Télécharger
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

TLA7000

Le TLA7000 n'est plus disponible à la vente. Les produits Tektronix MSO série 5 et série 6 sont les produits de remplacement recommandés. Pour plus d'informations sur ces produits, consultez les pages www.tek.com/oscilloscope/5-series-mso-mixed-signal-oscilloscope et www.tek.com/oscilloscope/6-series-mso-mixed-signal-oscilloscope.

L’Analyseur Logique modulaire TLA7000 offre la rapidité et la flexibilité dont vous avez besoin pour capturer les détails logiques sur les conceptions de mémoire et de microprocesseur actuelles les plus rapides. Identifiez la source des erreurs habituellement insaisissables et bénéficiez d’une visibilité accrue grâce à des écrans larges, parfaitement lisibles, des débits de données plus élevés et des vues à corrélation temporelle sur les signaux analogiques et numérique, et ce via la même sonde.

Caractéristiques

Gains

Acquisition MagniVu™ Ne laissez plus aucun événement passer inaperçu en mode d’acquisition synchrone ou asynchrone, grâce à une résolution d’échantillonnage élevée (jusqu’à 20 ps) sur toutes les voies.
Multiplexage iCapture™ Éliminez les équipements redondants avec une acquisition numérique et analogique simultanée, effectuée sur une sonde d’analyseur logique unique.
Identification des parasites Évitez d’avoir à rechercher manuellement chaque voie, grâce à la capacité d’affichage exclusive, qui indique à la fois l’heure et la voie où le parasite s’est produit.
Déclenchement de violation TS/TH Éliminez la tâche de surveillance longue et complexe des sorties de circuit, avec la fonction de déclenchement de violation en temps réel, qui effectue automatiquement l’acquisition des violations de maintien et de configuration intermittentes.
Écran iView™ Bénéficiez d’une visibilité totale du système grâce à des données numériques et analogiques intégrées, avec mise en corrélation temporelle, sur un seul écran.
Analyse iVerify™ Identifiez rapidement les problèmes d'intégrité du signal grâce à l’analyse de bus multi-voie, effectuée à l’aide d’un diagramme de l’œil généré par un oscilloscope.
Mesures automatisées Synthétisez facilement les performances de votre conception à l’aide de mesures sophistiquées : fréquence, période, largeur d’impulsion, rapport cyclique et nombre de fronts.
Déclenchement Glisser-Déposer Isolez rapidement les événements grâce à une configuration simple et intuitive du déclenchement. Les déclenchements proposés incluent : front de voie, valeur de voie, valeur de bus, valeur multi-groupe, parasite, violation de configuration et de maintien ou déclenchement sur tout événement.
In this tutorial we will examine ways to improve productivity in embedded system validation and debug. Part I focuses on what can be done in the early design cycle to improve productivity. Part II …
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets – computers, cell phones, entertainment systems …

