B, DPO70000C, DPO70000D, DPO70000DX, DSA70000, DSA70000B, DSA70000C, DSA70000D, MSO5000, MSO5000B, MSO70000, MSO70000C, and MSO70000DX Series instruments.
Numéro de référence : 077024507
Déclassification
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

This document provides user information for Tektronix MSO70000C, DSA70000C, DPO70000C, MSO5000B, DPO5000B, and DPO7000C instruments.
Numéro de référence : 077006214
Aide en ligne
016-1983-02, 016-1985-02, and 016-1988-02 and above
Rackmount Kits Instructions

This document supports installing Tektronix DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, AWG5000, and AWG7000 Series instruments in a standard 19-inch equipment rack.
Numéro de référence : 075103901
Instructions d’installation sur site
SDLA64
Serial Data Link Visualizer Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021103
Utilisateur
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Designed to support the DIGIRF V32 protocol, MPHY enables faster data transfer rates with the help of an embedded clock. M-PHY is capable of transmitting signals both in the burst mode and in the differential mode of data transfer. M-PHY works either with an independent clock embedded at the Transmitter and the Receiver or with a single clock as reference.
Numéro de référence : 077051801
Utilisateur
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Contains the methods of implementation (MIO) information for DPOJET option D-PHY, for verification, debug, characterization, compliance and interoperability testing.
Numéro de référence : 077042801
Utilisateur
10G-KR
Automated Test Solution Read This First

This document describes how to download and install the TekExpress 10G-KR Automation Solution software.
Numéro de référence : 061438801
Instructions d’installation sur site
TeKExpress USB-3.0 (USB-RMT)
Automated Receiver Compliance and Margin Test Solutions Online Help

Supports SW V2.0.X and greater. TekExpress USB-RMT provides a complete solution for USB 3.0 receiver verification, characterization, debug, and compliance testing. This document is a printable version of the application online help.
Numéro de référence : 077045803
Utilisateur
TCA-292D
Adapter Instructions

This document lists the specifications and how to use the TCA-292D Adapter.
Numéro de référence : 071299001
Utilisateur
TekExpress MHL
Test Adapter Test Fixtures Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301303
Utilisateur
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

This document specifies the reference waveform file format for the instrument.
Numéro de référence : 077022005
Programmation
TekExpress M-PHY Receiver Automated Test Solution
TekExpress M-PHY Receiver Automation Test Solution Online Help

For TekExpress M-PHY RX SW release 2.0.x and above. Printable online help for the TekExpress M-PHY Receiver Automated Test Solution application.
Numéro de référence : 077064301
Aide en ligne
TekExpress
MHL Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers. The MHL solution supports test automation in the TekExpress framework providing customers with a complete solution for MHL verification, characterization, debug, and compliance.
Numéro de référence : 077062002
Aide en ligne
TekExpress
MHL Test Adapter Test Fixture Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301302
Utilisateur
10G-KR
Automated Test Solution Read This First

This document describes how to download and install the TekExpress 10G-KR Automation Solution software.
Numéro de référence : 061438800
Instructions d’installation sur site
Option SSD
MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000/B, and MSO5000/B Solid State Drive Installation Manual

This document provides instructions on installing the optional solid state hard drive for instrument models MSO70000C, DPO7000C, DPO70000C, DSA70000C, DPO5000, and MSO5000.
Numéro de référence : 071285101
Instructions d’installation sur site
TekExpress
MHL Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers. The MHL solution supports test automation in the TekExpress framework providing customers with a complete solution for MHL verification, characterization, debug, and compliance.
Numéro de référence : 077062001
Aide en ligne
SDLA
Serial Data Link Analysis Online Help

The SDLA application helps you test your serial data link design against industry electrical standards, such as SAS and USB3. Any of four circuit blocks, Fixture, Emphasis, Channel, and Equalizer, may be included in the simulation processing.
Numéro de référence : 077021102
Utilisateur
TekExpress
MHL Test Adapter Test Fixture Read This First

This document contains information on the available MHL (Mobile High-Definition Link) test adapters and test fixture kits. These test adapters and test kits provide electrical test interfaces for MHL technology.
Numéro de référence : 071301300
Utilisateur
TekExpress M-PHY Receiver Automated Solution
TekExpress M-PHY Receiver Automation Solution Online Help Online Help

The TekExpress M-PHY application allows conformance testing to the latest MIPI M-PHY Conformance Test Suite.
Numéro de référence : 077064300
Aide en ligne
TCA-292D
Adapter Instructions

This document lists the specifications and how to use the TCA-292D Adapter.
Numéro de référence : 071299000
Utilisateur
Read This First - SFP, Test Fixture
Information on SFP+ Test Fixtures Read This First

This document contains a table describing the versions of the SFP+ Test Fixtures.
Numéro de référence : 071301400
Utilisateur
TekExpress
DisplayPort Automated Solutions Online Help

TekExpress is the Tektronix Compliance Test Automation Framework, developed to support current and future test automation needs of customers.
Numéro de référence : 077062100
Aide en ligne
Thunderbolt
Test Fixture Read This First

This document contains information on the Thunderbolt Plug and Receptacle Test Adapters.
Numéro de référence : 071296800
Utilisateur
Logic Probe Deskew Fixture
P/N 067-2298-00 Instructions

This document provides instructions for using a deskew fixture to time-align trigger signals from logic probes.
Numéro de référence : 071285000
Utilisateur
P6750
Logic Probe Instructions

This document provides user information for the P6750 Logic Probe.
Numéro de référence : 071284900
Utilisateur
MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, and DPO5000 Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document contains the specifications and performance verification for the instrument.
Numéro de référence : 077006305
Vérification des performances
MIPI M-MPHY
Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test Other

Designed to support the DIGIRF V32 protocol, MPHY enables faster data transfer rates with the help of an embedded clock. M PHY is capable of transmitting signals both in the burst mode and in the differential mode of data transfer. M PHY works either with an independent clock embedded at the Transmitter and the Receiver or with a single clock as reference.
Numéro de référence : 077051800
Utilisateur
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7, Win10, V10.5.0
The Tektronix Option PCE3 (Gen1/2/3/4) and Option PCE5 (Gen5) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152812
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.5.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155514
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-112G-VSR , OIF-CEI-56G-MR, OIF-CEI-56G-LR, IEEE-AUI4, IEEE-CR4 and IEEE-KR4 Conformance and Characterization Solution for Real Time Oscilloscopes - v10.1.0
400G-TXE offers streamlined and fully automated transmitter characterization OIF (VSR, LR and MR) and IEEE(802.3bs Draft 3.5 and 802.3cd Draft 3.5) PAM4 standards. It extends PAM4 software package for in-depth analysis and debug of fully automated …

