MSO58LP
Télécharger
Télécharger
Télécharger des manuels, des fiches techniques, des logiciels, etc. :
Contactez-nous
Contactez-nous
Chat en direct avec un représentant Tek. Service disponible de 8 h 30 à 5 h 30, CEST.
Le MSO profil bas de Série 5
Dans les applications requérant une densité de voies très élevée, le MSO profil bas série 5 définit un nouveau standard de performance. Avec des convertisseurs analogiques numériques 12 bits, ce numériseur haute vitesse compact offre 8 voies d'entrée (et une voie de déclenchement AUX) et une hauteur réduite de 8,9 cm (2U).
Bande passante
1 GHz
Voies analogiques
8
Voies numériques
Jusqu’à 64 (en option)
Longueur d'enregistrement
125 millions de points
Bénéficiez de plus d’instruments pour votre expérience sans ajout de baies
Remplacez vos oscilloscopes et bénéficiez de 6 fois plus de voies dans votre montage en baie existant. Le MSO LP de Série 5 propose 8 voies et une entrée de déclenchement auxiliaire dans un instrument compact de dimension 2U qui affiche un coût par voie faible. Chacune des 8 entrées FlexChannel™ peuvent être utilisées comme une voie analogique ou 8 voies numériques.
Capture haute fidélité et données haute qualité
Avec une bande passante analogique de 1 GHz, des fréquences d’échantillonnage atteignant 6,25 G éch./s sur toutes les voies, une longueur d’enregistrement de 125 millions de points, l’oscilloscope MSO profil bas de Série 5 offre les performances dont vous avez besoin pour capturer des données précises de signaux avec la meilleure intégrité possible.
Observez plus de détails du signal que jamais grâce à la résolution verticale de 12 bits et un nombre de bits effectifs de 7,6 bits à 1 GHz
Tek49
Des convertisseurs analogique-numérique 12 bits offrent une résolution verticale 16 fois supérieure à celle des convertisseurs traditionnels 8 bits. Mesurez les détails des petits signaux, même s’ils se superposent à des signaux de plus grande amplitude.
Passez de la conception au test de fabrication sans effort
Facilitez-vous la tâche en utilisant exactement le logiciel et les routines de test que vous avez développés durant la conception pour la production. Utilisez le MSO Série 5 sur banc, avec son écran HD de 15,6 pouces (39,6 cm) et son écran tactile permettant de zoomer par pincement et balayage pour la validation de la conception. Puis exécutez exactement les mêmes tests en utilisant la version compacte faible hauteur en fabrication.
| Modèle | Bande passante | Fréquence d'échantillonnage | Longueur d'enregistrement | Voies analogiques | Voies numériques | Tarif |
|---|---|---|---|---|---|---|
| MSO58LP | 1 GHz |
6.25 GS/s |
125 Mpoints |
8 |
Up to 64 (optional) |
Configuration et devis |
| Modèle | Bande passante | Fréquence d'échantillonnage | Longueur d'enregistrement | Voies analogiques | Voies numériques | Tarif |
|---|---|---|---|---|---|---|
| MSO58LP | 1 GHz |
6.25 GS/s |
125 Mpoints |
8 |
Up to 64 (optional) |
Configuration et devis |
Propriétés physiques à puissance élevée
Les applications de mesure d’impulsions capturent les événements brefs qui représentent le monde des particules physiques. Elles requièrent l’acquisition de nombreux signaux avec une plage dynamique élevée dans des environnements physiques exigeants. Le MSO profil bas de Série 5 offre une densité de voies 6 fois supérieure à celle des oscilloscopes de banc traditionnels et des performances exceptionnelles qui permettent de recueillir des données de test précises et fiables.