Numéro du document : 55C-16736-3
Guide de présentation
The installation manual for TLA Application Software v5.1 says that I may need to update the bridge driver. How do I know if I need to or not?
If you are upgrading from v4.0 to v4.4 to v5.1, then you need to upgrade the bridge driver. If you have v5.0, then it will be upgraded automatically when you install v5.1.
Numéro de la FAQ55996
What is the delay of a signal out from a TLA7000 series mainframe to a scope?
This data will be published in spring 2006.
Numéro de la FAQ56926
Is there an adapter for connecting my connectorless compression (P6860+ P6880+ P6864+ P6419) probes to the Agilent E5378A or E5379A probe footprint?
Yes, Nexus makes adapters for connecting Tektronix P6860, P6880 and P6419 probes to Agilent probe footprints. There are different models of NEX-SAMXX adapters for both single-ended and differential probes. Please visit Nexus for details.
Numéro de la FAQ55901
How many trigger resources can be used in a single trigger program?
A trigger program is made up of one or more states up to 16. Only one state is active at a time. Each state is made up of one or more clauses. If you use more than four trigger event resources in a state, you can have up to four clauses per state …
Numéro de la FAQ60786
My trigger program will not stop running. Why will it not trigger?
Check the status monitor to see if the program is stuck in an undesired state. Check to see if the program has triggered or reached the trigger state. Remember, a trigger program must contain a trigger or the program will not complete even if the …
Numéro de la FAQ57576
How do you configure the TLA7016 for use on your network?
Please refer to the TLA7000 Installation Manual for details on how to configure the TLA7016 for use on your network.
Numéro de la FAQ56616
Why do I not get output on my external VGA monitor when using the DVI to VGA accessory connected to the Primary DVI-D port on the TLA7012?
The Primary DVI -D port requires a true DVI monitor. Only the SecondaryDVI -I output is compatible with VGA when using the DVIto VGA accessory that is included with the TLA7012.
Numéro de la FAQ57046
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ53971
What is the max system memory for TLA7012 and TLA7016 system?
These motherboards both have 2 DIMM sockets. We currently ship 1GB of memory configured as 2 x 512M. The memory can be increased to a maximum of 2GB when 1GB DIMMS become available.
Numéro de la FAQ56946
Can the TLA Application Software support multi-user? (Dedicate separate modules in chassis to different users?)
No, it is not possible to split one mainframe into multiple logical mainframes.
Numéro de la FAQ56441
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ54981
My Touch Screen doesn't work on my oscilloscope. How do I enable it?
The touchscreen driver is not installed or functioning properly. For customers this is most often due to the user selecting "stop installation" during the first turn on experience. The user is prompted to install the driver with a Hardware …
Numéro de la FAQ63891
Can the new TLA7012 and TLA7016 mainframes+ hubs+ computer+ etc be mounted in a 19” equipment rack?
Yes. Both mainframes have an optional rackmount kit. The TLA7012 rackmount kit is 020-2664-XX  and the TLA7016 rackmount kit is 020-2369-XX.. 
Numéro de la FAQ55296
Windows XP has multiple language support but is there multiple language support within the application?
The windows XP language setting applies to all standard windows dialogs and some standard Windows selection buttons. So, things like the save and open dialogs will be translated and buttons in dialogs like OK, Cancel, etc. will be translated. The TLA …
Numéro de la FAQ57096
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ54131
What's the maximum MHz Bandwidth that the P6960 Flying Leads support?
The P6960 uses single-ended lead sets, which should perform well up to 100MHz. Actual performance depends on several factors like the number of channels being probed, the length and number of ground leads, the proximity of the channels to one another …
Numéro de la FAQ57926
Will TLA Application Software Version 4.0 and above run under Windows 95 or 98?
No. Version 4.0 and above only operate under Windows 2000 or XP Professional.
Numéro de la FAQ56331
Will the TLA Application Software v5.1 run on the 64bit version of Windows XP?
No. You need Windows 2000 professional or Windows XP Professional to run TLA Application Software v5.1.
Numéro de la FAQ56326
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ53961
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55006
When you set-up a "Mark" in a TLA application V5.1 Listing or Waveform window and then add comments to it+ will the comments be included in any printouts of the data?
If you mouse over a mark header the name of the mark and the comments for the mark are shown in a tooltip. The tooltip will be captured if you print the display.
Numéro de la FAQ56201
In a TLA7000 series multi-frame+ why does one mainframe need to be the master?
The master mainframe controls clock distribution used for correlation and controls start/stop synchronization. The master mainframe is also used for the trigger in/out and signal in/out connections.
Numéro de la FAQ56701
Do you have plans to support the TLA Application Software for other Operating Systems?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ56471
What version of mainframe firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TLA7016 mainframe.
Numéro de la FAQ56176
What is maximum number of symbols that can be used?
The number of symbols is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61181
Which cart do you recommend for the TLA7016?
We recommend the K4000 for use with one TLA7016.
Numéro de la FAQ57026
What is the advantage to buying a P6982 probe instead of a P6980 probe?
The P6982 is exactly the same as the P6980 except that it has only one 17-ch probe head so the total number of channels is 17 instead of 34. A customer would order the P6982 if they are only using quarter or half channels for (4x or 2x clocking). In …
Numéro de la FAQ57741
Can I install new modules in my TLA714+ TLA715 portable and TLA720+ TLA721 benchtop mainframes?
Not all the current modules can be used with the older mainframes.  The current modules TLA7Axx and TLA7NAx can be used in the TLA714, TLA720, TLA715, and TLA721 mainframes as long as they are running TLA Application Software v4.4 or above.However …
Numéro de la FAQ60436
Is it possible to save data acquired by a Logic Analyzer as an ascii-file (CSV format). I want a column with timing data+ and a column with ones and zeros.
Yes, you can save acquired data. With the Listing window currently open select export data from the File menu. This will save your acquired data as a .txt file. The data from within the .txt is taken from the Listing Window and the file format is the …
Numéro de la FAQ57436
Have there been any changes to the TLA7QS QuickStart?
There have been no changes to the TLA7QS circuit board. The TLA7QS workbook and software setups have been updated and are still compatible with Version 3.2 or higher of the TLA application software.
Numéro de la FAQ60626
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ54271
After installing the LabView Driver tktla the driver examples and VIs have a broken arrow and several of the subVIs have the error "Invoke Node 'Invoke Node' : contains unwired or bad terminal."
Please make sure .NET 1.1 SP1 is installed. If .NET 2.0 is also installed it is possible there is a conflict between LabView and another application. Try uninstalling .NET 2.0 and then reinstalling the tktla driver. Any VI that was saved after …
Numéro de la FAQ55176
What is the minimum signal amplitude for P6800 or P6900 series probes+ and P6400 series probes?
The minimum signal amplitude for single ended P6800 and P6900 series probes is 300mV peak-to-peak. The minimum differential is Vmax minux Vmin >= 150mV. The minimum signal amplitude for single ended P6400 series probes is 500mV peak-to-peak.
Numéro de la FAQ57821
How many waveforms can be displayed at one time?
The number of individual channel or busform waveforms that can be in any given Waveform window is limited only by the amount of virtual memory in the mainframe. In testing, we stopped adding waveforms at 2,000. The number of waveforms that can be …
Numéro de la FAQ60791
Why does the readout value of the counter/timers when used as a logic analyzer trigger event appear incorrect even though the logic analyzer triggered correctly?
Under certain conditions, when a counter/timer is used as a logic analyzer trigger event, the readout value displayed in the Status Monitor is incorrect even though the logic analyzer triggered correctly. The problem occurs under the following …
Numéro de la FAQ61426
My trigger is set to "trigger immidately" or "If anything then trigger". Why is my memory only half full?