Numéro de référence : 066209000
Application
TekExpress M-PHY TX Automated Solution - v10.1.0
TekExpress M-PHY Tx is an automated test system for testing the M-PHY compliance-conformance of HS, PWM and SYS signals.Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest M-PHY Spec v4.1. It …

Numéro de référence : 066208400
Application
HDMI 2.1 FRL TX/RX
The TekExpress FRL compliance application gives you the tools to easily run the High Definition Multimedia Interface (HDMI) tests under the HDMI compliance test specification 2.1. With this application you can run 9 Source and 5 Sink measurement …

Numéro de référence : 066202401
Application
TekExpress USB3.2 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.7
The TekExpress USB3.2 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.2 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155421
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186017
Application
TekExpress HDM - MSO/DSA/DPO70000C, D, DX, SX - V10.1.1
The Tektronix TekExpress HDM is an automated test solution for testing the HDMI compliance for Physical Layer Solution of HDMI DUTs as per CTS 2.0. Software also supports HDM1.4 Sink testing. This release also supports updated HF1-2 and HF1-7 …

Numéro de référence : 066206800
Application
TDSHT3 - DPO-MSO70000C-D-DX -SX - Win10 - V5.3.6
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. The TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066206200
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164515
Application
DDRA - DDR Analysis (DPO/DSA/MSO, 5K/7K/70K B/C/D/DX/SX Series) - Win10 - V10.2.0
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are required …

Numéro de référence : 066189005
Application
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066196756
Application
Tektronix TekExpress LVDS Automated test solution on 70KC Series Scopes - V10.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization for 70KC Series Scopes.

Numéro de référence : 066170912
Application
TekExpress SATA - DPO-DSA-MSO70000 - C, D, DX, SX - Win7 Win10 - V10.3.2
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows7 / Windows10 system software. DPOJET (option DJA) must be …

Numéro de référence : 066178307
Application
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093812
Pilote
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-C, D, DX, SX - Win7-Win10 - V10.3.5
The Tektronix DisplayPort Transmitter (DPTx) is an automated compliance and debug test system for testing DisplayPort (DP) Source devices of standard and Type C connectors that support Spec version DP1.2b and CTS 1.4 DPTx options - TekExpress DPTx …

Numéro de référence : 066161210
Application
TekExpress USB3.2 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.6
The TekExpress USB3.2 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.2 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155420
Application
PAM4 Analysis DPO70000DX DPO70000SX Win10 - V10.7.0
The following new major features are added into this release:? New measurements: EOJ-per-transition, sigm_n-per-PAM-level (Electrical) RINxOMA, OMA-TDECQ, Ceq (Optical)? Scope noise compensation for selected measurements, such as EH5/6, SNDR, Jrms …

Numéro de référence : 066181407
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.6.1
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling and loss caused by fixtures, cables and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded with …

Numéro de référence : 066134214
Application
TekExpress DPHY TX on DPO-MSO 5K/7K/70KC/DX - V11.1.0
TekExpress D-PHY Tx software provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.2 and the D-PHY conformance test specification v1.2 …

Numéro de référence : 066170811
Application
HDMI2.1-eARC _v10.0.0
The Tektronix TekExpress eARC is an automated test solution for testing Enhance Audio Return Channel for 13 electrical Transmitter and 10 electrical Receiver measurements.

Numéro de référence : 066202300
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179007
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.5
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155419
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.5.8
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134213
Application
Performance DPO Firmware (Win7 Only) for DPO70000SX, MSO/DPO70000DX, DSA/DPO70000D and MSO/DSA/DPO70000C
This is the latest firmware for the following products: DPO70404C, DPO70604C, DPO70804C,DPO71254C, DPO71604C, DPO72004C,DPO72504D, DPO73304D, DPO72304DX, DPO72504DX, DPO73304DX,DSA70404C, DSA70604C, DSA70804C,DSA71254C, DSA71604C, DSA72004C,DSA72504D …

Numéro de référence : 066170724
Firmware
Deployment Package (Win10 Only) for DPO/DSA70000D, DPO/MSO70000DX, DPO70000SX - V10.10.1.10
Deployment Package for DPO70000D, DSA70000D, DPO70000DX, MSO70000DX and DPO70000SX. It contains the TekScope Firmware and compatible application software.This firmware version is ONLY for scopes running Microsoft Windows 10 (64-bit).This software is …

Numéro de référence : 066141838
Firmware
eDP - MSO/DSA/DPO 70000 C/D/DX/SX - Win7, Win10 - V10.1.0
Tektronix eDP DPOJET Essential Option provides engineers an easy and fast way to debug and perform compliance testing for eDP Tx devices.

Numéro de référence : 066150007
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software …

Numéro de référence : 066186016
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C, D, DX, SX - Win 7, Win10 - V10.4.5
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities.TekExpress Automation software can …

Numéro de référence : 066155511
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7, Win10, V10.4.3
The Tektronix Option PCE3 (Gen1/2/3) and Option PCE4 (Gen4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG? specifications …

Numéro de référence : 066152811
Application
eDP1.4 - MSO/DSA/DPO 70000 C/D/DX/SX - Win7, Win10 - V10.0.1
The Tektronix eDP1.4 (Embedded DisplayPort) DPOJET Essentials Option provides engineers with an easy, fast and efficient way to debug and perform compliance testing for eDP1.4 Tx devices.

