Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

DPO7000

La bande passante jusqu’à 3,5 GHz et la fréquence d’échantillonnage jusqu’à 40 G éch./s font de l’oscilloscope DPO7000C un choix évident pour l’analyse de signaux haute vitesse critiques. Plus de 30 packages d’analyse offrent des mesures en profondeur pour les normes de communications, de l’analyse de la gigue, les normes de bus mémoire, l’analyse vectorielle, etc. De plus, le système d’exploitation Windows vous permet d’exécuter votre propre logiciel d’analyse directement sur les instruments.

Prix de base
US $32,100 - US $69,000
Achat/Devis Des questions ? Rejoindre le chat
Bande passante

Jusqu’à 3,5  GHz

Voies analogiques

4

Nombre d‘échantillons

Jusqu’à 500
 millions de points

Fréquences d’échantillonnage

Jusqu’à 40  G éch./s

Mesure et analyse sophistiquées de signaux

Thumbnail

Les outils d’analyse standard comprennent 53 mesures automatisées, des statistiques de mesure, des histogrammes, le test des valeurs limites, les fonctions mathématiques sophistiquées sur le signal, des filtres personnalisables et la prise en charge des plugins mathématiques MATLAB et .NET personnalisés. Il est possible d’ajouter d’autres applications spécialisées, comme l’analyse avancée de gigue et de l’œil et l’analyse RF à large bande, pour étendre les capacités de mesure.

Points forts

  • Caractérisez les paramètres du signal à l’aide d’une suite d’outils de mesure standard
  • L’analyse avancée de la gigue et de la synchronisation caractérise les problèmes d’intégrité du signal et leur source
  • Le logiciel SignalVu assure les mesures et l’analyse spectrale en large bande, avec des options pour l’audio, la modulation, les pulses RF et le temps pour receptacle
  • Le logiciel TekScope Anywhere TM permet d’effectuer des mesures et des analyses hors ligne

Le déclenchement efficace simplifie l’enregistrement

Thumbnail

Capturez facilement les anomalies du signal, par exemple les parasites, les petites impulsions, les infractions de setup et hold et le verrouillage NRZ pour les liaisons de données série jusqu’à 1,25 Gb/s, avec déclenchement Pinpoint®, déclenchement visuel et recherche.

Points forts

  • Plus de 1 400 combinaisons de déclenchement
  • Définissez rapidement sous forme graphique des déclenchements complexes et des critères de recherche avec le déclenchement visuel
  • Les déclenchements série en option offrent des capacités d’enregistrement de signal en fonction des protocoles détectés

Analyse et test de conformité en série dans les règles de l’art

Thumbnail

Simplifiez le débogage et la vérification des systèmes sophistiqués avec les options de décodage de protocole et de déclenchement en série pour les bus à basse et moyenne vitesse. Assurez l’interopérabilité des bus série à moyenne vitesse avec les tests de conformité automatisés.

Points forts

  • Décodage de protocole avec options de déclenchement et d’analyse en série disponibles pour I 2 C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, MIL-STD-1553B, CAN, LIN et FlexRay
  • Packs de tests de conformité automatisés disponibles pour USB 2.0, Ethernet, HSIC, MOST et BroadR-Reach

Mesures de puissance automatisées

Thumbnail

Les mesures et la création de rapports automatisées permettent d’obtenir des mesures simples et reproductibles de la qualité de l’alimentation, des pertes de commutation, des pertes magnétiques, des harmoniques et de bien d’autres éléments pour suivre l’évolution des convertisseurs de puissance actuels. En outre, les sondes de courant et les sondes différentielles TekVPI réduisent le niveau d’incertitude et éliminent les pièges des opérations de mesure.

Points forts

  • L’affaiblissement de commutation de transistor MOSFET et analyse de zone de fonctionnement sûr
  • Les mesures de facteur de puissance et des harmoniques pour la pré-conformité IEC61000-3-2
  • Les mesures d’affaiblissement de l’inducteur et du transformateur sur circuit
  • Test de conformité des adaptateurs d’alimentation USB pour chargeurs de batterie USB2.0 spécification v1.1 et IEC 62684
Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Tarif
DPO7054C 500 MHz 5 G éch./s à 20 G éch./s 25 à 250 millions de points 4 US $32,100
Configuration et devis
DPO7104C 1 GHz 5 G éch./s à 20 G éch./s 25 à 250 millions de points 4 US $40,100
Configuration et devis
DPO7254C 2,5 GHz 10 G éch./s à 40 G éch./s 25 à 500 millions de points 4 US $53,900
Configuration et devis
DPO7354C 3,5 GHz 10 G éch./s à 40 G éch./s 25 à 500 millions de points 4 US $69,000
Configuration et devis
Modèle Bande passante analogique Fréquence d'échantillonnage Longueur d'enregistrement Voies analogiques Tarif
DPO7054C 500 MHz 5 G éch./s à 20 G éch./s 25 à 250 millions de points 4 US $32,100
Configuration et devis
DPO7104C 1 GHz 5 G éch./s à 20 G éch./s 25 à 250 millions de points 4 US $40,100
Configuration et devis
DPO7254C 2,5 GHz 10 G éch./s à 40 G éch./s 25 à 500 millions de points 4 US $53,900
Configuration et devis
DPO7354C 3,5 GHz 10 G éch./s à 40 G éch./s 25 à 500 millions de points 4 US $69,000
Configuration et devis
  Tektronix
DPO7000C
Tektronix
MSO/DPO5000B
Keysight
Série S
LeCroy
HDO6000
Bande passante 500 MHz à 3,5 GHz 350 MHz à 2 GHz 500 MHz à 8 GHz 350 MHz à 1 GHz
Voies analogiques 4 4 4 4
Fréquence d’échantillonnage analogique (toutes voies) Jusqu’à 10 G éch./s Jusqu’à 5 G éch./s Jusqu’à 10 G éch./s Jusqu’à 2,5 G éch./s
Fréquence d’échantillonnage analogique (1 voie) Jusqu’à 40 G éch./s Jusqu’à 10 G éch./s Jusqu’à 20 G éch./s Jusqu’à 2,5 G éch./s
Longueur d’enregistrement maximale en option (1 voie) 500 millions de points 250 millions de points 100 millions de points 250 millions de points
Taux de capture du signal (signaux/s) >310 000 >250 000 Non spécifié Non spécifié
Système d'exploitation Windows Windows Windows Windows

 

Mesures de puissance automatisées

Thumbnail

Les mesures automatisées et la création de rapports permettent d’obtenir des mesures simples et reproductibles de la qualité de l’alimentation, des pertes de commutation, des pertes magnétiques, des harmoniques et de bien d’autres éléments pour suivre l’évolution des convertisseurs de puissance actuels. En outre, les sondes de courant et les sondes différentielles TekVPI réduisent le niveau d’incertitude et éliminent les pièges des opérations de mesure.

Points forts

  • Opt. PWR : Solution sophistiquée de mesure et d’analyse de puissance pour la caractérisation et les tests des composants de puissance et des alimentations, avec test de la qualité de puissance et des harmoniques
  • USBPWR en option : test automatisé de conformité des adaptateurs d’alimentation USB pour chargeurs de batterie USB2.0 spécification v1.1 et IEC 62684

Analyse en série et test de conformité pour l’automobile

Thumbnail

Simplifiez le débogage et la vérification des systèmes automobiles avec les options de décodage de protocole et de déclenchement en série pour les bus CAN, LIN et FlexRay. Assurez l’interopérabilité des composants en série BroadR-Reach et MOST avec les tests de conformité automatisés.