Points forts
- Convertisseurs analogiques-numériques 12 bits
- Nombre de bits effectifs de 7,6 à 1 GHz
- La longueur d’enregistrement de 125 millions de points permet jusqu’à 20 ms de temps d’acquisition à 6,25 G éch/s
- Hauteur de 2 unités de rack (3,5 pouces)
Systèmes de test automatique
Les systèmes de test automatiques requièrent des capacité de programmation robustes et sont souvent soumis aux contraintes d’encombrement associées aux racks. L’oscilloscope MSO profil bas de Série 5 intègre 8 entrées dans un volume de 2 unités de rack et est livré prêt à être installé. Chaque entrée peut être utilisée comme une voie analogique de précision ou 8 voies numériques. En outre, vous pouvez développer des tests sur le MSO de Série 5 grâce à son écran de 15,6 pouces (39,6 cm) pour valider des conceptions. Ce programme peut être réutilisé sur la version profil bas en production.
Points forts
- 8 entrées FlexChannel et une entrée de déclenchement auxiliaire
- Hauteur de 2 unités de rack (3,5 pouces) avec montage en baie
- Ethernet LAN 10/100/1000 pour une communication simple
- Port périphérique USB 3.0 pour une communication rapide
| Tektronix MSO profil bas série 5 |
Tektronix MSO série 5 |
Keysight Série S |
Keysight M9243A |
National Instruments PXIe-5162 |
|
|---|---|---|---|---|---|
| Bande passante | 1 GHz | 350 MHz à 2 GHz | 500 MHz à 8 GHz | 1 GHz | 1,5 GHz |
| Voies analogiques | 8 | 4, 6, ou 8 | 4 | 2 | 2 |
| Fréquence d’échantillonnage analogique (toutes voies) | Jusqu’à 6,25 G éch/s | Jusqu’à 6,25 G éch/s | Jusqu'à 10 G éch./s | Jusqu'à 2,5 G éch./s | Jusqu'à 2,5 G éch./s |
| Hauteur (unités de rack) | 2U | 7U | 7U | 3U | 4U |
| Résolution A/D | 12 bits | 12 bits | 10 bits | 8 bits | 10 bits |
| Nombre de bits effectifs (système à 1 GHz) | 7,6 bits | 7,6 bits | 7,8 bits | Non spécifié | 6,6 bits |
| Longueur d’enregistrement standard (toutes voies) | 125 millions de points | 62,5 millions de points | 50 millions de points | 2 millions de points | 16 millions de points |
| Générateur de fonctions arbitraires intégré | 50 MHz (en option) | 50 MHz (en option) | - | - | - |
| Voies numériques (MSO) | Jusqu’à 64 (en option) | Jusqu’à 64 (en option) | 16 (en option) | - | - |
| Système d’exploitation | Linux fermé | Linux fermé Configuration ouverte Windows 10 (en option) |
Configuration ouverte Windows 7 | Windows 7 | Fermé Configuration ouverte Windows 10 |
| Fiche technique | Package logiciel / Option logicielle | Description | Configuration et devis |
|---|
Accéder aux voies numériques
| Mise à niveau | Description | Détails d’achat |
|---|---|---|
| Sonde logique TLP058 | Pour tous les MSO de Série 5, chaque sonde accède à 8 voies numériques sur chaque FlexChannel | Demander un devis pour cette sonde |
Ajouter des fonctions à l’instrument
| Mise à niveau | Description | Détails d’achat |
|---|---|---|
| SUP5-AFG | Ajouter un générateur de fonctions arbitraires | Demander une licence d'essai Demander un devis |
| SUP5-DVM | Ajouter un voltmètre numérique et un compteur de fréquences de déclenchement | Fichier de licence pour mise à niveau du logiciel fourni après l'inscription. Inscrivez-vous dès maintenant. |
Ajouter une analyse de protocole
| Mise à niveau | Description | Détails d’achat |
|---|---|---|
| SUP5-SR8B10B | Recherche et décodage de protocole 8b10b | Demander une licence d'essai Demander un devis |
| SUP5-SRAERO | Déclenchement et analyse série pour l’industrie aérospatiale (MIL-STD-1553, ARINC429) | Demander une licence d'essai Demander un devis |