Numéro de référence : 066150012
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance …

Numéro de référence : 066186015
Application
TekExpress SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX-SX - V10.2.2
The Tektronix SFP-TX is an automated compliance and debugs test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution.SFP-TX:- TekExpress SFP+ QSFP+ Tx, Automated compliance solution- SFP+ QSFP+ Tx, a DPOJET Plug-in, a debug solutionSFP …

Numéro de référence : 066189103
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7, Win 10 - V3.0.4.3
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134212
Application
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Windows 7 & Windows 10 - V1.0.2.4
Cable and fixture characterization and De-embed software.Quick characterization of the insertion loss and phase response of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and creation of de-embed filters based …

Numéro de référence : 066184203
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win7 and win10 - V10.6.0
The following new major features are added into this release:• Improved TDECQ measurement methodology to align with the latest IEEE specifications• Addition of TDECQ FFE tap auto-set and user-input capability

Numéro de référence : 066181406
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V10.2.5 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.- TekExpress 100G-TXE Automated compliance solution- CR4, KR4 and CAUI-4 DPOJET Plug-in …

Numéro de référence : 066187706
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v10.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

Numéro de référence : 066196601
Application
Deployment Package (Win10 Only) for DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/MSO70000DX, DPO70000SX - V10.9.1
Deployment Package for DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX and DPO70000SX. It contains the TekScope Firmware and compatible application software.This firmware version is ONLY for scopes running Microsoft …

Numéro de référence : 066141834
Firmware
Performance DPO Firmware for DPO70000SX, MSO/DPO70000DX, DSA/DPO70000D and MSO/DSA/DPO70000C - V10.8.7.25
This is the latest firmware for the following products: DPO70404C, DPO70604C, DPO70804C,DPO71254C, DPO71604C, DPO72004C,DPO72504D, DPO73304D, DPO72304DX, DPO72504DX, DPO73304DX,DSA70404C, DSA70604C, DSA70804C,DSA71254C, DSA71604C, DSA72004C,DSA72504D …

Numéro de référence : 066170717
Firmware
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.3
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool that integrates the DPOJET Options USB3 Essentials and …

Numéro de référence : 066155418
Application
TekExpress 10G-KR Compliance, Debug and Protocol Decode Solution - V10.2.0
The Tektronix 10G-KR is an automated compliance and Debug test system for testing 10G-KR and 40G-KR4 along with Protocol Decode Solution.10G-KR option supports:- TekExpress 10G-KR, Automated compliance test for 10G-KR device and 40G-KR4 device, and a …

Numéro de référence : 066197600
Application
TekExpress D-PHY TX Automated Solution Win7/Win10 - V10.0.2
TekExpress software with Option D-PHY TX provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.0 & v1.1 & v1.2 and the D-PHY …

Numéro de référence : 066189801
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-112G-VSR , OIF-CEI-56G-MR, OIF-CEI-56G-LR, IEEE-AUI4, IEEE-CR4 and IEEE-KR4 Conformance and Characterization Solution for Real Time Oscilloscopes - v10.0.1.125
400G-TXE offers streamlined and fully automated transmitter characterization OIF (VSR, LR and MR) and IEEE(802.3bs Draft 3.5 and 802.3cd Draft 3.0) PAM4 standards. It extends PAM4 software package for in-depth analysis and debug of fully automated …

Numéro de référence : 066192502
Application
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance …

Numéro de référence : 066186008
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self …

Numéro de référence : 066141832
Firmware
TekExpress SAS-3 Transmitter Solution - DPO-DSA-MSO70000-C,D,DX,SX - Win 7 Win10 - V10.2.5
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156306
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164512
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179006
Application
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:
The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software automates …

Numéro de référence : 066166806
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - V10.0.1
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066187401
Application
10G-KR Compliance and Debug Solution-DPOJET - DPO-DSA-MSO70000-C,D,DX,SX , V10.1.2
Tektronix 10G-KR Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for 10G-KR devices.DPOJET setup files for N1N0, PRBS11 and PRBS31 patterns are provided with the 10G-KR which help set scope …

Numéro de référence : 066188302
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.2
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution.40G-CR4:- TekExpress 40GBase-CR4 Automated compliance solution- 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188602
Application
TekExpress 400G-TXE - Supports OIF-CEI-56G-VSR, OIF-CEI-56G-MR & OIF-CEI-56G-LR Conformance and Characterization Solution for Real Time Oscilloscopes - v1.0.1
400G-TXE offers streamlined and fully automated transmitter characterization of OIF-CEI-56G-VSR, OIF-CEI-56G-MR, and OIF-CEI-56G-LR electrical transmitter specifications. It extends PAM4 software package for in-depth analysis and debug of fully …

Numéro de référence : 066192501
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.2.3 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.- TekExpress 100G-TXE Automated compliance solution- CR4, KR4 and CAUI-4 DPOJET Plug-in …

Numéro de référence : 066187704
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v1.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and …

Numéro de référence : 066196600
Application
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with …

Numéro de référence : 066180101
Application
PAM4 Analysis - DPO70000DX - DPO70000SX – Win 7 - Win 10 - v10.5.0
The following new major features are added into this release• • Addition of the IEEE measurements J4, Jrms, EOJ, Transition time, SNR_ISI• Addition of the TDECQ measurement• Full public support of optical measurements, enabled by a separate option …

Numéro de référence : 066181405
Application
DPOJET SAS Tx Compliance Test Application DPO-DSA-MSO 70000C,D,DX,SX - Win7 Win10 - v10.2.1
The new DPOJET SAS solution provides measurements for SAS 22.5Gbps, 12Gbps, 6Gbps, 3Gbps and 1.5Gbps and OOB Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet …

Numéro de référence : 066156409
Application
eDP - MSO/DSA/DPO 70000 C/D/DX/SX - Win7 - V10.0.0
The Tektronix eDP DPOJET Essential Option provides engineers an easy and fast way to debug and perform compliance testing for eDP Tx devices.

Numéro de référence : 066150006
Application
TekExpress M-PHY TX Automated Solution - V10.0.3
The Tektronix TekExpress M-PHY Tx Automated Solution option provides Design and Validation Engineers with an Easy and Fast Way to Debug and perform Compliance Testing for MPHY devices

Numéro de référence : 066188102
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000C, D, DX, SX - Win7, Win10 - V10.3.2
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options ‚USB3 Essentials‚ …

Numéro de référence : 066155417
Application
TekExpress HDM - MSO/DSA/DPO70000C, D, DX, SX - V10.1.0
HDMI 2.0 Advanced Analysis and Compliance Software for Real Time Oscilloscope .

Numéro de référence : 066176309
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164511
Application
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX) - V10.8.1
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.

This software …

Numéro de référence : 066141829
Firmware
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug …

Numéro de référence : 066170109
Application
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

Numéro de référence : 066151905
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement …

Numéro de référence : 066142807
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.2.2 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.
- TekExpress 100G-TXE Automated compliance solution
- CR4, KR4 and CAUI-4 DPOJET …

Numéro de référence : 066187703
Application
TekExpress C-PHY Tx Essentials Debug Solution - V10.0.2
The Tektronix C-PHY Tx Essentials Option provides Design and Validation Engineers an easy and fast way to debug and perform Compliance Testing for CPHY devices.

This software applies to Tekscope 10.3.0 or above and DPOJET 10.0.0 or above.