Points forts

  • SR-AUTO en option : déclenchement et décodage de protocole CAN, LIN et FlexRay du contenu des paquets série
  • BRR en option : solution de conformité automatisée BroadR-Reach/100BASE-T1 et 1000BASE-T1
  • MOST en option : solution de test de conformité électrique et de débogage pour hôtes et conceptions MOST50 et MOST150

Décodage et analyse en série intégrés

Thumbnail

Le décodage de protocole, le déclenchement en série et l’analyse pour I 2 C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet et MIL-STD-1553B simplifient le débogage et la vérification de systèmes sophistiqués.

Points forts

  • Déclenchement et décodage de protocole SR-AERO MIL-STD-1553B du contenu des paquets série en option
  • Déclenchement et décodage de protocole SR-COMP RS-232/422/485/UART du contenu des paquets série en option
  • Décodage et recherche automatique sur le contenu des paquets série SR-DPHY MIPI® D-PHY en option
  • Déclenchement et décodage de protocole SR-EMBD I 2 C et SPI sur le contenu de paquets série en option
  • Recherche et décodage de protocole du contenu des paquets série SR-ENET 10BASE-T et 100BASE-TX en option
  • Déclenchement et décodage basse vitesse, pleine vitesse et haute vitesse du contenu des paquets série SR-USB USB 2.0 en option

Tests de conformité série

Thumbnail

Assurez l’interopérabilité des conceptions série USB 2.0 et Ethernet avec les tests de conformité automatisés.

Points forts

  • Caractérisation automatisée ET3, conformité et prise en charge complète de la couche physique pour 10BASE-T, 100BASE-TX et 1000BASE-T en option
  • Test de conformité USB2 en une pression avec instruments automatisés et contrôle de mode de test en option
  • En option, test de qualité du signal électrique HSIC et validation de protocole de l’hôte HSIC et des conceptions
  • Application logicielle complète d’analyse de l’interface mémoire DDRA pour DDR1/2/3/4, LPDDR1/2/3/4 et GDDR3/5 en option

Analyse avancée de la gigue et de la synchronisation

Thumbnail

Avec une analyse complète de la gigue et du diagramme de l’œil, ainsi que des algorithmes de décomposition, DPOJET simplifie la recherche des problèmes d’intégrité du signal et de la gigue et des sources associées dans les conceptions actuelles de systèmes de communication, numériques et série haute vitesse.

Points forts

  • Caractérisez les performances des conceptions de bus haute vitesse en série et en parallèle
  • Caractérisez la gigue et le bruit de l’horloge et des données et l’intégrité du signal
  • Caractérisez la modulation des circuits avec horloge à étalement du spectre
  • Effectuez les tests physiques des normes série comme MIPI® D-PHY, DDR et MOST

Analyse RF à large bande

Thumbnail

Avec le logiciel d’analyse des signaux RF et vectoriels SignalVu, vous disposez des fonctionnalités d’un analyseur de signaux vectoriels et d’un analyseur de spectre, avec les fonctions de déclenchement d’un oscilloscope numérique, en un seul instrument. Utilisez SignalVu pour valider les conceptions à large bande et caractériser les événements spectraux à large bande.

Points forts

  • SVE en option : SignalVu Essentials assure l’analyse et la mesure spectrale large bande
  • SVA en option : mesures audio SignalVu AM/FM/Direct
  • SVM en option : analyse générale de modulation SignalVu
  • SVP en option : SignalVu analyse les signaux à pulse complexes
  • SVT en option : mesures de temps pour receptacle SignalVu - Fréquence et phase
Fiche technique Package logiciel / Option logicielle Description Configuration et devis
Afficher la fiche technique Opt. MTM

Compliance verification and interoperability testing to communication and computing serial standards masks.

Contact Us
Afficher la fiche technique Opt. SV28

LTE Base Station Tx Measurements.

Contact Us
Afficher la fiche technique Opt. SVM

SignalVu General-purpose Modulation Analysis

Contact Us
Afficher la fiche technique Opt. SR-COMP

RS-232/422/485/UART protocol trigger and decode of serial packet content.

Contact Us
Opt. NBASET NBASE-T TekExpress Conformance and Debug Solution Contact Us
Afficher la fiche technique Opt. DJA, DJAN

Simplifies identifying signal integrity concerns, jitter and their related sources and provides the highest sensitivity and accuracy available for real-time oscilloscopes.

Contact Us
Afficher la fiche technique Opt. BRR

BroadR-Reach/100BASE-T1 and 1000BASE-T1 Automated Compliance Solution.

Contact Us
Afficher la fiche technique Opt. SR-AUTO

CAN, LIN, and FlexRay protocol trigger and decode of serial packet content.

Contact Us
Afficher la fiche technique Opt. SR-AERO

MIL-STD-1553B protocol trigger and decode of serial packet content.

Contact Us
Afficher la fiche technique Opt. SVA

SignalVu AM/FM/Direct Audio Measurements.

Contact Us
Afficher la fiche technique Opt. SV26 SignalVu APCO Project 25 transmitter testing and analysis. Contact Us
Afficher la fiche technique Opt. SVE

SignalVu wideband spectral analysis and measurements.

Contact Us
Afficher la fiche technique Opt. SVO SignalVu Flexible OFDM Analysis. Contact Us
Afficher la fiche technique Opt. SV24

WLAN 802.11n measurement application

Contact Us
Opt. SR-810B

Quickly analyze 8b/10b serial buses with automatic decode and search on serial packet content.

Contact Us
Afficher la fiche technique Opt. MOST

Electrical compliance and debug test solution for MOST50 and MOST150 host and device designs.

Contact Us
Afficher la fiche technique Opt. USB2

Perform "one touch" compliance testing with automated instrument and test mode control.

Contact Us
Afficher la fiche technique Opt. USBPWR

Automated compliance testing for USB power adapters to USB2.0 Battery Charger Specification v1.1 and IEC 62684.

Contact Us
Afficher la fiche technique Opt. SVP

SignalVu Advanced Pulse Signal Analysis.

Contact Us
Opt. SR-DPHY

MIPI® D-PHY automatic decode and search on serial packet content.

Contact Us
TekScope Anywhere

An offline waveform analysis tool that unchains your data from your scope and adds additional measurement capability.

Contact Us
Afficher la fiche technique Opt. SR-USB

Automated compliance testing and verification of USB 2.0 and 3.0 for low-speed, full-speed, high speed and superspeed.

Contact Us
Afficher la fiche technique Opt. SR-ENET

10BASE-T and 100BASE-TX protocol search and decode of serial packet content.

Contact Us
Afficher la fiche technique Opt. SV25

WLAN 802.11ac measurement application

Contact Us
Afficher la fiche technique Opt. CMENET3

TekExpress Ethernet Automated 10/100/1000 BASE-T Compliance Testing Solution

Contact Us
Opt. ET3

Automated characterization, compliance and full PHY layer support for 10BASE-T, 100BASE-TX and 1000BASE-T.

Contact Us
Afficher la fiche technique Opt. SR-EMBD

I2C and SPI protocol trigger and decode of serial packet content.

Contact Us
Afficher la fiche technique Opt. D-PHY

Verify to the MIPI D-PHY specification by rapidly characterizing and discovering sources of jitter and signal integrity concerns using the fully flexible and customizable test setup. Using DPOJET, Option D-PHY enables transmitter high-speed data-clock timing measurements, along with a full range of electrical characteristics in high-speed or low-power modes.

Contact Us
Afficher la fiche technique Opt. SV23

WLAN 802.11a/b/g/j/p measurement application

Contact Us
Opt. DDRA, LP-DDR4

Complete memory interface analysis package for DDR1/2/3/4, LPDDR1/2/3/4 and GDDR3/5. Option LP-DDR4 for LPDDR4 is available to use only on MSO/DPO70000 oscilloscopes.