This is because the default trigger position is set to 50% memory before the trigger and 50% memory after the trigger. Since the Logic Analyzer is triggering off the first thing it sees, it does not get a chance to fill up the first 50%. To fix …
Numéro de la FAQ57571
How do I change my TLA7016 from a static IP address to DHCP?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55571
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ54276
Which oscilloscopes are included in the latest iView support?
The TLA application software with iView V6.1.132 or later, supports the following oscilloscopes:TLA iView software >> DownloadPlease contact an Application Engineer in our Support Center if you have further questions that can't be answered here or in …
Numéro de la FAQ61416
What is the maximum number of channel groups?
The number of channel groups is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61276
What is the current version of DSO (digitizing oscilloscope) module firmware and will I need to update it if I install Version 4.4?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61221
Is GbE necessary for the TLA Application Software or will the mainframes work with slower Ethernet infrastructure (e.g.100Mb)
GbE is not necessary. TLA7012 and TLA7016 mainframes will work with 10/100/1000 networks.
Numéro de la FAQ56726
How long does it take to update the mainframe firmware in my TLA7016?
It takes approximately 3 minutes to update the mainframe firmware.
Numéro de la FAQ55741
In the TLA Application how do I load and use a symbol file into my Listing Window or Histogram?
The logic analyzer uses two kinds of symbol files: Pattern symbol files and Range symbol files. The Range symbol files can contain function symbols, variable symbols, source code symbols, and color symbols. For a more thorough explanation of Symbol …
Numéro de la FAQ55846
Can I trigger on multiple busses with time correlation?
Yes, using intermodule signaling.
Numéro de la FAQ59121
How did you achieve the faster backplane in the TLA7000 series mainframes? What are you using?
We fine-tuned bus timings using a newer FPGA design and added enhanced DMA capability.
Numéro de la FAQ56521
Do you have an application note that explains how and when to use a logic analyzer? Is there a tutorial that will show me how to use my logic analyzer?
The XYZ's of Logic Analyzers explains the evolution from the digital oscilloscope to the logic analyzer. It explains the capabilities of a logic analyzer and will you choose the correct tool for your particular application. The Introduction to …
Numéro de la FAQ55406
What is the recommended calibrating interval for your logic analyzers? Do probes need to be calibrated?
We recommend calibrating your logic analyzer every year. Probes do not need to be calibrated.
Numéro de la FAQ57836
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ53571
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ54991
What happened to TLAVu?
Version 4.4 was the last version to have a separate off line viewer. The TLA software v5.0 or above no longer offer the separate TLA offline viewer.  The TLA software itself has integrated with the offline data viewer.  The user will need to install …
Numéro de la FAQ54616
I would like to connect our Logic Analyzer to a Scope with an iView cable. This scope is not in the current list and I am not sure how to add it to the Logic Analyzer system.
Go to System Menu 'Add iView External Oscilloscope? In the next window make sure the box "Show only iVerify compatible oscilloscopes" is not selected. You should be able to select your scope from the list. Hit the Next button and you will see …
Numéro de la FAQ57416
What is the current version of LA (logic analyzer) module firmware and will I need to update it if I install Version 5.1?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61226
Are the P6810+ P6860+ P6864+ P6880+ P6960+ P6962+ P6964+ P6980+ P6982 probes compatible with our Logic Analyzer?
The P6800 and P6900 series probes are not compatible with TLA5200/B series, TLA600 series or TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer modules. They are compatible with TLA7AAx/ABx/NAx/BBx modules.
Numéro de la FAQ57126
Is there a way to write a Linux application to control our Logic Analyzer?
The easiest way to programmatically control a logic analyzer in a Linux/UNIX environment is with a script such as ActivePerl (a variety of Perl that has COM capabilities). If you wish to build a Linux application and have all the features of TPI.NET …
Numéro de la FAQ55896
Can I install new modules in my TLA704 portable and TLA711 benchtop mainframes?
No. You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60431
What is the last supported TLA application software version for the discontinued TLA700 series such as TLA714+ TLA720+ TLA715 and TLA721?
TLA Model Last supported TLA application softwareTLA714 v4.4TLA720* v4.4TLA715 v5.1 SP1TLA721* v5.1 SP1 *note: with the upgrade kit TLA7KUP option 19, the user could upgrade the TLA720 or TLA721 to TLA7016.  After the upgrade, the TLA7016 supports …
Numéro de la FAQ61261
Is TLA Software Application V5.1 Windows Server 2003 compliant?
We have not tested this so operation is not guaranteed. The application has been tested, and is supported on, Windows 2000 Pro and Windows XP Pro platforms (32 bit only).
Numéro de la FAQ56776
My logic analyzer has X amount of memory depth. How many samples is this equal to?
Memory depth in a logic analyzer is the same as the number of samples. For example a module with 512Kb of memory would give you 512K (524,288) samples across every channel.
Numéro de la FAQ57551
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ54326
Can you split the TekLink expansion hub between 2 or more multi-mainframe (Mainframe plus expansion mainframe/s) TLA systems?
No – you will need one TekLink expansion hub for each multi-mainframe system.
Numéro de la FAQ56451
What happens if the network goes down while I am taking an acquisition with a TLA7012 or TLAA7016 and the acquisition completes while disconnected. Can I reconnect and get my data?
If the network connection is lost, you will need to restart the TLA application and the data in the modules will be lost.
Numéro de la FAQ56896
Is there a way to capture LVDS using a P6410+ P6417 or P6418 probe?
The LVDS/TTL to single-ended TTL converter pod will allow the customer to capture low voltage differential signals on the TLA using the P641/P6417/P6418 probe. For detailed electrical characteristic differences please contact Dragonfly Software.
Numéro de la FAQ57506
In the TLA Application can I change a channel polarity?
To Change a Channel polarity:1) In the System window, click the LA Setup button.2) Click Channel Polarity in the Table Shows box.3) Click the button under Probe Channels/Names that corresponds to the channel for which you want to change polarity.
Numéro de la FAQ55836
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55001
Can I merge my TLA700 modules?
It depends whether or not the modules are compatible and only modules with 102 or more channels can merge. The following are the basic rules for merging modules: TLA7Nx modules can be merged together, or with either TLA7Px or TLA7Qx modules. TLA7Nx …
Numéro de la FAQ57146
Is there a way to configure my TLA so that an email is sent when a trigger occurs?
Yes, follow the following steps:Enable Repetitive Run Mode Place the TLA logic analyzer in repetitive run mode by clicking on the repetitive/single run button to the right of the Run button. Access the Repetitive Properties Menu. Click on System and …
Numéro de la FAQ57511
What is the file format for saved data in the new TLA Application Software v5.1? Apparently+ different versions of the App SW have different formats.
The .tla file format changes from release to release. Because of this, we do not publish the .tla file format.
Numéro de la FAQ56941
Did the Performance Verification software change when TLA Application Software v5.1 was introduced?
The Performance Verification software did change a little.  The software for TLA7Lx/Mx/Nx/Px/Qx and TLA7Dx/Ex modules have not been updated to run on a remote PC controller.  If you need to verify one of those modules, you must do so in a TLA7012 or …
Numéro de la FAQ55391
I want the listing to show the system time when triggered in the TLA Application Software. The Timestamp does not display the hours+ minutes or seconds column.
To show the system time the Timestamp Reference must be set to Absolute. Right click the Timestamp column. Go to Properties and choose the column tab. In the Timestamp Reference Box choose Absolute. In the Listing Window move the cursor to the top …
Numéro de la FAQ55816
What is the filename of the file needed to update my TekLink firmware on my TLA7016 or TLA7012?
The file needed to update the TekLink firmware is "TekLink.upd".
Numéro de la FAQ56111
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ52541