Numéro de référence : 066188001
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.3.0
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155415
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.1
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4: - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188601
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - SX Win7 - V10.0.2
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163807
Application
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164510
Application
DisplayPort DP-AUX software - V1.1.0
DP-AUX software for controlling DisplayPort 1.2 DUT's when connected using Tektronix DP AUX controller.

Numéro de référence : 066161211
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.4.0
The following new features are added into this release: -Support for OIF-CEI electrical compliance (UUGJ, UBHPJ, Even-Odd jitter -Support higher-order CTLE, horizontal mask metrics, etc) -Automatic symbol-rate detection -Improved FFE and DFE …

Numéro de référence : 066181404
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX, Win 7 - V3.0.2
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior. Simulation circuits can be embedded …

Numéro de référence : 066134211
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.2.1
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152806
Application
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

Numéro de référence : 066169913
Application
SFP QSFP Compliance and Debug Solution-DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - Win7 - V10.1.1
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066191200
Application
TDSHT3 - DPO-MSO70000C-D-DX -SX - Win7 - V5.3.6
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. The TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066156005
Application
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179005
Application
TekExpress SAS-3 Transmitter Solution - DPO-DSA-MSO70000-C,D,DX,SX - Win 7 - V10.2.2
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156304
Application
USB 3.0 Essentials - DPS-DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.2
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices. USB 3.0 options install: -'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169507
Application
Tektronix USB SSP Analysis Tool - DPS-DPO-DSA-MSO-70000-C, D, DX, SX - Win7 - v10.2.1
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156609
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C,D,DX,SX - Win7 - v10.1.1
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156406
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX,SX - Win7 - V10.2.3
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178303
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.1
The Tektronix DPHY Analysis solution, Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066190900
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.1
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155413
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142805
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.1.1
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152805
Application
TekExpress HEAC - DPO7000-C-DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V1.3.8
HDMI Ethernet Audio Back Channel (HEAC) which is part of HDMI 1.4a/b specifications enables networking of HDMI devices, speeds up signaling between Transmitter and Receiver devices and also provides a faster path for the audio return channel …

Numéro de référence : 066116808
Application
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are …

Numéro de référence : 066189001
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug Solution - V1.1.0 - DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE. - TekExpress 100G-TXE Automated compliance solution - CR4, KR4 and CAUI-4 DPOJET Plug …

Numéro de référence : 066187701
Application
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO7000C or DPO77002SX) - V10.5.1
Deployment Package for DPO5000/B, MSO5000/B, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.This …

Numéro de référence : 066141820
Firmware
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093811
Pilote
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164509
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.3.0
The following new features are added into this release: • Feed-Forward Equalization (FFE) • Error detection and navigation, BER and SER monitoring • SNDR Measurement and associated plots

Numéro de référence : 066181402
Application
TekExpress USB3.1 Tx - DPO-DSA-MSO-70000-C,D,DX,SX - Win7 - V10.2.1
The TekExpress USB3.1 Tx application (Opt. USB-TX and USBSSP-Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options 'USB3 Essentials' …

Numéro de référence : 066155412
Application
SFP QSFP Compliance and Debug Solution-DPOJET- DPO-DSA-MSO70000-C, D, DX, SX - Win7 - V10.1.0
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066189700
Application
TekExpress SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX-SX - V10.1.0
The Tektronix SFP-TX is an automated compliance and debug test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution. SFP-TX : - TekExpress SFP+ QSFP+ Tx, Automated compliance solution - SFP+ QSFP+ Tx , a DPOJET Plug-in, a debug …

Numéro de référence : 066189100
Application
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Win 7 - V1.0.2
Cable and fixture characterization and De-embed software. Quick characterization of the insertion loss (crosstalk) of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and perform de-embed filter design using …

Numéro de référence : 066184202
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - SX Win7 - V10.0.1
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163806
Application
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170708
Firmware
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179002
Application
TekExpress USB RMT - DPO-DSA-MSO70000-C,D,DX - Win7 - V2.0.8
The USB-RMT Automated Test Software is a Windows based application that runs on any Tektronix Windows7 based instruments such as DPO/DSA/MSO70000 C/D/DX Series oscilloscopes. TekExpress software (TEKEXP) ordered with option USB-RMT provides an …

Numéro de référence : 066120912
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152505
Application
TekExpress D-PHY TX Automated Solution Win7, V10.0.0
Tektronix TekExpress Automated Test Software is a Windows-based application that runs on Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides unmatched automation for each …

Numéro de référence : 066188900
Application
PAM4 Analysis – DPO70000DX – DPO70000SX – win 7 - V10.0.0
The following new features are added into this release: -Noise Analysis and Population Control -Interactive plots -Full PI Command Support -Continuous Run -Measurement logging to .csv

Numéro de référence : 066181401
Application
TekExpress 40GBase-CR4 Compliance and Debug Solution - DPO-DSA-MSO70000C-D-DX-SX - V10.0.0.45
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4: - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution

Numéro de référence : 066188600
Application
10G-KR Compliance and Debug Solution-DPOJET - DPO-DSA-MSO70000-C,D,DX,SX - Win7, V10.0.0
Tektronix 10G-KR Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for 10G-KR devices.DPOJET setup files for N1N0, PRBS11 and PRBS31 patterns are provided with the 10G-KR which help set scope …

Numéro de référence : 066188300
Application
40GBase-CR4 Debug and Compliance Solution - DPOJET - DPO-DSA-MSO70000-C,D,DX,SX - Win7, V10.0.0.44
40GBase-CR4 Debug and Automated Compliance Solution application (Option 40G-CR4) provides design engineers with an easy-to-use automated solution to test and debug 40GBASE-CR4 designs, using off-the-shelf tools, to reduce human-related measurement …

Numéro de référence : 066188400
Application
TekExpress C-PHY Tx Essentials Debug Solution - V10.0.0
The Tektronix C-PHY Tx Essentials Option provides Design and Validation Engineers an easy and fast way to debug and perform Compliance Testing for CPHY devices. This software applies to Tekscope 10.3.0 or above and DPOJET 10.0.0 or above.