| SUP5-SRAUDIO | Déclenchement et analyse série audio (I2S, LJ, RJ, TDM) | Demander une licence d'essai Demander un devis |
| SUP5-SRAUTO | Déclenchement et analyse série pour l’automobile (CAN, CAN FD, LIN, FlexRay) | Demander une licence d'essai Demander un devis |
| SUP5-SRAUTOEN1 | Logiciel de décodage de protocole Ethernet automobile 100BASE-T1 | Demander une licence d'essai Demander un devis |
| SUP5-SRAUTOSEN | Analyse et déclenchement série pour capteur automobile (SENT) | Demander une licence d'essai Demander un devis |
| SUP5-SRCOMP | Déclenchement et analyse série sur ordinateur (RS-232/422/485/UART) | Demander une licence d'essai Demander un devis |
| SUP5-SREMBD | Déclenchement et analyse série embarqué (I2C, SPI) | Demander une licence d'essai Demander un devis |
| SUP5-SRENET | Déclenchement et analyse série Ethernet (10Base-T, 100Base-TX) | Demander une licence d'essai Demander un devis |
| SUP5-SRI3C | Décodage et analyse MIPI I3C | Demander une licence d'essai Demander un devis |
| SUP5-SRNRZ | Recherche et décodage de protocole NRZ | Demander une licence d'essai Demander un devis |
| SUP5-SRPM | Analyse et déclenchement en série de la gestion de l'alimentation (SPMI) | Demander une licence d'essai Demander un devis |
| SUP5-SRPSI5 | Analyse et décodage de série PSI5 | Demander une licence d'essai Demander un devis |
| SUP5-SRSPACEWIRE | Analyse et décodage du protocole SpaceWire | Demander une licence d'essai Demander un devis |
| SUP5-SRUSB2 | Déclenchement et analyse série USB2.0 (LS, FS, HS) | Demander une licence d'essai Demander un devis |
Ajouter l’analyse avancée
| Mise à niveau | Description | Détails d’achat |
|---|---|---|
| SUP5-DPM | Solution complète d’analyse et de débogage Digital Power Management (comprend toutes les mesures en DPMBAS, ainsi que l’analyse de la gigue et l’analyse du diagramme de l’œil) | Demander une licence d'essai Demander un devis |
| SUP5-DJA | Analyses avancées de la gigue et de l’œil | Demander une licence d'essai Demander un devis |
| SUP5-IMDA | Analyse des onduleurs, moteurs et entraînements | Demander une licence d'essai Demander un devis |
| SUP5-MTM | Test de masques et de valeurs limites | Demander une licence d'essai Demander un devis |
| SUP5-PWR | Analyse de puissance | Demander une licence d'essai Demander un devis |
| SUP5-SV-BW-1 | Analyses avancées de la gigue et de l’œil | Demander une licence d'essai Demander un devis |
| SUP5-SV-RFVT | Analyse du spectre RF par rapport au temps | Demander une licence d'essai Demander un devis |
| SUP5-VID | Déclencheur vidéo analogique (NTSC, PAL, SECAM) | Demander une licence d'essai Demander un devis |
|
Solutions for Aerospace and Defense
Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.
Numéro du document : 46A-61169-2 |
Brochure | |
|
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces …
Numéro du document : 37W-23378-4 |
Note d’application | |
|
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM. Find out how to use the protocol trigger, decode and search capabilities …
Numéro du document : 48W-19040-21 |
Note d’application | |
|
Measuring Digital Clock Stability and Jitter with an Oscilloscope
This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency …
Numéro du document : 48W-61379-1 |
Note d’application | |
|
My Tektronix oscilloscope uses the Linux operating system. Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
|
Numéro de la FAQ64866 | |
|
After I place an order for a software-license or an upgrade for my 5 or 6 Series MSO, how do I get and install the software license or the upgrade license?