Contact Us
Afficher la fiche technique Opt. SV27

SignalVu Bluetooth Basic LE TX SIG measurements

Contact Us
Afficher la fiche technique Opt. PWR

Power measurement and analysis solution for characterization and testing of power devices and power supplies including power quality and harmonic testing.

Contact Us
Afficher la fiche technique Opt. SVT

SignalVu Settling Time Measurements – Frequency and Phase.

Contact Us
Opt. SR-PCIE

PCI Express serial bus support with automatic trigger and decode on serial packet content.

Contact Us
Sonde de courant
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique TCP0020 Sonde de courant AC/DC, 20 A, BP 50 MHZ, interface TekVPI, certificat d’étalonnage traçable Configuration et devis
TCP0030 Current Probe: 120 MHz, 1 mA to 42 A, AC/DC, TekVPI Configuration et devis
Afficher la fiche technique TCP0030A Sonde de courant AC/DC, 30 A DC, DC à 120 MHZ, avec interface TekVPI, certificat d’étalonnage traçable Configuration et devis
Afficher la fiche technique TCP0150 Sonde de courant : 20 MHz, 5 mA à 212 A, AC/DC, TekVPI Configuration et devis
Afficher la fiche technique TCP202 Current Probe: 50 MHz, 10 mA to 15 A, AC/DC, TekProbe Configuration et devis
Afficher la fiche technique TCP202A Sonde de courant AC/DC, couplage DC, 15 A DC, BP 50 MHz, interface TekProbe Level 2, certificat d’étalonnage traçable Configuration et devis
Sonde passive
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique P6101B Sonde passive 15 MHz, 1 X Configuration et devis
Afficher la fiche technique P6139B Sonde passive : 500 MHz, 10 X, BNC Configuration et devis
Sondes asymétriques basse tension
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique P6158 PROBE, PASSIVE; 3.0 GHZ, 20X, WITH READOUT Configuration et devis
Afficher la fiche technique P6243 Sonde active : 1 GHz, 10 X, asymétrique, TekProbe Configuration et devis
Afficher la fiche technique P6245 SONDE FET ACT, >1,5 GHZ, 10 X, Configuration et devis
Afficher la fiche technique TAP1500 Sonde active : 1,5 GHz, 10 X, asymétrique, TekVPI Configuration et devis
Afficher la fiche technique TAP2500 Sonde active : 2,5 GHz, 10 X, asymétrique, TekVPI Configuration et devis
Afficher la fiche technique TAP3500 Sonde active : 3,5 GHz, 10 X, simple, TekVPI Configuration et devis
Sondes asymétriques haute tension
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique P5100A Sonde haute tension : 500 MHz, 100 X, 2,5 kV, asymétrique, BNC Configuration et devis
Afficher la fiche technique P6015A SONDE HAUTE TENSION, 75 MHZ, 40 KV, 1000 X 3 M - CERTIFICAT D’ÉTALONNAGE TRAÇABLE Configuration et devis
Sondes basse tension différentielles
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique P6246 Differential Probe: 400 MHz, 1X/10X, +/- 8.5V, TekProbe Configuration et devis
Afficher la fiche technique P6247 SONDE, DIFF, ACT, BP 1 GHZ,+/-0,85/8,5 V, 1 PF, TPI - CERTIFICAT D’ÉTALONNAGE TRAÇABLE Configuration et devis
Afficher la fiche technique P6248 SONDE DIFFÉRENTIELLE 1,7 GHZ, CERTIFICAT D’ÉTALONNAGE TRAÇABLE Configuration et devis
Afficher la fiche technique TDP1500 Sonde différentielle : 1,5 GHz, 1 X/10 X, +/-8,5 V, TekVPI Configuration et devis
Afficher la fiche technique TDP3500 Sonde différentielle : 3,5 GHz, 5 X, +/-2 V, TekVPI Configuration et devis
Sondes haute tension différentielles
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique TDP0500 Sonde différentielle : 500 MHz, 5 X/50 X, +/-42 V, TekVPI Configuration et devis
Afficher la fiche technique TDP1000 Sonde différentielle : 1 GHz, 5 X/50 X, +/-42 V, TekVPI Configuration et devis
Afficher la fiche technique THDP0100 SONDE différentielle : SONDE DIFFÉRENTIELLE HAUTE TENSION 100 MHZ TekVPI Configuration et devis
Afficher la fiche technique THDP0200 SONDE différentielle : SONDE DIFFÉRENTIELLE HAUTE TENSION 200 MHZ TEKVPI Configuration et devis
Afficher la fiche technique TMDP0200 SONDE différentielle : SONDE DIFFÉRENTIELLE MOYENNE TENSION 200 MHZ, TMPD0200 Configuration et devis
Sondes isolées
Lien vers la fiche technique Sonde Description Configuration et devis
Afficher la fiche technique TIVH02 Sonde différentielle à isolation optique IsoVu, 200 MHz, TekVPI, câble de 3 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVH02L Sonde différentielle à isolation optique IsoVu, 200 MHz, TekVPI, câble de 10 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVH05 Sonde différentielle à isolation optique IsoVu, 500 MHz, TekVPI, câble de 3 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVH05L Sonde différentielle à isolation optique IsoVu, 500 MHz, TekVPI, câble de 10 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVH08 Sonde différentielle à isolation optique IsoVu, 800 MHz, TekVPI, câble de 3 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVH08L Sonde différentielle à isolation optique IsoVu, 800 MHz, TekVPI, câble de 10 m, sondes 50X(MMCX50X) et 500X(SQPIN500X) incluses Configuration et devis
Afficher la fiche technique TIVM1 Sonde différentielle à isolation optique IsoVu, 1 GHz, TekVPI, câble de 3 m, sondes 5X(IVTIP5X) et 25X(IVTIP25X) incluses Configuration et devis
Afficher la fiche technique TIVM1L Sonde différentielle à isolation optique IsoVu, 1 GHz, TekVPI, câble de 10 m, sondes 5X(IVTIP5X) et 25X(IVTIP25X) incluses Configuration et devis
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Cli
Numéro de la FAQ66181 15 Jan 2020
How do I Set Up a LIN serial Bus decode?
For doing Local Interconnect Network (LIN) bus decode Tektronix recommends using a DPO/MSO/MDO series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus channel
Numéro de la FAQ64781 15 Jan 2020
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
Numéro de la FAQ69501 15 Jan 2020
How do I Set up a Military Standard 1553 serial bus decode?
For doing Military Standard 1553 bus decode Tektronix recommends using a DPO/MSO/MDO 2000 or higher series oscilloscope. This feature can be purchased as a module or option key on any of these types of oscilloscopes. Start by turning it on the bus ch
Numéro de la FAQ64776 15 Jan 2020
What is the maximum bit rate a decoded SPI bus can trigger on?
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level.  For more question
Numéro de la FAQ62256 15 Jan 2020
When running SPC (signal path compensation) on my oscilloscope, I get the message that SPC failed.  What does failing SPC indicate?
When an oscilloscope says SPC failed, 99.9 percent of the time it is a hardware failure that will need repair.  A few things you can do before sending in for repair: Make sure all inputs (probes and cables) are removed from all the channel inputs.
Numéro de la FAQ59621 15 Jan 2020
What are some best practices that I should use when operating a Tektronix MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, or DSA70000/B/C/D oscillosope?  
You can refer to our Best Practices guide at: www.tek.com/dl/81W_23825_1.pdf Included in the guide is information regarding the following subject areas: Preventing Electrostatic Discharge Signal Path Compensation and instrument calibration C
Numéro de la FAQ69171 15 Jan 2020
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support C
Numéro de la FAQ63266 15 Jan 2020
What is aliasing and how do I detect it and fix it on my oscilloscope?
Aliasing is basically a form of under sampling and what is displayed on the scopes is an indistinguishable waveform. The under sampled waveform is then contstructed to look like a slower frequency waveform or a flat line in the case of the sample rat
Numéro de la FAQ64691 15 Jan 2020
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix o
Numéro de la FAQ66221 15 Jan 2020
When should I run SPC?
Signal Path Compensation (SPC) can be run at any time. The best times to run SPC are: After the oscilloscope has been powered on and has warmed up for 20 minutes or more. If the temperature has changed more than 5 degrees C since the last SPC was r
Numéro de la FAQ60156 15 Jan 2020
How do I set up a RS232 bus decode?
The procedure to set up a RS232 bus decode and trigger is simple once you understand the basics. First you need to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the screen as possible with
Numéro de la FAQ64761 15 Jan 2020
How Do I Use a Link Partner in Testing with TDSET3?
Several of the tests in Ethernet Compliance Testing can be performed using a Link Partner (especially in 10BASE-T). This is useful when the test requires the Device Under Test (DUT) to generate a pseudo-random sequence, but you do not have direct co
Numéro de la FAQ468146 15 Jan 2020
How do I set up a I2C Bus Decode?