Numéro de référence : 066188000
Application
TekExpress 100G-TXE support for IEEE-802.3bm: CAUI4 and IEEE-802.3bj: KR4/CR4 100Gbps Transmitter Compliance and Debug solution V1.0.0 DPO-MSO70000-DX-SX
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE. - TekExpress 100G-TXE Automated compliance solution - CR4, KR4 and CAUI-4 DPOJET Plug …

Numéro de référence : 066187700
Application
Tektronix USB SSP Analysis Tool - DPO-DSA-MSO70000-C, D, DX - Win7 - V10.1.0
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156606
Application
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to …

Numéro de référence : 066152504
Application
USB 3.0 Essentials - DPO-DSA-MSO 70000C, D,DX - Win7 - v10.1.0
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices.USB 3.0 options install:-'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169505
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX,SX - Win7 - V10.2.0
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX/SX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178302
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.0
The Tektronix DPHY Analysis solution,Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066184601
Application
Tektronix MIPI M-PHY Analysis Solution - Win7 - V10.0.0
The Tektronix M-PHY Analysis Solution Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices.

Numéro de référence : 066179801
Application
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7, v10.1.0
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155410
Application
TekExpress PCI Express Compliance solution - DPS-DPO-DSA-MSO70000-C,D,DX,SX - Win 7 V10.1.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155504
Application
Tektronix DPOJET PCI Express Analysis Tool - DPS-DPO-DSA-MSO70000 - Win7 - v10.1.0
The Tektronix Option PCE3 (Gen 1/2/3) and Option PCE4 (Gen 1/2/3/4) applications provide the most comprehensive solution for PCI Express Transmitter compliance testing as well as debug and validation of PCI Express devices against the PCI-SIG® …

Numéro de référence : 066152804
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C, D, DX, SX - Win7 v10.1.0
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156405
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX,SX - Win7 V10.0.0
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066187400
Application
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066170705
Firmware
SignalCorrect - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX Win 7, V1.0.1
Cable and fixture characterization and De-embed software. Quick characterization of the insertion loss (crosstalk) of cables, fixtures and other interconnects using Tektronix Calibration Source (TCS70902) and perform de-embed filter design using …

Numéro de référence : 066184201
Application
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA …

Numéro de référence : 066141813
Firmware
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The …

Numéro de référence : 066186000
Application
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T & 10GBASE-T) - v1.0.0
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE802.3bz, section 126, and the NBASE-T specification. This allows you to quickly and efficiently test …

Numéro de référence : 066185200
Application
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066126309
Application
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set …

Numéro de référence : 066169801
Application
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7, V6.2.0
The Tektronix DPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066184600
Application
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal …

Numéro de référence : 066140005
Application
Tektronix DPOJET PCI Express Analysis Tool - DPO-DSA-MSO70000 - Win7 - v6.3.0
The PCE3 application is compatible with Tektronix DPO/DSA/MSO70000 series oscilloscopes that are designed to meet the challenges of the next generation of serial data standards such as PCI Express. The Tektronix PCI Express Compliance Module and PCIe …

Numéro de référence : 066152803
Application
SAS3 Tx Compliance Test Application DPO-DSA-MSO 70000C, D, DX - Win7, V6.1.1
The new SAS3 solution provides measurements for SAS 12 Gb/s, 6 Gb/s, 3 Gb/s and 1.5 Gb/s Tx testing. Simple and easy-to-use measurement setups help perform all measurements with a simplified interface. Automation options help meet compliance needs …

Numéro de référence : 066156404
Application
TekExpress MHL - DPO-DSA-MSO70000-C-D-DX - Win7 v7.0.0
Option MHD3 Tektronix TekExpress (TEKEXP) MHL - Advanced Analysis and Compliance Software provides unmatched automation for MHL 3.3 Transmitter and Receiver tests as per Compliance Test Specification v3.3 and Option MHD for MHL Transmitter, Receiver …

Numéro de référence : 066163804
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164504
Application
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as the …

Numéro de référence : 066172104
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.3
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066184000
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and …

Numéro de référence : 066142803
Application
40GBase-CR4 Debug and Compliance Solution - DPOJET - DPO-DSA-MSO70000-C,D,DX - Win7 V1.0.1
40GBase-CR4 Debug and Automated Compliance Solution application (Option 40G-CR4) provides design engineers with an easy-to-use automated solution to test and debug 40GBASE-CR4 designs, using off-the-shelf tools, to reduce human-related measurement …

Numéro de référence : 066170501
Application
REPORT GENERATOR V3.3.3 - DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports. The Report Generator automates the …

Numéro de référence : 066183700
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, Win 7, V2.3.1
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior. Simulation circuits can be embedded …

Numéro de référence : 066134209
Application
PAM4 Analysis - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V1.0.2
- The PAM4 Analysis application runs on the following oscilloscopes. DPO/MSO73304DX DPO73304SX DPO77002SX DPS73308SX DPS77004SX - To operate this application, your scope will require the DPOJET Jitter + Noise application (DJAN) and its option key. In …

Numéro de référence : 066181400
Application
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.6
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155409
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX - Win7 - V1.0.5
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178301
Application
TekExpress D-PHY TX Automated Solution Win7, V3.3.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on Windows7 computer operating system, including Tektronix Windows-based instruments. TekExpress software with Option D-PHYTX provides unmatched …

Numéro de référence : 066180200
Application
TekExpress 4.0 M-PHY TX Automated Solution - v6.2.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest …

Numéro de référence : 066179700
Application
Tektronix MIPI M-PHY Analysis Solution - Win7 v6.2.0
The Tektronix MPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices. MPHY option installs: - MPHY Essentials DPOJET Plug-in

Numéro de référence : 066179800
Application
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class …

Numéro de référence : 066045315
Pilote
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164503
Application
Serial Data Link Analysis Visualizer - MSO-DPO-DSA70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO70000SX Win 7, V2.3.0
SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, cables, and probes allowing visibility of the true circuit behavior.Simulation circuits can be embedded …

Numéro de référence : 066134208
Application
TekExpress SATA - DPO-DSA-MSO70000 - C,D,DX - Win7 - V1.0.1
TekExpress SATA provides TSG and RSG-RMT Compliance and Characterization measurements for Serial ATA Device and Host. This solution operates on DPO/DSA/MSO70000C/D/DX running Windows 7 system software. DPOJET (option DJA) must be installed.