After you place an order for the software license or an upgrade for your 5 or 6 Series MSO, you will receive an email (at the email address in your MyTek account). It will look about like this, but customized for you:
Dear Customer …
|
Numéro de la FAQ235451 | |
|
Does my 5 or 6 Series MSO support multiple displays?
Yes, the 5 and 6 Series MSO hardware supports a total of three displays, including the instrument’s internal display. The instrument provides DVI-D, Display Port, and VGA connectors on the rear panel.
The standard instrument (running the Linux …
|
Numéro de la FAQ250721 | |
|
How do I remotely control my 5 or 6 Series MSO from my computer, easily and without any programming?
For the standard instrument (without the Windows 10 option installed), you can simply connect your computer to the instrument through Ethernet and control the oscilloscope with your favorite browser.
Find the instrument’s IP address by selecting …
|
Numéro de la FAQ474201 | |
|
How do I switch between stacked and overlay display modes on the MSO5 Series?
Double click anywhere in the waveform view screen. A wave form menu will appear. Under display mode you can pick between overlay or stacked modes.
|
Numéro de la FAQ474261 | |
|
I saw a warning message when recalling an instrument setup on my 5 or 6 Series MSO. What caused it?
The 5 and 6 Series MSO will display a pop-up warning message when it is not completely successful recalling the saved state of the instrument with a setup or session file.
The following message will appear on the display:
WARNING
The oscilloscope …
|
Numéro de la FAQ235416 | |
|
How can I invert the channel on the 5 or 6 series MSO?
With firmware v1.16, the invert function is available in the channel menu.
If the unit has the older firmware v1.14 or below, the invert channel feature on the 5 or 6 series MSO is supported via the math channel instead.
Here is the setup …
|
Numéro de la FAQ723956 | |
|
Where can I find the positive/negative pulse count auto measurement on the 5/6 Series MSO?
Currently, there is no auto measurement for the positive or negative pulse count on the 5/6 Series MSO.
The workaround would be using the “Search” feature to search for the pulse width.
First, set up for the positive pulse width auto …
|
Numéro de la FAQ773396 | |
|
What probe interface does my oscilloscope have?
Oscilloscope series
Probe interface
CSA7000/CSA7000B
TekConnect
DPO2000
TekVPI
DPO3000
…
|
Numéro de la FAQ64251 | |
|
How can I ungroup the channel badge on the 5/6 Series MSO?
On firmware v1.12 or above, the 5/6 Series MSO added the stacked and overlay mode mix and match feature. It allows user to group multiple channels for overlay mode for easy comparison.
To separate the channels in the group, there are couple options …
|
Numéro de la FAQ773401 | |
|
I received the following message about my floating license:
(This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.)
Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out. After it reaches selected duration, it will automatically check …
|
Numéro de la FAQ467516 | |
|
Where can I locate the visual trigger setup on the 5 or 6 series MSO?
The visual trigger option is not listed in the trigger type selection initially. To setup the visual trigger, simply click on the "DRAW A BOX" icon (located in the lower right corner of the display) to draw the areas for the visual trigger. After …
|
Numéro de la FAQ723951 | |
|
What rackmount does my scope use?
Oscilloscope Family
Rackmount
TDS1000/TDS2000
RM2000
TDS1000B/TDS2000B/TDS2000C
RM2000B
TPS2000/TPS2000B
No Rackmount - Strap hanger 343-1689 …
|
Numéro de la FAQ64571 | |
|
Could the number of analog channel be upgraded on the 5 series MSO?
No. The analog channel count is fixed at the initial purchase.
|
Numéro de la FAQ468131 | |
|
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update
By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates. To ensure Windows 10 receives all available …
|
Numéro de la FAQ782296 | |
|
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications.
Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
|
Numéro de la FAQ69266 | |
|
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.
Prerequisites
1. PC equipped with Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
|
Numéro de la FAQ474266 | |
|
What is the range of the logic threshold supported on the 5 and 6 Series MSO?