I do not want to store consecutive samples. How do I only store the samples that are relevant?
There are a number of ways to store only the samples that you want. Selecting storage none allows one to only store when a state explicitely says to store a sample. Transitional storage only stores a sample if one of the specified channel goups …
Numéro de la FAQ57396
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ53566
Are unused clock or qualifiers usable as data inputs when sampling asynchronously or in timing mode or with an internal clock?
Yes.
Numéro de la FAQ60396
Can I install Windows XP on older TLA’s?
The TLA600 series, TLA704, TLA711, TLA714 and TLA720 are not supported for Windows XP. TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57141
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ52721
How can I locate the MAC address of the TLA7016?
If you know the IP address of the TLA7016, you could try to following commands in the DOS prompt to look up the MAC address.c:\ ping c:\arp -aand you will see MAC address of TLA7016If you do not know the IP address of the TLA7016 …
Numéro de la FAQ59411
What programmatic options do I have to remotely connect to the Logic Analyzer from my Windows OS.
TPI.NET - Provides great flexibility in choices for development languages. Component developers can use any language that supports .NET -- VC++, C#, VB, and others. .NET offers an easy way for developers to create components. COM/DCOM - Supports …
Numéro de la FAQ57886
What happens to my TLA connection when I press the RESET button on the TLA7016 Interface Module's front-panel? Is the acquired data in the modules lost?
Pressing the reset button the Interface Module will cause the network connection to be lost. When this occurs, you will need restart the TLA application and any data in the modules will be lost.
Numéro de la FAQ56901
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ54376
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ53986
Are all my modules supported in your TLA7000 series mainframes (TLA7012+ TLA7016)?
Yes, every logic analyzer and DSO module for the TLA700 series is compatible with the TLA7000 series mainframes.
Numéro de la FAQ55196
For my current TLA714 portable or TLA720 benchtop mainframe+ what upgrades are necessary before I can use the new TLA7PG2 pattern generator module?
You should upgrade all of your TLA700 Series mainframes that will be used together to Version 4.0. Please order TLA7UP Option 11 or download Version 4.0 TLA Application Software for FREE. The FREE software can be located under Resources For You in …
Numéro de la FAQ59341
I would like to automate the acquisitions. How can I repeatedly take acquisitions without user interaction in the TLA Application?
Repetitive Mode allows taking acquisitions repeatedly without user interaction. This can be turned on or off by either clicking on the arrow next to the run button or selecting Repetitive under System->Repetitive. You can change the settings for …
Numéro de la FAQ55821
In my TLA+ why does the timer keep going after I clear it?
Clear timer will always clear the timer to zero but the timer will start over and continue to run. If you want to stop the timer before starting it over then stop the timer in one state and clear the timer in the following state.
Numéro de la FAQ57431
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ52566
How do you save a system with data?
Go to File -> Save System. Make sure the option to save acquired data is checked.
Numéro de la FAQ57356
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ52551
Can I connect flying leads to my P6860+ P6880 or P6419?
Yes, Nexus has an adapter, the NEX-CFLSE & NEX-CFLDF that will allow connection between the connectorless compression probe and Tektronix probe flying leads. Please visit Nexus for details.
Numéro de la FAQ55246
How do I activate the rear panel SVGA output on the TLA714 to drive an external monitor? The Display Adapter and Display control panels do not appear to offer the option+ and the monitor I have connected to the port does not see a signal.
In order to activate an external monitor via the Secondary Video SVGA output you will need to go into the BIOS during startup. Press F2 to go into BIOS (during boot) and go to the advanced menu. Go down to "Silicon Motion Simulscan" and enable it …
Numéro de la FAQ57286
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ52851
I am using a LabView client application to communicate with the Logic Analyzer but am receiving an error 1172 when I try to connect.
Please make sure you can first communicate locally from the logic analyzer. You can use one of the three example VIs that came with the tktla driver available from National Instruments. Also you need to include the TlaNetInterfaces.dll within the …
Numéro de la FAQ55766
Do the TLA mainframes support DHCP?
The TLA mainframes can be configured to support DHCP client capability so that when you connect the TLA to a network, it will automatically acquire an IP address and configure itself accordingly without manual intervention.If a TLA mainframe is on a …
Numéro de la FAQ56466
State VS. Timing - What is a state timing measurement or a timing measurement? What is the difference between internal and external clocking?
For a state measurement the logic analyzer is clocked by a signal from the system under test. At every valid clock, the logic analyzer takes a snapshot of the system under test. This snapshot (sample) is clocked by the system so the measurements are …
Numéro de la FAQ57631
I have connectorless compression probes (P6860+ P6880+ P6419) and need to connect to the Mictor on board. Is there an adapter to do this?
The NEX-HDSWIZ2 is used when there is a Mictor connector on a target that must be connected to Tektronix P6860, P6880 or P6419 compression probe(s). In addition to making this connection, the adapter also provides the ability to rewire the pinout …
Numéro de la FAQ55811
My TLA is running Windows 98. Can I upgrade the TLA SW to the latest version?
The latest version of TLA application software compatible with Windows 98 is V3.2. Version 4.4 of the application software is not compatible with Windows 98 and so the OS must be upgraded to Windows 2000 if you wish to install the latest application …
Numéro de la FAQ57561
The signal mapping of my on board Mictor for P6434 is not equal to the mapping required for the support package. How can I re-wire the signals to meet the support package mapping?
Nexus offers a Adapter called the NEX-HDSWIZ for re-wiring Mictor connectors on a target for connection to Tektronix P6434 High Density Probes. It provides the ability to rewire all 38 connectors. Please visit Nexus for details.
Numéro de la FAQ56011
How do I change my TLA7016 from DHCP to a static IP address?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55576
Can V5.1 of the TLA application SW run on Linux?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ55321
Does the logic analyzer have a constant repetitive trigger mode?
Yes. Select the repetitive trigger mode by either clicking the arrow next to the RUN button or selecting System->Repetitive
Numéro de la FAQ60586
Is it possible to define several trigger conditions using the same channel(s) for these triggers?
Yes.
Numéro de la FAQ60891
What is the Operating System on the TLA7016?
This will depend upon the computer used to control the TLA7016. Customers can use either Windows 2000 Professional or Windows XP Professional machines to control the TLA7016. The TLA7PC1 controller supplied by Tektronix ships with Windows XP …
Numéro de la FAQ56966
Could the logic analyzer with less than 136 channels be used for the 4x clocking mode?
Yes.  However, part of the channels on the probe head would be disable for transferring the signals and used for the storage only.  If you have the TLA7 NA 4/AA4/AB4/AC4/BB4/BC4 modules, you could use the 4X demux probe P6964 which has 4 probe head …
Numéro de la FAQ59196
Is the GbE link on the TLA7012 and TLA7016 Tek proprietary or the industry standard?
The GbE ports on the TLA7012, the TLA7016, and the TLA7PC1 are compliant with industry standards.
Numéro de la FAQ55871
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53561
I would like to get a user guide to run the TLA. Do you have a downloadable PDF file to document how to use your instrument?
Yes, you can download the latest manuals at Tektronix Manuals Finder The TLA Family Quick Start User Manual is a good reference for the TLA Series.
Numéro de la FAQ57421
What is the filename of the file needed to update my mainframe firmware on my TL708EX?
The file needed to update the mainframe firmware on the TL708EX is "TL708EX.upd".
Numéro de la FAQ56096
My memory storage is set to none and the system triggers but the program does not stop running.
In order for the acquisition to complete the entire acquisition buffer must be full. Normally when one triggers the module the rest of the buffer fills very quickly because all samples are stored until the buffer fills (storage set to all). If there …