Numéro de référence : 066178300
Application
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option …

Numéro de référence : 066164502
Application
TDSDVI - DPO-DSA-MSO5K-7K-70K-B-C-D-DX - WinXp, Win7, Version 3.0.11
DVI developers require a reliable and easy-to-use test tool to perform in-house compliance testing. The DVI Compliance Test Solution enables faster validation cycles with automatic pass-fail testing over a comprehensive range of tests for …

Numéro de référence : 066134302
Application
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform …

Numéro de référence : 066177100
Application
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled …

Numéro de référence : 066177200
Application
TekExpress C-PHY Tx Essentials Debug Solution v1.0.0 - DPO-DSA-MSO70000C-D-DX - win7
The Tektronix TekExpress C-PHY Tx Essentials is an debug solution for testing the C-PHY product for MIPI DUT KeyFeature: Measure the rise time and fall time of the DUT C-PHY signals. Performs both eye height and eye height measurements, and also …

Numéro de référence : 066175700
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155503
Application
TekExpress M-PHY RX Automated Solution DPO-DSA-MSO70000--C -D-DX - Win7, V3.1.0
Tektronix TekExpress Automated Receiver M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYRX provides Simple 2-Instrument Setup based on Scope-integrated Error Detector, for single …

Numéro de référence : 066135205
Application
TekExpress ThunderBolt-Tx Compliance Solution - DPO-DSA-MSO70000-C,D,DX Win 7, V1.0.4
The TBT-TX Opt. (TekExpress® TBT Transmitter Automated Solution option), supported on DPO/DSA/MSO70000/C/D/DX models, includes TekExpress Automated Software (TekExpress Thunderbolt Tx) for testing Thunderbolt Physical Layer Transmitter. TekExpress …

Numéro de référence : 066175600
Application
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-C,D, DX - Win7, V1.2.2
The Tektronix DisplayPort Transmitter (DPTx) is an automated compliance and debug test system for testing DisplayPort (DP) Source devices that support Spec version DP1.2b DPTx options - TekExpress DPTx, Automated compliance test. DPTx provides …

Numéro de référence : 066161202
Application
TekExpress USB RMT - DPO-DSA-MSO70000-C,D,DX - Win7, v2.0.5
The USB-RMT Automated Test Software is a Windows based application that runs on any Tektronix Windows7 based instruments such as DPO/DSA/MSO70000 C/D/DX Series oscilloscopes. TekExpress software (TEKEXP) ordered with option USB-RMT provides an …

Numéro de référence : 066120911
Application
Tektronix FibreChannel-16G Analysis Tool -DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.1
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066151802
Application
TekExpress XGbT - 10GBASE-T Automation Solution for DPO-DSA-MSO -70000-C-D-DX Win7, V2.1.4
10GBASE-T compliance solution to address PHY layer compliance needs of 802.3-an-2006 standard. Provides an automated solution for performing Clock Frequency, Droop, Jitter-Master, and Jitter-Slave measurements in compliance with IEEE 802.3ae-2006 …

Numéro de référence : 066125706
Application
SFP QSFP Complaince and Debug Solution-DPOJET- DPO-DSA-MSO70000-C,D,DX - Win7 V6.1.4
Tektronix SFP QSFP debug solution Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for SFP+ QSFP+ devices.

Numéro de référence : 066170600
Application
TekExpress SAS-3 Transmitter Solution - MSO-DPO-DSA70000C-D oscilloscopes - Win7, V1.0.3
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per the SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is …

Numéro de référence : 066156302
Application
Tektronix USB SSP Analysis Tool - DPO-DSA-MSO70000-C, D, DX - Win7, V1.1.3
The Tektronix USB SSP Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.1 10 Gb/s devices.

Numéro de référence : 066156603
Application
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US …

Numéro de référence : 066142801
Application
Tektronix MIPI D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7, V6.0.1
The Tektronix DPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066169700
Application
USB 3.0 Essentials - DPO-DSA-MSO 70000C, D,DX - Win7 v6.2.2
The Tektronix USB 3.0 Essentials Options provide Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for USB 3.0 devices. USB 3.0 options install: -'USB 3.0 Essentials' DPOJET Plug-in

Numéro de référence : 066169500
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.2.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155502
Application
Tektronix MIPI M-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 v6.1.0
The Tektronix MPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices. MPHY option installs: - MPHY Essentials DPOJET Plug-in

Numéro de référence : 066169400
Application
TDSHT3 - DPO-DSA-MSO70000-B-C-D-DX - Win XP - Win7, V5.2.9
TDSHT3: Tektronix solution for HDMI 1.4a/b Compliance testing, enables unprecedented efficiency by offering a complete solution for reliability and automation to support the widest range of tests. TDSHT3 embeds the HDMI 1.4a/b compliance test …

Numéro de référence : 066156001
Application
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

Numéro de référence : 066133202
Utilitaires
TekExpress DisplayPort-Tx - DPO-DSA-MSO70000-B,C,D, DX - Win XP, Win7,V1.2.1
The Tektronix DPTx is an automated compliance and debug test system for testing the DP Source devices of DP1.2b Version.DPTx options - TekExpress DPTx, Automated compliance test.DPTX provides 10 free trials by default and need license key to enable …

Numéro de référence : 066161201
Application
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

Numéro de référence : 066093809
Pilote
USB3-TX - DPO-DSA-MSO70000-C,D,DX - Win7 V6.0.2
The TekExpress USB3 Tx application (Opt. USB-TX and USBSSP Tx) is the automated solution for verification, characterization and debug of USB3.1 measurements from DPOJET Timing and Analysis tool, that integrates the DPOJET Options "USB3 Essentials" …

Numéro de référence : 066155406
Application
SSIC Protocol Decoder Solutions Win 7 DPO-DSA-MSO70000--C-D-DX v1.0.0
Super Speed Inter-Chip (SSIC) is an optimized inter-chip version of USB3.0.The PHY layer will be MIPI MPHY and the protocol layer will be super speed USB 3.0. SSIC supports USB 3.0 speeds upto 5 Gbps. The M-PHY standard consumes lower power and …

Numéro de référence : 066164100
Application
40GBase-CR4 Compliance and Debug solution - DPO-MSO70000C-D-DX - Win 7 V1.0.0
The Tektronix 40G-CR4 is a Compliance and Debug test solution for testing the 40GBase-CR4 Solution. 40G-CR4 - TekExpress 40GBase-CR4 Automated compliance solution - 40GBase-CR4, a DPOJET Plug-in, a debug solution 40G-CR4 provides 10 free trials by …

Numéro de référence : 1000000631
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.1
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155501
Application
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well …

Numéro de référence : 066142101
Application
SFP-TX - SFP QSFP Tx Compliance and Debug solution - DPO-DSA-MSO70000C-D-DX - Win 7 V3.1.0
The Tektronix SFP-TX is an automated compliance and debug test system for testing the SFP+ (SFF-8431) QSFP+ (SFF-8635) Tx Solution. SFP-TX - TekExpress SFP+ QSFP+ Tx, Automated compliance solution - SFP+ QSFP+ Tx , a DPOJET Plug-in, a debug …