The procedure to set up a I2C bus decode and trigger is simple once you understand the basics. First you have to have the correct module or scope option. Second make sure your signal is on screen and taking up as much of the DAC as possible with good
Numéro de la FAQ64756 15 Jan 2020
How Do I Create an Eye Diagram in DPOJET?
DPOJET is a powerful tool for Jitter and Timing analysis of high speed serial data signals.  The eye diagram allows for quick visual inspection of the signal quality of high-speed serial signals.  Creating an eye diagram in DPOJET is easy and can be
Numéro de la FAQ467706 15 Jan 2020
What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground sp
Numéro de la FAQ64441 15 Jan 2020
My windows scope doesn't remember it's Static IP address after reboot, what can I do?
The fact that your scope can't remember its statically allocated IP address after a power down and power on isn't common or correct. It might be related to the network you were on at some point in time. None the less on the reason, the way to quickly
Numéro de la FAQ69386 15 Jan 2020
I am trying to use RS232 communication to my scope and it is not working. What can I do to fix it?
The following is a trouble shooting guide which goes through the possible issues and how to fix them. Getting Started If you’re having communications problems between your PC and Oscilloscope this document provides the steps to help you get the comm
Numéro de la FAQ56651 15 Jan 2020
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check itsel
Numéro de la FAQ467516 15 Jan 2020
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start Applicat
Numéro de la FAQ69181 15 Jan 2020
Can Microsoft Remote Desktop be used with Windows based oscilloscopes?
Yes, the Remote Desktop feature of the Professional Editions of Windows can be used on Tektronix DPO/MSO/CSA Series Oscilloscopes running Windows XP or later operating systems. In order to use the Remote Desktop feature of Windows, you will need to e
Numéro de la FAQ61606 15 Jan 2020
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can
Numéro de la FAQ64561 15 Jan 2020
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from th
Numéro de la FAQ471231 15 Jan 2020
How do I set up a USB bus decode?
First you must have the USB module or option key that enables USB decoding for your scope as well as proper probes. For help finding the right probe use our probe selector tool. When you go into the bus option you must select USB and then make sure y
Numéro de la FAQ64726 15 Jan 2020
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 MSO2000 RMD2000 DPO3
Numéro de la FAQ64571 15 Jan 2020
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp fro
Numéro de la FAQ471576 15 Jan 2020
How can I increase the measurement accuracy using automated measurements vs cursors?
While Cursors are quick and easy at approximating measurements, using the automated measurements can give you a much better and accurate measurement results. Here are some techniques to be successful in making accurate measurements. Always use automa
Numéro de la FAQ62606 15 Jan 2020
MSO5000/DPO5000/DPO7000 Series: Is the hard drive removable?
Yes. The MSO5000/DPO5000 hard drive is removable from the right side of the scope. Yes. The DPO7000/DPO7000C hard drive is removable from the back of the scope.
Numéro de la FAQ55926 15 Jan 2020
What is SPC?
SPC is the acronym for Signal Path Compensation. SPC's.  Running Signal Path Compensation corrects for DC inaccuracies caused by temperature variations and/or long-term drift. The benefit of running SPC is that is optimizes the oscilloscope's capabil
Numéro de la FAQ60041 15 Jan 2020
“Low disk space” or “page-file” or “Virtual Memory" errors/warnings after performing a OS Restore or backup on oscilloscopes running Win7?
If, after performing an OS restore or creating a backup image, the oscillscope reports “low disk space”, “page-file”, “Virtual Memory" errors/warnings, TekScope not starting up, or experiencing odd Windows behavior, try the following proceedure to r
Numéro de la FAQ64516 15 Jan 2020
How do I use the Floating Licenses for my Tektronix Oscilloscope?
Tektronix offers floating licenses for the MSO/DPO5000, DPO7000, DPO/DSA70000 and MSO70000 Series Oscilloscopes.  When you have a floating license, you will receive a email that explains how to access the licenses.   You will have to be a MyTek membe
Numéro de la FAQ64826 15 Jan 2020
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats
Numéro de la FAQ782291 15 Jan 2020
How do I connect an SMA male output to Oscilloscopes with TekVPI BNC inputs?
Use a Tektronix part number 015-0572-XX SMA female to BNC male adapter. This adapter will plug onto the BNC on the front of the scope and connect to a SMA cable. For more questions please press the "Contact Us" button on the right of the screen.   
Numéro de la FAQ63516 15 Jan 2020
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA. Agi
Numéro de la FAQ69176 15 Jan 2020
The Waveform Graticule on my scope has disappeared after using Remote Desktop.  How do I get it back?
When you connect to the instrument using Remote Desktop, Windows must switch the graphics adapter between with physical graphics adapter in the PC/Instrument to a Virtual Graphics adapter.  When you resume using the instrument the graphics adapter mu
Numéro de la FAQ470416 15 Jan 2020
Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.  Equipment list: Windows 7 oscil
Numéro de la FAQ64766 15 Jan 2020
How do I set up a CAN bus decode?
Depending on what scope you have will depend on what options are availiable for decoding your CAN signal. For all the DPO/MSO2000/3000/4000/5000 and MDO3000/4000 Series scopes there are modules or license keys that can be purchased. Once you have one
Numéro de la FAQ64751 15 Jan 2020
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the corr
Numéro de la FAQ69186 15 Jan 2020
Do you have a detailed application note on how to use DPO7000C Series Oscilloscopes for debugging embedded systems+ serial signals+ power designs+ and general purpose design applications?
Please see the DPO7000C Series Lab Exercise Book for more details.
Numéro de la FAQ58171 15 Jan 2020
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the
Numéro de la FAQ64796 15 Jan 2020
Are the P7700 Series TriMode Probes Compatible with my Oscilloscope?
The P7700 Series TriMode Probes are compatible with all DSA DPO MSO 70000 Series real-time oscilloscopes running Windows 7 or Windows 10 and firmware version 10.6 or higher. Oscilloscopes capable of these requirements include the following: · DPO700
Numéro de la FAQ255371 15 Jan 2020
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right? The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequenc
Numéro de la FAQ58571 15 Jan 2020
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker
Numéro de la FAQ247211 15 Jan 2020
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available upd
Numéro de la FAQ782296 15 Jan 2020
How do I update the firmware on an MSO5000 series scope or other Windows 7 scope?
The procedure for updating the firmware on this scope and any other Windows 7 scope is the same; download the firmware from our website, put it on the scope, and run the setup file. To find out what version you currently have installed on your scope,
Numéro de la FAQ66226 15 Jan 2020
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the
Numéro de la FAQ64791 15 Jan 2020
What if my DPO/DSA 7000/70000 Oscilloscope is losing its time or date settings, or I am getting CMOS Read Error, CMOS checksum error, or CMOS Battery Failure messages?
You may need to change the CMOS battery on the motherboard.  Refer to attached instructions for changing the battery and resetting the CMOS. Refer to the respective instrument service manual for instructions how to gain access to the instrument moth
Numéro de la FAQ72171 15 Jan 2020
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such
Numéro de la FAQ69266 15 Jan 2020
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft,
Numéro de la FAQ780986 15 Jan 2020
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit
Numéro de la FAQ474266 15 Jan 2020
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes. Spe
Numéro de la FAQ56226 15 Jan 2020
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes (v
Numéro de la FAQ56016 15 Jan 2020
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital
Numéro de la FAQ60306 15 Jan 2020
Digital Phosphor Oscilloscopes
Tektronix understands that engineers rely on an oscilloscope throughout their design cycle, from prototype turn-on to production testing. The DPO7000 Series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance a