Numéro de la FAQ57556
Can you create your own trigger in the waveform trigger window in TLA application software V5.1?
No - not at this time.
Numéro de la FAQ55326
What is the trigger latency between mainframes+ when a module (TLA7AA4) from the Master
TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger latency via TekLink cable is 161ns plus 1 sample. TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger via TL708EX is 186ns plus one sample.
Numéro de la FAQ64221
Is Windows XP available on any TLA?
Currently Windows XP is the operating system on TLA7012 and TLA7016 mainframes and the TLA5200B series logic analyzers.TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57546
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ53556
Could I use the qualifier channel as the external clock?
No.  You can not setup the qualifier as the clock channel.  However, you could plug in a different probe slot to make sure it has the clock channel instead of the qualifier channel.  Both of the clock and qualifier channel could be used as a data …
Numéro de la FAQ59191
What is the Maximum state acquisition offered by the TLA7Axx?
The TLA7Axx offers up to 800MHz sampling rate in Half Channel mode and 625MHz DDR in quarter channel mode.
Numéro de la FAQ57801
Can the automated measurements available in TLA application V5.1 be pulled out of the LA?
Yes, there is an export button in the measurement dialog that will export the statistics table to a file of type text or csv format.
Numéro de la FAQ55291
Is there a convenient way to functionally test logic analyzer probes?
Nexus, a partner of ours, offers an accessory called NEX-PROBETESTER2. It is compatible with P6400, P6800 and P6900 series probes and is capable of testing up to 32 data channels and a pair of clock/qualifier lines. For more information go to: …
Numéro de la FAQ57486
What is the maximum bus width that can be monitored?
You can combine modules using the special high-speed connectors on the side of each logic analyzer module so that all channels operate from a single timebase. This is called "module merging." All channels may be contained within a single channel …
Numéro de la FAQ61266
Were there any improvements made to the TLATPI (Tektronix Programmatic Interface) in Version 4.4?
Please refer to the TLA Family Logic Analyzer Release Notes (ReleaseNotes.doc). If you use TLATPI on a remote machine, you must use the same version of TLA Application Software as the TPI Client Software; otherwise you may experience compatibility …
Numéro de la FAQ61076
My iView cable is too short to attach the PC to the TLA7016. Do I need a different cable?
One can choose to use a TLAPC1 in these cases. The TLAPC1 is designed to be placed on top of a TLA7016 mainframe in close proximity, thus allowing usage of the iView cable in its current configuration
Numéro de la FAQ55936
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ54386
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53581
How long is the Teklink cable?
2 meters
Numéro de la FAQ56636
Is there an adapter for the P6960 probe to the Mictor connector on board?
Yes, Nexus makes an adapter (NEX-M2P69X) that will allow a P6960 probe to connect to the mictor connection on the board. Please visit Nexus for details
Numéro de la FAQ57526
How do you take a screen capture on the TLA?
SnagIt made by TechSmith comes with every current logic analyzer portable and mainframe and on the application CDs for version 4.2 of the application software and later. This tool is used for all your screen capture needs. SnagIt will allow you to …
Numéro de la FAQ57361
Will my older TLA7Lx and TLA7Mx logic analyzer modules or TLA7Dx and TLA7Ex digitizing oscilloscope modules work in the new TLA7012 portable or TLA7016 benchtop mainframes?
Yes, but you must reflash the firmware on your modules with the new Version 5.1 compatible firmware located on your TLA mainframe hard disk.If any module that is not running Version 5.1 compatible firmware is installed in a TLA mainframe running …
Numéro de la FAQ56321
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ52856
How do I stop/disable the TLA Application V5.1 from automatically starting up after booting the TLA?
From the TLA Application go to the System Menu->Options->Startup Tab. There is an option to Disable starting the TLA Application on login.
Numéro de la FAQ55726
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ54001
How can I get the features of the new TLA715 portable or TLA721 benchtop mainframes (e.g.+ faster CPU+ internal CD-ROM+ USB+ etc.) in my existing TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60656
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ53806
In the TLA Application Software Listing Window I would like to know the State for each acquired sample (Trigger State Machine).
Go the the Setup window and add a new Group. Then add the status bits to this group. They are located at the bottom of the section called "Probe Channels/Names". Now right click the new Group Name for your status bits and choose "Select Status Bits …
Numéro de la FAQ55856
How can I enable the compound clocking in the TLA application software v5.6?
The compound clocking is not implemented in the v5.6 software yet.  If you need compound clocking, you will need to use the v5.1 SP1 software.  However, if you have a saved setup file created in v5.1 SP1 software, you will still be able to use the …
Numéro de la FAQ59396
How does the logic analyzer implement transitional timing?
All data is sampled using the logic analyzer's internal sample clock that can be varied from the minimum sample interval of 2ns to 50 msec. Transitional Storage mode works when using either internal or external clocking. The Storage feature in the LA …
Numéro de la FAQ60761
Where can I found an installation instruction and an oscilloscopes compatibility list for the iView cable?
In the TLA application software, go to "System" -> "Add iView External Oscilloscope" to see the list of oscilloscopes supported by the TLA and the installation instructions.
Numéro de la FAQ60196
In the TLA Application how do I combine the setups from my unmerged modules into a new setup for my merged module system?
First Export the individual setups from each module. For each module open its Setup Window, go to the File menu and select Export Channel Setup. After you have exported every module setup, merge the system (Both physically and then logically by going …
Numéro de la FAQ55841
What version of TekLink firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TekLink firmware on the TLA7016.
Numéro de la FAQ56181
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ52906
What is the replacement for the TLA7AAx+ TLAABx or TLA7NAx module?
The TLA7ACx is the direct replacement for the TLA7AAx, TLA7ABx or the TLA7NAx module.  It comes standard with the fix channels assignment for the analog mux (the 4 BNC analog outputs).  With the option AM, it will enable the fully implemented analog …
Numéro de la FAQ60101
How do I determine how much memory is installed in my Logic Analyzer?
Within the TLA Application software go to System -> System Properties -> Select LA X tab.
Numéro de la FAQ57306
What is TekLink?
It is an instrument interconnection interface. Currently TekLink 1.0 is implemented on the Logic Analyzer mainframe TLA7012 and TLA7016 for interconnection between the expansion mainframe.  TekLink 2.0 is implemented on the DPO/DSA70KB.  It is used …
Numéro de la FAQ61196
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ52961
How long does it take to update the TekLink firmware in my TLA7016?
It takes approximately 4 minutes to update the TekLink firmware.
Numéro de la FAQ55746
How much hard disk space is used by the TLA application & Windows 2000 Professional?
As delivered, your TLA700 system has approximately 1.1 GB of disk space used by the Windows operating system, utilities, and the TLA application files.
Numéro de la FAQ60796
It takes a long time for the TLA Connection Window in the TLA Application to find my logic analyzers. Can I speed this time up?
If your network does not have DNS it will take longer for the Application to translate hostnames into IP addresses. To eliminate this search time it is recommended to include a HOSTS file on your PC under the Windows folder->system32->drivers->etc …
Numéro de la FAQ55916
Is there any way to get simultaneous LA and DSO acquisition without having to double-probe?
Yes, if you have a TLA7Axx you can use the 4 analog outputs to get simultaneous analog and digital measurements. However, the TLA7Axx is currently the only LA that supports analog and digital measurements through a single probe.The TLA7Axx iView …
Numéro de la FAQ59731
Will the TLA application software run on a regular PC so I can perform off-line setups and off-line analysis of data?