Numéro de référence : 066161100
Application
TekExpress M-PHY TX Automated Solution DPO-DSA-MSO70000-B-C-D-DX Win XP - Win7, V2.1.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest …

Numéro de référence : 066139902
Application
TekExpress SAS-3 Transmitter Solution - MSO-DPO-DSA70000C-D oscilloscopes - Win7, V1.0.0
Tektronix TekExpress SAS software application for Real Time Oscilloscopes provides fast and accurate validation of SAS hosts and devices per SAS-3 specification. TekExpress SAS software is the new generation of TekExpress automation and is offered …

Numéro de référence : 066156300
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-C,D,DX - Win 7 V2.0.0.107
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066155500
Application
Deployment Package for DPO7KC, DPO-DSA-MSO70KC and DPO-DSA70KD Win7 series oscilloscopes V6.8.1
This software is a self-extracting executable consisting of the main oscilloscope software version 6.8.1 and the following optional applications: 1. 10G-KR Compliance, Debug, and Decode Solution, Version 6.0.1.103 2. DDRA Memory Interface …

Numéro de référence : 066141804
Firmware
TekExpress M-PHY RX Automated Solution DPO-DSA-MSO70000-B-C - Win XP - Win7, V2.1.0
Tektronix TekExpress Automated Receiver M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments.Option M-PHYRX provides Simple 2-Instrument Setup based on Scope-integrated Error Detector, for single-button …

Numéro de référence : 066135202
Application
TekExpress D-PHY TX Automated Solution DPO7000-C, DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V3.1.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on any Windows XP or Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides …

Numéro de référence : 066152200
Application
Tektronix DPOJET PCI Express Analysis Tool - DPO-DSA-MSO70000 - Win7 v6.0.1
The PCE3 application is compatible with Tektronix DPO/DSA/MSO70000 series oscilloscopes that are designed to meet the challenges of the next generation of serial data standards such as PCI Express. The Tektronix PCI Express Compliance Module and …

Numéro de référence : 066152800
Application
DSS Deskew
DSS Deskew will be used by customers who have connected two DPO/DSA70000D scopes using the DPOACQSYNC kit. The application will automatically deskew the channels of the two scopes, so that their acquisition paths are aligned prior to connecting to …

Numéro de référence : 066151700
Application
Tektronix FibreChannel-16G Analysis Tool - DPO-DSA-MSO70000-C,D - Win7 V6.0.0
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American …

Numéro de référence : 066151800
Application
10G-KR Compliance and Debug solution for DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The Tektronix 10G-KR is an automated compliance and Debug test system for testing 10G-KR and 40G-KR4 10G-KR option supports: - TekExpress 10G-KR, Automated compliance test for 10G-KR device and 40G-KR4 device, and a DPOJET Plug-in debug …

Numéro de référence : 066143301
Application
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key: …

Numéro de référence : 066145300
Application
TekExpress PCI Express Compliance solution - DPO-DSA-MSO70000-B,C,D - Win XP and Win 7 V1.0.0
The TekExpress Automation for PCI Express Transmitter Compliance greatly reduces the effort and accelerates the compliance testing for PCI Express systems and devices with several unique and innovative capabilities. TekExpress Automation software …

Numéro de référence : 066146200
Application
Firmware - DPO7000, DPO-DSA70000, DPO-DSA70000B-C, MSO70000-C- With Doc, Win XP V5.3.5
This is the latest Windows XP firmware (released November 2012) for the DPO7054, DPO7104, DPO7254, DPO7354, DPO/DSA70404, DPO/DSA70604, DPO/DSA70804, DPO/DSA71254, DPO/DSA71604, DPO/DSA72004, DPO/DSA70404B, DPO/DSA70604B, DPO/DSA70804B …

Numéro de référence : 066079844
Firmware
TekExpress M-PHY TX Automated Solution DPO-DSA-MSO70000-B-C-D Win XP - Win7 V2.0.0
Tektronix TekExpress Automated Transmitter M-PHY Test Software is a Windows-based application that runs on Tektronix Windows-based instruments. Option M-PHYTX provides single-button automation setup for transmitter conformance testing to the latest M …

Numéro de référence : 066139901
Application
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the …

Numéro de référence : 066077407
Application
TDSPTD - DPO7254-C, DPO7354-C, DPO-DSA-MSO70000-B-C - Win XP - Win 7
The Protocol Trigger and Decode (PTD) application enables you to decode and simultaneously display protocol-level information and physical layer signaling. The PTD application includes the following features:- Simultaneously view signal, characters …

Numéro de référence : 066063709
Application
SIGNALVU - Vector Signal Analysis Software V2.3.0173
SignalVu Vector Signal Analysis runs as an option to the MSO70000, DPO/DSA70000, DPO/DSA70000B, DPO7000, and DPO/DSA/MSO70000C (32-bit systems) series scopes. SignalVu brings the signal analysis tools of the Tektronix RSA6100A Real-Time Spectrum …

Numéro de référence : 066107808
Application
Automated Low Voltage Differential Signaling (LVDS) Measurements
Low Voltage Differential Signaling (LVDS) is a popular signaling system for applications requiring high speed data transfers using low power. This application note explains the basic elements of LVDS signaling, details measurements based on an …

Numéro du document : 48W-61639-0
Note d’application
Analyzing 8b/10b Encoded Signals with a Real-time Oscilloscope
This application note discusses troubleshooting and verifying devices with 8b/10b serial buses using the Tektronix MSO/DPO/DSA70000 Series oscilloscopes with their powerful real time triggering of 8b/10b serial buses.

Numéro du document : 55W_26438_2
Note d’application
Analyzing 26 to 53 GBd PAM4 Optical and Electrical Signals
The need to deliver data rates in excess of 50 Gb/s has created great interest in bringing next generation PAM4 components and systems to market. This paper presents techniques for analyzing 28 GBaud and 53 GBaud optical and electrical PAM4 signals …
Note d’application
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the …

Numéro du document : 48W-61617-0
Fiche d’informations
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

Numéro du document : 55W-61401-2
Note d’application
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes Describe electrical waveform types Understand basic …

Numéro du document : 03Z-8605-7
Guide de présentation
Using FastFrame™ Segmented Memory
This application note explains how to use FastFrame(TM) Segmented Memory feature to capture signal bursts or data packets without using memory to capture unimportant dead time.  This application note applies to the following series of …

Numéro du document : 55W-12112-2
Note d’application
2020 Tektronix and Keithley Product Catalog
We have the right products to ensure your success. Browse our new Tektronix and Keithley Product Catalog and explore our complete line of test and measurement solutions. You’ll find over 130 pages of key product details and specifications …
Guide de sélection
Project 25 Land Mobile Radio (LMR) Solution
Quick overview of the complete Tektronix solution for Project 25 Land Mobile Radio (LMR).