Numéro du document : 48W-26543-21
Datasheet 12 Jan 2020
We are failing 10BASE-T Return Loss tests but not 100BASE-TX or 1000BASE-T tests on the same port+ yet 10BASE-T is the only one that the procedure for calibration and test refers to the use of jumper J241 on the test TF-GBE-BTP or TF-GBE-ATP fixture. What is the purpose of the jumper J241?
J241 is only required for 10BASE-T and not the other data rates. The issue arises from the fact that for 10BASE-T, the A differential pair is used for Tx, and the B differential pair is used for Rx. This is quite different from the other data rates.
Numéro de la FAQ61071 30 Dec 2019
Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip - Groun
Numéro de la FAQ58111 30 Dec 2019
DPO7000: Can the GPIP interface port be used to control other instruments?
Yes. The scope can be a GPIB Device or it can be used as a Host to control other GPIB devices. 
Numéro de la FAQ55441 30 Dec 2019
Can DPO7104/DPO7104C option 2SR be field-installed?
No – it is hardware option that can be added ONLY at time of initial scope order
Numéro de la FAQ55241 30 Dec 2019
DPO7000: Can memory be added later if I buy the scope with standard memory length?
Yes. Memory can be upgraded later. Field upgrade kits are available. Order DPO-UP with the following optionsOpt. RL02Record length upgrade from 12.5M samples/ch  to 25M samples/chOpt. RL05Record length upgrade from 12.5M samples/ch  to 50M samples/ch
Numéro de la FAQ55436 30 Dec 2019
I really like the idea of a removable hard disk drive for my oscilloscope+ but I’m concerned about losing the instrument calibration information. If I replace the original HDD+ will the cal constants be lost+ or is there a file that I need to transfer to the new HDD+ or are the constants stored in NVRAM?
Factory calibration data, serial number, and option keys are stored in the NVRAM. Signal Path Compensation (SPC) data is stored on the hard drive. To be sure that your oscilloscope performance is optimized for the current temperature and to remove l
Numéro de la FAQ58421 30 Dec 2019
MSO5000/DPO5000/DPO7000 Series: How compatible is the GPIB command set with the current TDS5000 and TDS7000 instruments?
The same GPIB grammar is used. Differences in the horizontal time base model and new product features might require some changes in the programs that were developed for older scopes.
Numéro de la FAQ55921 30 Dec 2019
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

Numéro de référence : 066093812
Software 27 Dec 2019
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX-SX - V10.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance software

Numéro de référence : 066186017
Software 27 Dec 2019
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance.

Numéro du document : 55W-61400-0
Note d’application 27 Dec 2019
Tools to Boost Oscilloscope Measurement Resolution to More than 11 Bits
Oscilloscope measurement resolution depends on more than whether the analog-to-digital converter is an 8-bit, 10-bit, or 12-bit device.   The whole system, from end to end, must be optimized to mitigate the effects of noise, as well as improve digita

Numéro du document : 48W-27802-4
Note d’application 27 Dec 2019
Physical Layer Compliance Testing for 100BASE-TX
This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

Numéro du document : 61W-17381-3
Note d’application 27 Dec 2019
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use the protocol trigger, decode and search capabilities

Numéro du document : 48W-19040-21
Note d’application 27 Dec 2019
Visual Triggering
If dealing with complex signals, serial data or needing to capture signals from multiple channels then learn how Visual Trigger and Search (standard trigger feature) can quickly simply trigger setups and capture and locate events of interest.

Numéro du document : 48W-27803-3
Dossier technique 27 Dec 2019
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

Numéro de référence : 071298005
Manual 26 Dec 2019
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes

Numéro de référence : 071298006
Manual 26 Dec 2019
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
When comparing past, present and future automobiles, one trend is clear: cars have become data centers on wheels. Within each vehicle, the volume of data from safety systems, onboard sensors, navigation systems, and so on (and the reliance on that da

Numéro du document : 48W-61611-0
Guide de présentation 26 Dec 2019
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get ti

Numéro du document : 51W-60171-2
Note d’application 26 Dec 2019
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

Numéro du document : 55W-29028-13
Guide de sélection 26 Dec 2019
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscillo

Numéro du document : 55W-61093-1
Note d’application 26 Dec 2019
SOLUTIONS FOR SCIENTIFIC AND ENGINEERING RESEARCH

Numéro du document : 55W_30503_2
Brochure 26 Dec 2019
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes Describe electrical waveform types Understand basic os

Numéro du document : 03Z-8605-7
Guide de présentation 26 Dec 2019
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply designs

Numéro du document : 55W-61401-2
Note d’application 26 Dec 2019
Comparison of New versus Legacy Ethernet Compliance Test Automation
New test automation software is available for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T compliance testing.  The new "CMENET3" solution is based on the TekExpress framework and provides significant test time and workflow improvements over the pre

Numéro du document : 48W-61617-0
Fiche d’informations 26 Dec 2019
Vector Signal Analyzer+ Spectrum Analyzer+ and Digital Oscilloscope Combination Breaks New Ground
Article produit 26 Dec 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences

Numéro du document : 46W-31080-7
Guide de sélection 26 Dec 2019
Power Supply Measurement and Analysis Primer
A power supply is a component, subsystem, or system that converts electrical power from one form to another; commonly from alternating current (AC) utility power to direct current (DC) power. The proper operation of electronic devices ranging from pe

Numéro du document : 55T-18412-6
Guide de présentation 26 Dec 2019
MSO/DPO70000DX, DSA/DPO70000D, MSO70000/C, DSA/DPO70000B/C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Service Manual

Numéro de référence : 077007610
Manual 25 Dec 2019
MSO70000DX, DPO70000DX, MSO70000C, DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Quick Start User Manual

Numéro de référence : 071298004
Manual 25 Dec 2019
DPOJET Jitter, Noise and Eye Diagram Analysis Solution
DPOJET Jitter, Noise and Eye Diagram Analysis Solution Printable Application Help

Numéro de référence : 077004827
Manual 25 Dec 2019
Reference Waveform File Format
TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D, DSA70000/B/C/D, MSO70000/C, MSO5000, and DPO5000 Series Other

Numéro de référence : 077022005
Manual 26 Nov 2019
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

Numéro de référence : 077022011
Manual 26 Nov 2019
TekExpress DisplayPort
Automated Solutions

Numéro de référence : 077062105
Manual 26 Nov 2019
TekExpress DisplayPort
Automated Solutions

Numéro de référence : 077062104
Manual 26 Nov 2019
TekExpress
MHL Test Adapter Test Fixture Read This First

Numéro de référence : 071301300
Manual 26 Nov 2019
TekExpress DisplayPort
Automated Solutions

Numéro de référence : 077062103
Manual 26 Nov 2019
TekExpress
MHL Automated Solutions Online Help