TLA software v5.0 and v5.1 can be loaded on a PC using Windows 2000 and XP. You will be able to perform off-line setups and off-line analysis of data as well as remote control of the TLA mainframe.  TLA software v5.6 and v5.7 works only with Windows …
Numéro de la FAQ61466
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on …
Numéro de la FAQ55686
Can a TLA be rebooted remotely?
Windows XP remote desk top (RDT) can be used to remotely reboot a machine. There is no planned way to turn on a machine remotely.
Numéro de la FAQ56366
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ54986
Does an application exist to convert waveform data or .prn files to pdf or another windows format?
There are third party converters available to convert .prn files to pdf. You can find these applications by searching for them in google. All versions of TLA SW 4.2 and later (not including web install) include SnagIt which can capture a picture of …
Numéro de la FAQ57236
What is MagniView?
MagniVu data is the result of asynchronous digital oversampling architecture. This data is automatically acquired whenever you perform an acquisition. This means that, even if you specify synchronous (state) acquisition, you can view the asynchronous …
Numéro de la FAQ57726
I am using TPI.NET to load a saved system. When I load a system the Listing Window reverts any saved changes back to the default settings. Why does it behave this way?
When a module is loaded, the TLA SW application does not assume that the new module setup will have the same channel groups as the previouse setup. Therefore all the Waveform traces and Listing columns associated with data from the previous modules …
Numéro de la FAQ57391
How closely matched are the P6400 series probes?
The time delay specifications are the same on every P6400 series probe (P6410,P6417, P6418, P6419 and P6434 probes). This allows you to mix probe types on the same logic analyzer, thereby preserving accurate data correlation from the probe tip of …
Numéro de la FAQ60671
How do I rackmount my TLA mainframe?
Rackmount kits are available for the TLA600, TLA5000 and TLA700 Series. You can find order details for the rackmount kit in the TLA600, TLA5000 and TLA700 series product information data sheet. In the data sheet for the TLA5000 series, it is located …
Numéro de la FAQ60726
Are channels reduced when the sample rate is 8 GHz?
No. The 8 GHz sampling provided by MagniVu is available on all channels, all of the time through the same probe simultaneous with up to 800 MHz* state timing. *Sample rate and state timing limits depend on Logic Analyzer model and ordered options.
Numéro de la FAQ60336
Is there a new version of TLAVu? All I can find is v4.4 and v3.2.
TLAVu no longer exists. Instead, we integrate the offline data viewer into the TLA software itself.  To use the offline data viewer, simply run the TLA software on the regular PC in offline mode.  The latest TLA software is available at www.tek.com …
Numéro de la FAQ52946
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ52591
Where do I find what version of TLA Application Software I currently have?
The version number can be found from within the TLA Application under System Properties in the System menu.
Numéro de la FAQ61411
Is there an expansion mainframe available for my TLA mainframe?
Yes, the TLA7XM Expansion Mainframe which extends the TLA714 or TLA715 portable mainframe from 2 to 24 modules and the TLA720 or TLA721 benchtop mainframe from 5 to 60 modules. Please refer to the TLA700 Series section for further details.
Numéro de la FAQ60936
Does the enhanced monitor firmware need to be updated if I'm upgrading my TLA7016 from v5.0 to v5.1?
No. The enhanced monitor only needs to be updated if you are converting a TLA720 or TLA721 to a TLA7016 using TLA7UP option 19.
Numéro de la FAQ55416
What is the filename of the file needed to update my mainframe firmware on my TLA7012?
The file needed to update the mainframe firmware on the TLA7012 is "TLA7012.upd".
Numéro de la FAQ56101
When connected to the LAN and using the remote host mode in the TLA Application Software how does it find the mainframe or if there are several mainframes on the LAN how does it identify the specific mainframe you're looking for?
There is a connection dialog that is used that can display TLA's on the network, can search for TLA's connected to a network, or can automatically connect to a TLA of the users choice. The connection dialog shows IP address or host name of the TLA's …
Numéro de la FAQ56186
Is the name of the TLA available over TPI.NET?
No. TPI.NET does not provide the names of TLA’s on a network, nor does it provide the name of the TLA to which a client is currently connected.
Numéro de la FAQ56741
Where can I find the LabView drivers for my logic analyzer?
LabView drivers are downloadable from National Instruments Instrument Driver Network. You can download them from the website or if using LabView 8.0 or later open LabView and go to Help->Find instrument Drivers and enter tktla for the keyword.
Numéro de la FAQ56211
Can setups and data be shared between the TLA600 Series and the TLA700 Series?
Yes, you can easily share both seteups and data.
Numéro de la FAQ60481
What is the maximum channel group name length?
There is no limit to the channel group name length.
Numéro de la FAQ61271
Do the TLA700/7000 Series Logic Analyzers Series use VXI technology?
Yes, however, the TLA700/7000 Series Logic Analyzers do not allow any non TLA700/7000 modules to be used nor can the TLA700/7000 Series mainframes be used as a VXI mainframe. 
Numéro de la FAQ60541
While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?
Highlight state 1 in the Overview section of the trigger window. The Overview section is at the left section of the Trigger window. Right click on State 1 and "add state". New state is now after State 1. Right click on State 1 again and "cut state" …
Numéro de la FAQ58996
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53576
How do I attach the connectorless compression probe to the design board?
There are two methods to connect the compression probe to the design board. One may use a Nut Block for PCB's .050'' to .093'' thick. The Nut Block may be easily removed. For PCB's .093'' to .250'' thick the Press-in Nuts are used.
Numéro de la FAQ57296
Can the TLA assert a hardware interrupt on my target system?
Yes, using either the Trigger Out or Signal Out connectors, both of which are TTL-compatible outputs, back-terminated into 50 ohms.
Numéro de la FAQ60521
Will the older Oscilloscope TLA7Dx and TLA7Dx modules work in the new mainframes?
Yes. The TLA7Dx and TLA7Ex Oscilloscope modules will work in the TLA7012 and the TLA7016. All existing TLA700 series modules will work in the new mainframes.
Numéro de la FAQ57086
How do I set up a trigger and what resources and strategies are available for creating my own triggers?
A large number of trigger resources are available that make it possible to trigger at just the right time and store just the right data. Setting up these resources can be challenging for a new user. To minimize this effort a feature called Easy …
Numéro de la FAQ58286
Is there a way in the TLA Application Software to do performance analysis? I need to know how often my bus or group is in certain ranges.
Use the Histogram window to set up, capture, and display performance analysis data from an LA module channel group, counter, or timer. Each Histogram window displays address ranges and the corresponding counts, percentages, and histogram bars based …
Numéro de la FAQ55891
Can multiple clock sources be acquired using a single logic analyzer?
Yes, multiple clock sources can be acquired using a single logic analyzer as long as the active clock edges are the minimum sample time (either 2ns or 4ns depending on module model). *Minimum sample interval is 4ns for TLA6xx Series, TLA704 and older …
Numéro de la FAQ60471
What probes can be used with the TLA7NAx+ TLA7Axx or TLA7BBx modules?
The following probes can be used with the TLA7NAx, TLA7Axx or TLA7BBx modules: P6810, P6860, P6864, P6880, P6960, P6962, P6964, P6980 and P6982.
Numéro de la FAQ57881
Is there ever going to be a mechanical (new processor board) upgrade path for the TLA715?
We will not be offering a processor board upgrade for the TLA715. Current TLA715 customers can upgrade to v5.1 of the TLA Software Application and take advantage of the new remote hosted mode to use an external (faster) PC to run the TLA software …
Numéro de la FAQ56771
I connected the Trigger Out from my logic analyzer to my Oscilloscope but it does not send a trigger pulse to the scope. What could be the problem with the logic analyzer?
One can turn off the System Trigger Out on the Logic Analyzer. Please check this setting from: System -> System Trigger... Check the box for Enable System Trigger Out.
Numéro de la FAQ55791
I cannot connect to my TLA7012 or TLA7016 remotely with remote host mode.