The logic threshold can be set between +/-40V with the TLP058 logic probe. Each individual digital channel can be set for its own threshold level.
|
Numéro de la FAQ468126 | |
|
What are some of the advantages of the 5 and 6 Series MSO digital trigger?
Since its invention by Tektronix in the 1940s, the oscilloscope’s trigger system has been a key component of the products, providing a stable display of repetitive signals and the capture of specific events in a signal. At the circuit level, the …
|
Numéro de la FAQ467411 | |
|
Can multiple auto measurements be removed at once on the 5 series MSO?
No. Currently, the user interface does not allow to remove all auto measurements at once. The closest workaround will be recalling the default setup.
|
Numéro de la FAQ474036 | |
|
What does “Probe Dynamic Range” mean and how does the 5 and 6 Series MSO indicate it?
Oscilloscope probes which contain active circuitry, especially with amplifiers in the signal path, have a limited dynamic range over which the probe behaves linearly. When input signals exceed this range, the signal may be distorted. (Such probes …
|
Numéro de la FAQ474196 | |
|
Is BUS trigger mode supported in the AB sequence trigger mode on the 5 series MSO?
Yes. However, it does not apply to both events. It could be only either A or B event for the bus trigger. The second event is locked to edge trigger type.
|
Numéro de la FAQ474026 | |
|
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607). You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
|
Numéro de la FAQ782291 | |
|
I recently registered our Tektronix oscilloscope, updated the firmware and am currently trying to activate the free DVM & Frequency Counter. I don’t see any software downloads for activating the DVM. Am I doing something wrong, or looking in the wrong spot?
After you have registered your oscilloscope on Tek.com, you should have received an email with instructions. The email is sent to the address you used to login to tek.com. If you haven't received the email after registration:
Check your spam …
|
Numéro de la FAQ468046 | |
|
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
|
Numéro de la FAQ471231 | |
|
What is the deskew range and resolution between channels for the 5 or 6 series MSO?
Both 5 and 6 series MSO support a deskew range of -125ns to +125ns.
The 6 series MSO can be adjusted in 1ps resolution for all acquisition modes except Peak Detect and Envelope (40ps resolution).
The 5 series MSO can be adjusted in 40ps resolution …
|
Numéro de la FAQ723961 | |
|
How do I save and transfer a screenshot from the 4, 5 or 6 Series MSO oscilloscope to my PC via the remote command interface?
Screenshots (also known as hard copies) can be transferred from the Series 4, 5 and 6 MSO oscilloscopes via the remote programming interface using just a few simple commands. For information on how to send commands to the instrument via the remote …
|
Numéro de la FAQ245436 | |
|
Can I mount a network drive on my standard (non-Windows) 5 or 6 Series MSO? How could I use this capability?
The oscilloscope has a built-in m.2 drive, labeled C:. This drive can be used to store waveforms, setups, and measurement results. However, this drive is not easily accessible to your computer.
The oscilloscope also has several USB ports to support …
|
Numéro de la FAQ474191 | |
|
What optional features are available as upgrades for my 5 Series MSO and how do I get the upgrade?
Most optional, factory-installed features for the 5 Series MSO are also available as field upgrades, and are installed simply by ordering an upgrade product and entering a new, node-locked software license into the instrument.
There are several …
|
Numéro de la FAQ235421 | |
|
How can I try out optional features for my 5 Series MSO before I buy them?
Most field upgrades for the optional features for the 5 Series MSO are also available for a one-time, 30-day free trial. These are available simply by requesting a trial software license and installing the node-locked license in the instrument …
|
Numéro de la FAQ235426 | |
|
Where can I locate the save on trigger feature on the 5 series MSO?
It is in the “Acquisition” badge located in the lower right corner of the screen. It allows the user to set the configuration to save the waveform file or screen capture when there is a triggered event.
|
Numéro de la FAQ474041 | |
|
How many digital channels are supported on the 5 and 6 Series MSO?
Each analog channel on the 5 and 6 Series MSO can be converted into 8 digital channels with the logic probe TLP058.