Numéro de référence : 077062001
Manual 26 Nov 2019
TekExpress DisplayPort
Automated Solutions

Numéro de référence : 077062102
Manual 26 Nov 2019
TekExpress DisplayPort
Automated Solutions

Numéro de référence : 077062101
Manual 26 Nov 2019
TekExpress
DisplayPort Automated Solutions Online Help

Numéro de référence : 077062100
Manual 26 Nov 2019
TekExpress
DisplayPort Automated Solutions

Numéro de référence : 077062106
Manual 26 Nov 2019
SignalVu Essentials
Vector Signal Analysis Software

Numéro de référence : 077022411
Manual 26 Nov 2019
016-1983-02, 016-1985-02, and 016-1988-02 and above
Rackmount Kits Instructions

Numéro de référence : 075103901
Manual 26 Nov 2019
SignalVu Essentials
Vector Signal Analysis Software Reference

Numéro de référence : 077022410
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001022
Manual 26 Nov 2019
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX, and DSA70000/B/C/D User Manual

Numéro de référence : 071298903
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001019
Manual 26 Nov 2019
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

Numéro de référence : 071298905
Manual 26 Nov 2019
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series Other

Numéro de référence : 077022010
Manual 26 Nov 2019
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

Numéro de référence : 077125300
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

Numéro de référence : 077006220
Manual 26 Nov 2019
DPO-UP
Upgrades for DPO70000SX, MSO70000/C/DX, DSA70000/B/C/D, DPO7000/B/C/D/DX, DPO7000/C, MSO5000/B, and DPO5000/B Series Instruments Instructions

Numéro de référence : 075103804
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

Numéro de référence : 077006216
Manual 26 Nov 2019
ADK
Application Developer Kit Online Help

Numéro de référence : 077069300
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

Numéro de référence : 077006217
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001023
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001021
Manual 26 Nov 2019
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

Numéro de référence : 077004826
Manual 26 Nov 2019
TekExpress Ethernet Tx Compliance Solution
TekExpress Ethernet Tx Compliance Solution Online Help

Numéro de référence : 077125301
Manual 26 Nov 2019
DPOPWR Advanced
Advanced Power Analysis Software Online Help

Numéro de référence : 077001809
Manual 26 Nov 2019
Best Practices
MSO70000/C/DX, DPO7000/C, DPO70000/B/C/D/DX/SX, and DSA70000/B/C/D User Manual

Numéro de référence : 071298904
Manual 26 Nov 2019
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

Numéro de référence : 077004822
Manual 26 Nov 2019
DPO70000SX, MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001020
Manual 26 Nov 2019
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

Numéro de référence : 077004825
Manual 26 Nov 2019
DPOJET
Jitter, Noise and Eye Digram Analysis Tools

Numéro de référence : 077004823
Manual 26 Nov 2019
DPOPWR Advanced
Advanced Power Analysis Software

Numéro de référence : 077001810
Manual 26 Nov 2019
DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, and DPO5000/B Series
Digital Phosphor Oscilloscopes Declassification and Security Instructions

Numéro de référence : 077024507
Manual 26 Nov 2019
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes

Numéro de référence : 077001025
Manual 26 Nov 2019
DDR
Analysis Online Help

Numéro de référence : 077023108
Manual 26 Nov 2019
TekExpress
HDM Automated Solutions Online Help

Numéro de référence : 077092600
Manual 26 Nov 2019
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

Numéro de référence : 077006315
Manual 26 Nov 2019
MSO/DPO70000DX, MSO/DPO70000C, DPO7000/C, MSO5000/B, and DPO5000/B Series
Series Oscilloscopes Specifications and Performance Verification

Numéro de référence : 077006314
Manual 26 Nov 2019
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000B, and DPO5000B Series
Digital Phosphor Oscilloscopes Online Help

Numéro de référence : 077006214
Manual 26 Nov 2019
MOS/DPO70000DX, MSO/DPO70000C, DPO7000C, MSO5000/B, and DPO5000/B Series
Digital Oscilloscopes Programmer Manual

Numéro de référence : 077001018
Manual 26 Nov 2019
OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes
This document identifies the OS Restore Process for MSO/DPO70000/DPO7000 Series oscilloscopes.

Numéro du document : 55W-29756-0
Guide de présentation 26 Nov 2019
How Do You Get the Most Out of Your Tektronix Performance Oscilloscope
Understand the important signal acquisition and usability features of your oscilloscope to achieve quicker results. This application will show you several features of the DPO7000 and DPO/DSA70000B that help you address the challenges of signal integ

Numéro du document : 55W-20959-1
Note d’application 26 Nov 2019
Choose the Right Platform for Your Jitter Measurements
This document will explain some essential jitter terms, and then go on to discuss jitter measurements and the tools best suited for evaluating and quantifying jitter, when working with serial data communication architectures.

Numéro du document : 37W-19858-2
Dossier technique 26 Nov 2019
DPO7000C Series vs. Keysight S-Series
Compares Tektronix DPO7000C Series oscilloscopes to Keysight S-Series oscilloscopes. Compares general specifications, analog-to-digital converter performance, waveform capture rate, triggering, and other features.

Numéro du document : 48W-60205-1
Compétitif 26 Nov 2019
Best Practices for MSO/DPO70000/DPO7000 Series oscilloscopes
This document summarizes the Best Practices for using Tektronix MSO70000/C, DPO7000/C, DPO70000/B/C/D and DSA70000/B/C/D Series products.

Numéro du document : 55W-29755-0
Guide de présentation 26 Nov 2019
Isolating Meta-stable Glitches in a 1.25 Gb/s Data Stream
This video compares the ability of the Tektronix DPO7000, LeCroy SDA 6020 and Agilent 54855A to use glitch triggering to isolate narrow metastable signal pulses that may exist in a design. To view the video, please select your connection speed below:
Compétitif 26 Nov 2019
Power Supply Measurement and Analysis with DPOPWR Application Software
      Discover how to make many common power measurements with Tektronix oscilloscopes and the DPOPWR power analysis software.  Included is useful information on probing, and characterizing power supplies and measuring switching loss, safe operating

Numéro du document : 54W-23880-4
Note d’application 26 Nov 2019
DDRA - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000-B-C-D-DX, DPO70000SX - Win 7 - V10.1.1
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).br> Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) ar

Numéro de référence : 066189001
Software 12 Nov 2019
DDRA - DDR Analysis (DPO/DSA/MSO, 5K/7K/70K B/C/D/DX/SX Series) - Win10 - V10.2.0
DDR Analysis is a standard specific solution tool for Tektronix Performance Digital Oscilloscopes (DPO/DSA/MSO 5K/7K/70K B/C/D/DX/SX series).Options DJA (Jitter and Eye Diagram Analysis Tool - Advanced) and ASM (Advanced Search & Mark) are requir

Numéro de référence : 066189005
Software 12 Nov 2019
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX) - V10.8.1
Deployment Package for DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software.<br><br>Thi

Numéro de référence : 066141829
Software 12 Nov 2019
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX - V10.8.3
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX. It contains the TekScope Firmware and compatible application software. This software is a self-extra

Numéro de référence : 066141832
Software 12 Nov 2019
Deployment Package for DPO7000C: V10.5.3
Deployment Package for DPO7000C.It contains the TekScope Firmware and compatible application software.This software is a self-extracting executable consisting of the main oscilloscope software version 10.5.3 and the following optional applications:1)

Numéro de référence : 066141821
Software 12 Nov 2019
Deployment Package for DPO7KC, DPO-DSA-MSO70KC and DPO-DSA70KD Win7 series oscilloscopes V6.8.1
This software is a self-extracting executable consisting of the main oscilloscope software version 6.8.1 and the following optional applications: 1. 10G-KR Compliance, Debug, and Decode Solution, Version 6.0.1.103 2. DDRA Memory Interface Electrica