There are a number of reasons why you might not be able to connect via the remote host mode. Perform the following checks: (TLA7012 Only) Check to determine the TLA Server is on. This is automatically turned off upon restart. You can find it in the …
Numéro de la FAQ55776
Can you disconnect someone from the TLA (i.e. if they are using remote desktop)?
No. The connection dialog will show who is connected to a TLA and disconnection requires personal interaction from that person.
Numéro de la FAQ56446
I would like to design our connectorless compression (P6860+ P6880+ P6864+ P6419) probe footprints to reduce the circuit board area by half? Can the probes be modified to do this?
Yes, Nexus makes a compression probe head adapter (NEX-2X-PROBE) that allows probes to be placed on opposite sides of the board back-to-back. This reduces the circuit board area needed by half. The holes needed for a 17 channel probe can be used for …
Numéro de la FAQ55826
Will we still have fast inter-module communications in TLA Application Software v5.1 (such as the triggers/control signals) that can be quickly communicated between modules like in previous versions of the Application SW?
Within the mainframe, the internal signaling is the same as before.
Numéro de la FAQ57091
Why can't I connect remotely to my TLA7012 to update the firmware?
Firmware updating for the TLA7012 needs to be done locally.
Numéro de la FAQ56246
Will a DVI to VGA adapter ship with every TLA7012 mainframe?
Yes, each TLA7012 will ship with a DVI-to-VGA adapter; however, customers wishing to use an analog monitor with the TLA7012 will need to supply their own VGA cable.To use a TLA7012 with an analog monitor, the DVI cable or adapter should be attached …
Numéro de la FAQ56316
Are there example LabView VIs available?
The National Instrument Driver tktla is available at their Instrument Driver Network. It contains three examples for using their driver. If using LabView 8.0 you will need to search for them using the NI Example Finder once the driver is installed …
Numéro de la FAQ55211
Can you automate control of the TLA from a Linux system?
There are a couple of options that you have depending on what you want to do. If you want to control the desktop of the TLA from your Linux box, it is suggested that you use VNC. This can be found at http://www.realvnc.com/ . If you want to …
Numéro de la FAQ57206
Why do I get a "IP read error" on the screen of my TLA?
The network factory default for the TLA7016 is DHCP. The TLA is expecting to see a DHCP server on your network and it isn't seeing one. To fix this, make sure that it can communicate with a DHCP server or set it to a static IP address. For more …
Numéro de la FAQ57036
In the TLA Application Software when setting up my trigger+ I would like to setup a trigger event when my Group goes High or Low.
Using the Goes High or Goes Low event is only available by selecting a channel. If your group is made up of one channel then find the channel associated with the group in your channel setup. In the Power Trigger clause definition choose "If channel" …
Numéro de la FAQ55861
What supports and capabilities are there for RapidIO and Serial RapidIO?
The Tektronix TMS805 application support package facilitates the testing of 8 and 16-bit RapidIO rates up to 1 Gb/s. Nexus offers the NEX-SRIO support package for support up to 3.125 Gbps for their Serial RapidIO solution. Please see Nexus for …
Numéro de la FAQ56166
How can I get more DRAM or a bigger hard disk in my TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60651
What is the filename of the file needed to update my mainframe firmware on my TLA7016?
The file needed to update the mainframe firmware on the TLA7016 is "TLA7016.upd".
Numéro de la FAQ56106
Are iView Cable Rev A and Rev B compatible with the current versions of the Application software?
Yes, both Rev. A and Rev. B of the iView Cable are compatible with the most current National Instrument driver available on the v4.4 Application CD.
Numéro de la FAQ57116
Can I boot Windows XP on my TLA7012 or TLA7PC1 from a USB attached hard drive?
Windows does not support booting from USB devices. For further information: http://www.microsoft.com/whdc/device/storage/usb-boot.mspx
Numéro de la FAQ56376
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ53736
Is there an adapter for the connectorless compression probes (P6419+ P6860+ P6880) to the mictor connector?
Yes, Tektronix makes an optional probe accessory called the 34 CH MICTOR-ON-PCB TO P6860/80 COMPRESSION ADAPTER.
Numéro de la FAQ57521
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ52971
Can a data or channel group be displayed twice with different display formats?
Yes. Channels and groups may be displayed as Hex, Octal, Binary, Decimal, Signed Decimal or Symbolic. One can display a group two or more times in these formats.
Numéro de la FAQ60401
Will the files that I saved in previous versions of the TLA Application Software correctly load into v5.1?
Yes, all TLA Family save from V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4 or V5.0 systems will load properly on V5.1 systems.The V5.1 save files will not load onto V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4, or V5.0 …
Numéro de la FAQ61456
Can I compare two data acquisitions?
Yes, first you must define the data to compare by setting up the Define Compare dialog box. Go to the LA Setup window and then click the Compare button near the top right corner of the setup. In the Define Compare dialog box you will specify the …
Numéro de la FAQ57136
TLAVu is not installing. It says I need a mainframe.
You are installing the TLA Application software and not TLAVu. Check CD #2 for TLAVu or download it from www.tek.com.
Numéro de la FAQ57651
I want to save ink when I print a waveform. How do I change to a light background color in the waveform display?
Printing a waveform with the default dark background can use up a lot of ink. You can easily change the color scheme to a dark waveform on a light background. First, right click on a waveform in a waveform display and bring up the properties page …
Numéro de la FAQ58431
Is there any way to show the sample with the corresponding trigger program state in the listing or waveform?
Yes, in the TLA System Setup window add another probe group with your desired name such as State. Now add the Status Bits as the probe channels. Finally right click on the group and choose Select Status Bits Type… Choose Trigger State Machine (TSM) …
Numéro de la FAQ57541
How do I transfer from the logic analyzer to a VHDL or Verilog simulator?
Tektronix has added support for SynaptiCAD's products to its line of logic analyzers and pattern generators. The new Tektronix TLA600 and TLA700 Series logic analyzers can capture waveform data in a form that can be read by WaveFormer, VeriLogger …
Numéro de la FAQ60741
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ54996
How do I update the TLA firmware?
must power down the logic analyzer to allow the TLA application to start upproperly.TLA700 Series Logic Analyzers and ModulesIf you need to upgrade the firmware on your logic analyzer modules, a startupmessage appears telling you that you need to …
Numéro de la FAQ57336
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ52386
In the TLA Application I am writing a power trigger and the program does not let me add more than four clauses in a state. I have another trigger program that lets me define up to 8 clauses per state. What trigger program rule am I breaking?
Each state is made up of one or more clauses. If you use more than four triggerevent resources in a state, you can have up to four clauses per state. If you havefour or fewer trigger event resources in a state, you can define up to 16 clausesper …
Numéro de la FAQ55851
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ55146
Where can I find DDRI and DDRII support?
Nexus provides a variety of DDRI and DDRII supports including DDRII support up to 667MHz. Note: They may have faster, newer supports so please visit Nexus for their latest DDR support details.  
Numéro de la FAQ56206
Will my current processor/bus support packages work with Version 5.1?
All TMSXXX support packages introduced prior to Version 5.1 have either Version 1.0, 1.1, 2.0, 3.0, 3.1, 3.2, 4.0, 4.2, 4.3, or 4.4 setup files on the factory-supplied disks that are forward compatible with Version 5.1.All TMSXXX processor/bus …
Numéro de la FAQ61441
I get a message that says "The version of NI-488.2 for Windows does not support the obsolete GPIB-USB you are attempting to install. Contact National Instruments for details on upgrading to a new GPIB-USB revision" when I plug in the iView cable. How do I fix this?
If you get this message, you have an older GPIB-USB cable. You need to have National Instruments 488.2 software v2.3 to get this to work. It can be found on the TLA Application software v5.1 CDs. Anything greater than v2.3 will not support all …
Numéro de la FAQ55796
TLA7000 Logic Analyzers

