MIPI

Tektronix propose aux concepteurs MIPI, par exemple ceux qui travaillent sur les systèmes de conduite autonome, les systèmes multimédias embarqués ou sur d’autres appareils mobiles, toute une gamme de solutions de test pour les composants physiques MIPI (émetteur, récepteur et protocole) pour M-PHY, D-PHY et C-PHY. Ces solutions suivent les évolutions rapides des normes MIPI, proposant ainsi à ces concepteurs des solutions de test pérennes afin de pouvoir commercialiser les produits qu’ils développent.

NOUVEAU ! La première solution de test de récepteurs du marché avec une couverture à 100 % de la nouvelle spécification D-PHY v.2.0 de la MIPI Alliance, avec prise en charge complète des spécifications de test de récepteur C-PHY v1.1.

Test des émetteurs et des récepteurs avec les oscilloscopes, les générateurs de formes d’onde arbitraires, les BERT et les logiciels Tektronix

Appelez-nous au : téléphone or try Live Chat
Pour commencer la configuration de votre solution,
Ajouter à la sélection

Imprimer la configuration

Configuration du courrier électronique

Demander un devis

Enter email:

Send

Please enter a valid email address.

Your email has been sent.

Your quote has been requested.

  • Reset

Bibliothèque

Title
Oscilloscope Probing for MIPI M-PHY TX Measurements

This application note reviews the requirements of the M-PHY standard that relate to oscilloscope probing, discusses tests required in the M-PHY Physical Layer Conformance Test Suite (CTS), and provides practical examples of M-PHY probing with currently available oscilloscopes and probes.

Understanding and Characterizing Timing Jitter Primer

Timing jitter is the unwelcome companion of all electrical systems that use voltage transitions to represent timing information. This paper focuses primarily on jitter in electrical systems.

Triggering Fundamentals With Pinpoint® Triggering and Event Search & Mark for DPO7000

This document discusses some fundamentals of triggering, and how Pinpoint triggering takes triggering in real-time oscilloscopes to a new level.

The Basics of Serial Data Compliance and Validation Measurements

This primer is designed to help you understand the common aspects of serial data transmission & to explain the analog and digital measurement requirements that apply to these emerging serial technologies

Probing Tips for High Performance Design and Measurement

Learn how to identify common signal integrity problems experienced in high speed and mobile designs, modeling techniques used to study and de-embed the effects of probing, probing considerations for low power circuits and much more in this detailed application note for high performance designs.

Understanding and Performing MIPI M-PHY Physical and Protocol Layer Testing

Review this application note for background and how to perform MIPI M-PHY testing, including Transmitter configurations and testing challenges, different signal generation requirements for Receiver testing, design validation, M-PHY protocol testing and more.

Debugging Serial Buses in Embedded System Designs

Learn the basics of the hardware protocols of the most common serial buses. Find out how to use the protocol trigger, decode and search capabilities of oscilloscopes to solve serial bus integration and debug challenges.

TekExpress Software and MIPI® Physical Layer and Protocol Layer Testing

Understanding and performing MIPI® D-PHY physical layer, CSI and DSI protocol layer testing with Tektronix TekExpress software and oscilloscopes.

The Tektronix P7700 TriMode Probe supports solder connections to a device under…

5:58

The NEW P7700 Series TriMode Probe provides the highest probe fidelity available…

0:54

This webinar provides insight into the future of mobile device design and test,…

54:10
Titre
Demystify MIPI D-PHY and C-PHY Transmitter and Receiver Physical Layer Test

During this webinar, you'll gain an understanding of MIPI test challenges for both MIPI high-speed physical layers and useful tips and technical insights into characterizing and validating design compliance.

How to Design Longer Battery Life in Mobile Computing Devices

This Tektronix Webinar discusses current monitoring over time to assess a semiconductor system's power performance with an emphasis on higher accuracy. In this 35 minute instructional webinar, engineers can learn how to validate a semiconductor's ability to preserve as much battery life as possible when placed in mobile computing devices.

Additional product info: 2400 Series SMU's  and  2300 Series DC Power Supplies

HDMI 2.0 Webinar

Development & Testing of Next Generation HDMI Interfaces.

PHY Layer Testing for MIPI DPHY & MPHY Bus Compliance

Learn how to setup and perform verification and debug tests on the electrical PHY Layer for DPHY and MPHY serial interconnects as specified by the MIPI Alliance for mobile device designs.

Title
MIPI C-PHY Receiver Conformance Test MOI Ver 1.2
MIPI D-PHY Test Method of Implementation (MOI)

Methods of Implementation (MOI) for Verification, Debug, Characterization, Compliance and Interoperability Test

MIPI® M-PHY Methods of Implementation

MIPI® M-PHY* Measurements & Setup Library, Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test

Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top