Numéro de référence : 066141804
Software 12 Nov 2019
Deployment Package for DPO5000, MSO5000, DPO5000B, MSO5000B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, Win7, V7.6.1
This software is a self-extracting executable consisting of the main oscilloscope software version 7.6.1 and the following optional applications:1) TekScope v7.6.12) Report Generator v3.3.3.13) Jitter and Eye Diagram Analysis Tool v7.1.2.384) DDRA An

Numéro de référence : 066141813
Software 12 Nov 2019
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.2
This is a submission for testing this application in the Audit Protected classification. The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST15

Numéro de référence : 066142803
Software 12 Nov 2019
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX-Win7 and Win10 - V10.0.7
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key

Numéro de référence : 066164512
Software 12 Nov 2019
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V6.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurem

Numéro de référence : 066142801
Software 12 Nov 2019
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0029
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179002
Software 12 Nov 2019
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T & 10GBASE-T) - v1.0.0
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE802.3bz, section 126, and the NBASE-T specification. This allows you to quickly and efficiently test E

Numéro de référence : 066185200
Software 12 Nov 2019
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 and Win 10 - V10.0.6
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key

Numéro de référence : 066164511
Software 12 Nov 2019
DPOJET - DPO7000-C, DPO-MSO5000, DPO-DSA-MSO70000-C-D - Win 7, V6.0
The DPOJET Jitter and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key:

Numéro de référence : 066145300
Software 12 Nov 2019
Performance DPO Firmware for AUDIT Use Only. V7.6.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as t

Numéro de référence : 066170705
Software 12 Nov 2019
TekExpress HEAC - DPO7000-C-DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V1.3.8
HDMI Ethernet Audio Back Channel (HEAC) which is part of HDMI 1.4a/b specifications enables networking of HDMI devices, speeds up signaling between Transmitter and Receiver devices and also provides a faster path for the audio return channel. Optio

Numéro de référence : 066116808
Software 12 Nov 2019
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000,DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.1
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measureme

Numéro de référence : 066142805
Software 12 Nov 2019
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.0.1
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option

Numéro de référence : 066164502
Software 12 Nov 2019
TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - Win 7, V1.0.2
The Tektronix TekExpress BroadR-Reach/100BASE-T1 Automated Compliance Solution is an automotive Ethernet test solution provides automated compliance support for BroadR-Reach V3.2 specifications and IEEE P802.3bw (100BASE-T1) requirements. The complia

Numéro de référence : 066186000
Software 12 Nov 2019
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win10 - V10.0.11
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO, DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option ke

Numéro de référence : 066164515
Software 12 Nov 2019
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option k

Numéro de référence : 066164509
Software 12 Nov 2019
DPOJET-DPO7000C, DPO-MSO5000B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as t

Numéro de référence : 066172104
Software 12 Nov 2019
Performance DPO Firmware for AUDIT Use Only - V10.5.3
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as th

Numéro de référence : 066170709
Software 12 Nov 2019
Performance DPO Firmware for AUDIT Use Only- V10.5.1
If you wish to manually update the firmware and application software on your oscilloscope, please visit www.tek.com and select Services & Support. Then choose Downloads, Manuals and Data sheets. Search for “Deployment Package” and choose SW as t

Numéro de référence : 066170708
Software 12 Nov 2019
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.2
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option

Numéro de référence : 066164503
Software 12 Nov 2019
DPOJET Deployment Package - DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX - Win 7, V7.1.3
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option

Numéro de référence : 066164504
Software 12 Nov 2019
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.1
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to-chi

Numéro de référence : 066152505
Software 12 Nov 2019
Session Exporter tool for TekScopeAnywhere, TM
Session Exporter Application saves a session (.tss) file that can be recalled on TekScope Anywhere ™ (Offline Scope). The session file contains scope setup, DPOJET setup, waveforms and other related files. All the applicable settings will be recalled

Numéro de référence : 066177200
Software 12 Nov 2019
TekScope Anywhere, TM
TekScope Anywhere™ brings the power of the oscilloscope analysis environment to the PC. Your workflow becomes more flexible because you can now perform complex analysis tasks including timing, eye, and jitter analysis outside of the lab. Waveform dat

Numéro de référence : 066177100
Software 12 Nov 2019
SignalVu - DPO7000C, DPO-DSA-MSO70000C, DPO-DSA70000D, DPO-MSO70000DX, DPO-MSO5000 - Win 7, V3.8.0108
SignalVu Vector Signal Analysis runs as an option to the DPO7KC,DPO-DSA-MSO70KC,DPO-DSA70KD,DPO-MSO70KDX,and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066126309
Software 12 Nov 2019
HSIC - DPO-DSA-MSO 5000B, 7000C and 70000C, D, DX - Win7, V10.1.0
HSIC (High-Speed Inter-Chip) is an industry standard for USB chip-to-chip interconnects with a 2-signal (strobe, data) source synchronous serial interface. It eliminates USB cables and connector connection down to two wires for high speed chip-to-chi

Numéro de référence : 066152504
Software 12 Nov 2019
DPOPWR Advanced Power Analysis Solution for DPO7000C, DPO-MSO5000, DPO-MSO5000B, DPO-DSA-MSO70000C, DPO-DSA70000D, MSO-DPO70000DX, DPO70000SX-Win7 - V10.1.2
Advanced Power Analysis measurement software for DPO7KC, DPO/MSO5K/5KB, DPO/DSA/MSO70000C, DPO/DSA70000D, DPO/DSA/MSO70000DX,DPO70000SX series for Windows 7, transforms a digital oscilloscope into a sophisticated analysis tool to design and debug SMP

Numéro de référence : 066170109
Software 12 Nov 2019
DPOJET-DPO7000-C, DPO-MSO5000-B, DPO-DSA-MSO70000C-D-DX, DPO70000SX - Win 7 - v10.0.5
The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key

Numéro de référence : 066164510
Software 12 Nov 2019
USBPWR - DPO-DSA-MSO5000, 5000B, 7000C and 70000C, D, DX - Win7 - V10.0.1
TekExpress USBPWR will develop and commercialize automated compliance measurements to the needs of EPS Power market segment. This EPS-power solution would be the first to market in mobile-USB-power compliance segment.

Numéro de référence : 066151905
Software 12 Nov 2019
USB2-DPO-DSA-MSO-5000-7000-70000-B,C,D,DX,SX - Win7, Win10 - v10.2.5
TekExpress USB2:<br> The Tektronix USB 2.0 compliance test application (Opt. USB2) and selected Tektronix oscilloscopes provide one button compliance testing for USB 2.0 devices, hosts and hubs as specified by the USB-IF. The USB software autom

Numéro de référence : 066166806
Software 12 Nov 2019
MOST Essentials - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 - DPO-MSO5000, DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C-D - Win7 V10.0.2
The Tektronix MOST Essentials Option provides design and validation engineers an easy and fast way to debug and perform compliance testing for MOST50 and MOST150 devices. MOST option installs: MOST Essentials DPOJET Plug-in MOST OS and US measurement

Numéro de référence : 066142807
Software 12 Nov 2019
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

Numéro de référence : 066093811
Software 12 Nov 2019
TekExpress D-PHY TX Automated Solution DPO7000-C, DPO-DSA-MSO70000-B-C-D - Win XP - Win7, V3.1.0
Tektronix TekExpress (TEKEXP) Automated Test Software is a Windows-based application that runs on any Windows XP or Windows7 computer operating system, including Tektronix Windows-based instruments.TekExpress software with Option D-PHYTX provides unm

Numéro de référence : 066152200
Software 12 Nov 2019
TekAUDIT - DPO7000C, DPO-MSO5000-B, DPO-DSA-MSO70000-C-D-DX - Win 7 - V10.5.4
TekAUDIT upgrades previously installed Tektronix software on Tektronix products. The software installed on the instrument can automatically be kept up to date as new software is released to the Web.