For a 4-channel model (MSO54, MSO64), it is up to 32 digital channels.
For a 6-channel model (MSO56), it is up to 48 digital channels …
|
Numéro de la FAQ468121 | |
|
How are 5 and 6 Series MSO setup files and session files different? How should I use them?
The 5 and 6 Series MSO setup files contain all instrument settings, user-configured analysis, and reference waveforms, so they provide an easy way to return the oscilloscope to a known state. For example, if you want to build a library of …
|
Numéro de la FAQ235446 | |
|
How do I set up a network drive on my 5 Series MSO or 6 Series MSO?
Introduction
Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs. This feature allows you to specify a directory on another computer for the scope to use as storage. To access this storage …
|
Numéro de la FAQ773296 | |
|
Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical layer and packet structures of the I3C protocol. It …
Numéro du document : 48W-61676-0 |
Note d’application | |
|
How to Troubleshoot System Problems Using an Oscilloscope with I2C and SPI Decoding
Learn about the physical layers of the most common interchip buses - I2C and SPI - to enable you to troubleshoot bus problems or system issues. Learn how to set up and interpret the results when you use automated decoding, triggering, and search on …
Numéro du document : 55W-61091-1 |
Note d’application | |
|
5 Series MSO Low Profile
Numéro du document : 48W-61275-12 |
Datasheet | |
|
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.22.x. Numéro de référence : 077130310 |
Utilisateur principal | |
|
5 Series MSO (MSO54, MSO56, MSO58, MSO58LP)
Specifications and Performance Verification
For firmware version 1.4 and above. This document contains the specifications and performance verification procedures for the instruments. Numéro de référence : 077130605 |
Vérification des performances | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.22.x. Numéro de référence : 077130509 |
Programmation | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.20.x. Numéro de référence : 077130508 |
Programmation | |
|
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
Revision A: This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.16.x. Numéro de référence : 077130507 |
Programmation | |
|
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help
This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.20.x. Numéro de référence : 077130308 |
Utilisateur principal | |
|
5 Series Low Profile Oscilloscope, 6 Series Low Profile Digitizer
MSO58LP, LPD64 Bench Conversion Kit
This kit is a collection of parts that, once installed, configures the MSO58LP or LPD64 from a rack mount instrument to a stackable benchtop instrument. Numéro de référence : 075110201 |
Instructions d’installation sur site | |
|
4/5/6 Series MSO Option License
Install Instructions
This document describes how to install optional upgrade licenses to add new functions or features to 4/5/6 Series MSO instruments (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64). Numéro de référence : 071351902 |
Instructions d’installation sur site | |
|
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.14. Numéro de référence : 077130506 |
Programmation | |
|
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.12. Numéro de référence : 077130505 |
Programmation | |
|
5/6 Series MSO MSO5, MSO56, MSO58, MSO58LP, MSO64
Install Upgrade Options
This document describes how to install optional upgrade licenses to add new functions or features to 5/6 Series MSO instruments (MSO54, MSO56, MSO58, MSO58LP, MSO64). Numéro de référence : 071351901 |
Instructions d’installation sur site | |
|
5 Series MSO Low Profile
MSO58LP Installation and Safety
This manual describes installing and setting up the 5 Series MSO58LP oscilloscope, and introduces basic oscilloscope operations. Numéro de référence : 071356801 |
Utilisateur principal | |
|
5 Series MSO (non-Windows) Firmware - V1.24.9
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
Numéro de référence : 066196409 |
Firmware | |
|
5 Series MSO (non-Windows) Firmware - V1.22.4
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
Numéro de référence : 066196407 |
Firmware | |
|
4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI …
Numéro de référence : 066192807 |
Pilote | |
|
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …
Numéro de référence : 066093812 |
Pilote | |
|
4, 5 and 6 Series Mixed Signal Oscilloscope IVI-COM Driver - V1.5.0
The TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes is an IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver …
Numéro de référence : 066192806 |
Pilote | |
|
5 Series MSO (non-Windows) Firmware - V1.16.6
Download this firmware to install the latest updates for the 5 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 5-WIN (Windows 10) installed.