Numéro du document : 37W-30680-0
Fiche d’informations
Tektronix Provides Raspberry Pi with Measurement Solutions to Test and Develop Current and Next Generation High Speed Interfaces
23 GHz Mixed Signal Oscilloscope and 25GS/s Arbitrary Waveform Generators Help Raspberry Pi to Test HDMI, MIPI and USB InterfacesBRACKNELL, UK. March 20, 2017 - Tektronix, Inc., a leading worldwide provider of measurement solutions, today announced …
Actualité
Physical Layer Compliance Testing for 100BASE-TX
This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

Numéro du document : 61W-17381-3
Note d’application
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from …

Numéro du document : 55T-18412-6
Guide de présentation
Windows 7 Ultimate 64 Bit SP1 Operating System Recovery
This document instructs how to restore the instrument operating system.

Numéro du document : 55W-29757-0
Guide de présentation
SDRAM Memory Systems: Embedded Test & Measurement Challenges
DRAM (Dynamic Random Access Memory) is attractive to designers because it provides a broad range of performance and is used in a wide variety of memory system designs for computers and embedded systems. This DRAM memory primer provides an overview of …

Numéro du document : 54W-21473-2
Guide de présentation
Mixed Signal Design Guide
Modern embedded system design and computing systems have become progressively more powerful by incorporating high-speed buses, industry standard subsystems, and more integrated functionality in chips. They have also become more complex, more …

Numéro du document : 55X-24538-0
Note d’application
Maintain Signal Integrity From Bus To Oscilloscope At 30 GHz And Beyond
With serial data rates continuing to climb, the margin between pass and fail has shrunk to the point where noise from the signal and the measurement system can combine to close the eye. This technical article will provide guidance on signal integrity …

Numéro du document : NA link to another web site per Sara Rogers
Article produit
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance …

Numéro du document : 55W-61400-0
Note d’application
New Solution Boosts Accuracy of High-Speed Signal Measurements
Tektronix Introduces SignalCorrect Software, TCS70902 Calibration Source to Quickly Characterize and De-embed Interconnects BEAVERTON, Ore., Jan. 18, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, has introduced a new …
Actualité
Best Practices for MSO/DPO70000/DPO7000 Series oscilloscopes
This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.

Numéro du document : 55W-29755-0
Guide de présentation
OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes
This document identifies the OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes.

Numéro du document : 55W-29756-0
Guide de présentation
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

Numéro du document : 46W-31080-7
Guide de sélection
Debug and Validation of High Performance Mixed Signal Designs
High performance mixed analog and digital systems continue to evolve with increasing performance and complexity. Designers need to quickly find and analyze a wide range of problems from signal integrity issues such as crosstalk or jitter to bus …

Numéro du document : 55W-23433-2
Note d’application
Debugging High-Performance Designs with Mixed Signal Oscilloscopes
These are real world functional examples of how engineers have used the Tektronix MSO70000 Series Performance Mixed Signal Oscilloscope in the following three areas of electronic design: Memory High Speed Serial (PCI Express and HDMI Video) RF

Numéro du document : 55W-29444-0
Livre blanc
Inside the MSO/DPO70000DX Series
Tektronix MSO/DPO70000DX Series oscilloscopes feature a custom, highly advanced, front-end (Multi-Chip Module or MCM), that ensures that the integrity of high-speed signals are maintained before they are sampled. This delivers an industry leading …

Numéro du document : 55W-27024-0
Note d’application
iCapture™ Analog MUX
View an electrical signal in digital and analog forms simultaneously using a single voltage probe with iCapture™ Analog MUX.This white paper discusses the need for probing a circuit as well as the challenges of minimizing probe loading. In addition …

Numéro du document : 55W-24477-1
Livre blanc
DesignCon 2015 Paper – Hybrid Modeled Measured Characterization of a 320 Gbit/s Backplane System
This paper explores a case study of a multilane Ethernet backplane 320 Gbit/s system that is difficult to fully measure and deembed, implements a hybrid method of modeling, deembedding, and measurement, explores improvements to the metrology and …

Numéro du document : 55W-60047-0
Livre blanc
Dual Scope Synchronization
The Tektronix DPO/DSA/MSO70000 models above 12 GHz in bandwidth provide 50 GS/s sampling rate on each of 4 channels simultaneously, or 100 GS/s sampling rate on 2 channels in interleaved mode. With interleaved operation comes the opportunity for …

Numéro du document : 55W-26594-1
Note d’application
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …

Numéro du document : 55W-61093-1
Note d’application
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope …
Actualité
Tektronix Wins "Best in Test" 2010 Award
Prix
Tektronix Releases First Test Solution for MIPI M-PHY® Specification v3.1
Tektronix MSO/DPO70000DX Oscilloscopes, P7600 Series TriMode™ Probes Offer Industry's Lowest Noise Solution for M-PHY MeasurementsBEAVERTON, Ore., November 11, 2014 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced …
Actualité
Tektronix Named Finalist For EDN Innovation Award
Prix
Tektronix Rolls Out HDMI 2.0 Compliance Test and Debug Support
New Test Solution Enables New "4K" Video Monitor Technology for Fast, Consistent and Accurate ResultsBEAVERTON, Ore., June 10, 2014 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced that a new Method of …
Actualité
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

Numéro du document : 55W-29028-13
Guide de sélection
Remote Head Acquisition Improves High Speed Serial Measurement
As high speed serial data rates continue to increase, the need to maximize margin in measurements increases. Coaxial cables, even good quality ones can impact the measurement margin. Remote heads for oscilloscopes provide clear advantages that …

Numéro du document : 55W-29580-0
Note d’application
Ethernet Transmitter Test Application Software
The Ethernet Transmitter Test Application automates 10GBASE-T, NBASE-T, and IEEE802.3bz (2.5G/5G) physical medium attachment (PMA) physical-layer (PHY) electrical testing to provide a fast and accurate way of testing your Ethernet designs.

Numéro du document : 61W-24430-9
Datasheet