Numéro de référence : 066169913
Software 12 Nov 2019
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance sof

Numéro de référence : 066186008
Software 12 Nov 2019
TekExpress D-PHY TX Automated Solution Win7/Win10 - V10.0.2
TekExpress software with Option D-PHY TX provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.0 & v1.1 & v1.2 and the D-PHY co

Numéro de référence : 066189801
Software 12 Nov 2019
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC

Numéro de référence : 066133202
Software 12 Nov 2019
Tektronix MIPI DPOJET D-PHY Analysis Solution - DPO-DSA-MSO70000 - Win7 - V10.0.1
The Tektronix DPHY Analysis solution, Option provides Design and Validation Engineers an Easy and Fast Way to Debug and perform Compliance Testing for DPHY devices

Numéro de référence : 066190900
Software 12 Nov 2019
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical specifications tests. The compliance software

Numéro de référence : 066186016
Software 12 Nov 2019
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specifications tests. The compliance soft

Numéro de référence : 066186015
Software 12 Nov 2019
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - DPO-MSO 5000B-7000C-70000C-DX-SX - V10.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with fast

Numéro de référence : 066196756
Software 12 Nov 2019
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various

Numéro de référence : 066093809
Software 12 Nov 2019
TDSPTD - DPO7254-C, DPO7354-C, DPO-DSA-MSO70000-B-C - Win XP - Win 7
The Protocol Trigger and Decode (PTD) application enables you to decode and simultaneously display protocol-level information and physical layer signaling. The PTD application includes the following features:- Simultaneously view signal, characters,

Numéro de référence : 066063709
Software 12 Nov 2019
TDSUSB2 - DPO-MSO5000, DPO7000-C, DPO-DSA-MSO70000-B-C-D - WinXP - Win7, V4.0.0
The TDSUSB2 Universal Serial Bus Compliance Test Software is a software package that runs on the TDS5000/B, TDS6000/B/C, TDS7000/B, CSA7000/B, DPO/DSA7000/C, MSO/DPO5000 and MSO/DPO/DSA70000/B/C/D Series instruments. The solution performs signal qua

Numéro de référence : 066140005
Software 12 Nov 2019
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10
With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with fas

Numéro de référence : 066180101
Software 12 Nov 2019
TDSVNM CAN and LIN Timing and Protocol Decode Software, V3.1.3
The TDSVNM CAN and LIN Timing and Protocol Decode Software is a low speed serial bus test software program for CAN and LIN buses that run on Tektronix oscilloscopes. The software helps to decode CAN and LIN protocol messages simultaneously, set trigg

Numéro de référence : 066169801
Software 12 Nov 2019
Tektronix TEKScope IVI Driver, V3.9
The TekScope IVI Driver is an IVI class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver for an oscilloscope exports the API defined by the IviScope class

Numéro de référence : 066045315
Software 12 Nov 2019
TDSDVI - DPO-DSA-MSO5K-7K-70K-B-C-D-DX - WinXp, Win7, Version 3.0.11
DVI developers require a reliable and easy-to-use test tool to perform in-house compliance testing. The DVI Compliance Test Solution enables faster validation cycles with automatic pass-fail testing over a comprehensive range of tests for Transmitter

Numéro de référence : 066134302
Software 12 Nov 2019
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v10.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and e

Numéro de référence : 066196601
Software 12 Nov 2019
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v1.2.4
TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and e

Numéro de référence : 066196600
Software 12 Nov 2019
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.14.0013
SignalVu Vector Signal Analysis (ver 3.14) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179006
Software 12 Nov 2019
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - V3.23.0022
SignalVu Vector Signal Analysis (ver 3.23) runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179007
Software 12 Nov 2019
SignalVu - DPO7000C - DPO-DSA-MSO70000C - DPO-DSA70000D - DPO-MSO70000DX - DPO70000SX - DPO-MSO5000 - Win 7 - V3.9.0051
SignalVu Vector Signal Analysis runs as an option to the DPO7KC, DPO-DSA-MSO70KC, DPO-DSA70KD,DPO-MSO70KDX, DPO70000SX and DPO-MSO5K(64-bit systems) series scopes.

Numéro de référence : 066179005
Software 12 Nov 2019
REPORT GENERATOR V3.03.002-DPO7000,DPO7000C,DPO-MSO5000,DPO-DSA70000,DPO-DSA70000B,DPO-DSA70000C,MSO70000-C,TDS7000,TDS7000B,CSA7000,CSA7000B,TDS6000,TDS6000B,TDS6000C-WinXP-Win7 V3.03.002
The Report Generator enables the user to generate and print reports directly from the oscilloscope. It enhances the optional application capabilities by simplifying the process of creating and maintaining reports.The Report Generator automates the pr

Numéro de référence : 066077407
Software 12 Nov 2019
HDMI2.1-eARC _v10.0.0
The Tektronix TekExpress eARC is an automated test solution for testing Enhance Audio Return Channel for 13 electrical Transmitter and 10 electrical Receiver measurements.

Numéro de référence : 066202300
Software 12 Nov 2019
Application Development Kit DPO-MSO5K, DPO7KC, DPO-DSA-MSO70KC,D,DX Win7 V1.2.0
The Application Developer Kit (ADK) provides tools for scope users and third parties to create custom applications for Tektronix scopes. ADK provides developers fast access to waveform data, the ability to add measurements and to develop well int

Numéro de référence : 066142101
Software 12 Nov 2019
Using FastFrame™ Segmented Memory
This application note explains how to use FastFrame(TM) Segmented Memory feature to capture signal bursts or data packets without using memory to capture unimportant dead time.  This application note applies to the following series of oscilloscopes:

Numéro du document : 55W-12112-2
Note d’application 12 Nov 2019
Understanding and Performing MIPI M-PHY Physical and Protocol Layer Testing
Review this application note for background and how to perform MIPI M-PHY testing, including Transmitter configurations and testing challenges, different signal generation requirements for Receiver testing, design validation, M-PHY protocol testing a

Numéro du document : 55W-28277-0
Note d’application 12 Nov 2019
Triggering Fundamentals With Pinpoint® Triggering and Event Search & Mark for DPO7000
This document discusses the fundamentals of triggering and how Pinpoint triggering and Search and Mark takes triggering in real-time oscilloscopes to new levels of productivity.

Numéro du document : 55W-17291-6
Guide de présentation 12 Nov 2019
Simplifying DC-DC Converter Characterization with a Series 2600B System SourceMeter SMU Instrument and an MSO/DPO5000 or DPO7000 Series Scope
Learn about techniques for precisely characterizing a DC-to-DC converter using a source/measure unit, including: Efficiency Load regulation Line regulation  Techniques for using an oscilloscope to measure turn-on time and performing spectral analy

Numéro du document : 1KW-60105-2
Note d’application 12 Nov 2019
Windows 7 Ultimate 64 Bit SP1 Operating System Recovery
This document instructs how to restore the instrument operating system.

Numéro du document : 55W-29757-0
Guide de présentation 12 Nov 2019
Tektronix Launches TekScope Anywhere to Improve Collaboration, Boost Productivity
New Software Solution Extends Visualization, Analysis and Reporting Capabilities of Tektronix Oscilloscopes to PCs, TabletsBEAVERTON, Ore., Jan. 27, 2015 - Tektronix, Inc., the world's leading manufacturer of oscilloscopes, today announced TekScope A
Actualité 12 Nov 2019