Numéro de référence : 066196405 |
Firmware | |
|
5 Series MSO Low Profile 3D CAD Files - V1.0
3D CAD files containing all exterior surfaces for standard rack mount configuration. STEP and IGES file formats included.
Numéro de référence : 066195100 |
Utilitaires | |
|
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions. This application note:
Provides a quick review of practical inductor and transformer theory, especially related to power supply …
Numéro du document : 55W-61401-2 |
Note d’application | |
|
Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply …
Numéro du document : 48W-61452-0 |
Dossier technique | |
|
Using FastFrame Segmented Memory on the 4/5/6 Series MSO
Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on …
Numéro du document : 55W-61299-2 |
Dossier technique | |
|
Tek049 ASIC Powers Next-Generation Oscilloscopes
The Tek049 is a new mixed-signal oscilloscope ASIC. It consists of 400 million transistors which make up its high-speed, precision ADCs and integrated DSP. The Tek049 recently debuted as the powerhouse behind Tek’s new 5 Series MSO and will power …
Numéro du document : 55W-61320-0 |
Livre blanc | |
|
Power Supply Measurement and Analysis with 4/5/6-PWR Application Software
Optimizing and validating a bench power supply design requires a number of important measurements. These include:
Line-side power quality measurements, such as power factor, inrush current, and harmonics
Switching device measurements, such as …
Numéro du document : 55W-61294-3 |
Note d’application | |
|
Troubleshooting USB 2.0 Problems with Your Oscilloscope
Learn the basics of the USB 2.0 physical layer to help you troubleshoot bus problems or system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscilloscope equipped with USB 2.0 bus …
Numéro du document : 55W-61092-1 |
Note d’application | |
|
Getting Started with Power Rail Measurements Application Note
No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling …
Numéro du document : 51W-61562-0 |
Note d’application | |
|
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …
Numéro du document : 60W_14232_10 |
Guide de sélection de produit | |
|
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …
Numéro du document : 46W-31080-7 |
Guide de sélection | |
|
Debugging SENT Automotive Buses with an Oscilloscope
The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult …
Numéro du document : 55W-61326-1 |
Note d’application | |
|
Troubleshooting Multiple-bus Systems Using FlexChannel Input Channels Tech Brief
Troubleshooting embedded systems with multiple processors, sensors, actuators, communications and human interfaces, often demands more than the 2 or 4 measurement channels available on most oscilloscopes. More channels can help up to a point, but a …
Numéro du document : 55W-61100-2 |
Dossier technique | |
|
Debugging CAN, LIN and FlexRay Automotive Buses with an Oscilloscope
Explains the physical layer basics of common automotive buses - CAN, LIN, and FlexRay - to enable you to troubleshoot bus problems or system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search …
Numéro du document : 55W-61098-3 |
Note d’application | |
|
Debugging SPMI Power Management Buses with an Oscilloscope
Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at …
Numéro du document : 48W-61436-0 |
Note d’application | |
|
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …
Numéro du document : 55W-61093-1 |
Note d’application | |
|
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.
Numéro du document : 55W-29028-13 |
Guide de sélection | |
|
Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
Spectrum View is a new way of performing spectrum analysis on an oscilloscope. This application note shows and explains how Spectrum View operates and how it differs from traditional oscilloscope FFT functions.
Any analog signal may be presented as …
Numéro du document : 48W-61563-1 |
Note d’application | |
|
5 Series MSO Low Profile with Option 5-SEC Enhanced Security
Declassification and Security
This document describes how to clear or sanitize the 5 Series MSO Low Profile (MSO58LP) that has option 5-SEC Enhanced Security installed, to allow removal from a secured area, or returning the instrument for repair from a secured area. Numéro de référence : 077140700 |
Déclassification |