Numéro du document : 52W-15053-22
Datasheet
TLA7016
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.


Numéro de référence : 077004100
Déclassification
TPI.NET Instructions
TIP.NET


Numéro de référence : 077135300
Programmation
TLA700/7000 Series
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair


Numéro de référence : 077003702
Déclassification
Tektronix Supplemental, 071329504
Product Information Sheet for the People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Numéro de référence : 071329504
Utilisateur
TLA7BXX Series
Logic Analyzer Modules Declassification & Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077014601
Déclassification
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259106
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259105
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259104
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document supports TLA Application Software V6.1 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157506
Utilisateur principal
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174706
Utilisateur/Service combiné
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015801
Service
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.1 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003207
Aide en ligne
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014801
Vérification des performances
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.0 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259103
Utilisateur/Service combiné
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.0 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003206
Aide en ligne
Tektronix
Logic Analyzer Family Quick Start User Manual.

This document supports TLA Application Software V6.0 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157505
Utilisateur principal
020-2664-01
TLA6400 Series Logic Analyzer & TLA7012 Portable Mainframe Rackmount Kit Instructions

This document supports TLA application software V6.0 and above. This document contains information to install a TLA7012, TLA6200 series logic analyzer, or TLA6400 series logic analyzer in an instrument rack.
Numéro de référence : 071175001
Instructions d’installation sur site
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014800
Vérification des performances
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015800
Service
Tektronix Logic Analyzer Series
Product Specifications & Performance Verification Technical Reference

Supports TLA SW 5.6+. This document contains product specifications for several of the TLA products. It also procedures for verifying the performance of the TLA products.
Numéro de référence : 077176303
Vérification des performances
Tektronix Logic Analyzer
Online Help Software Version 5.8 Online Help

This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003205
Aide en ligne
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174705
Utilisateur/Service combiné
TLA Family
Product Safety & Compliance Instructions

This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA5200B Series Logic Analyzer products.
Numéro de référence : 071259102
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157504
Utilisateur principal
TLA Pattern Generator Programmatic Interface, Rev A
PPI Online Help Online Help

The Pattern Generator Programmatic Interface (PPI) is based on COM/DCOM and has been deprecated.
Numéro de référence : 077039600
Aide en ligne
TLA Programmatic Interface, Rev A
TPI Online Help Online Help

Use these instructions to remotely control a TLA logic analyzer using TPI.com. The TPI.(COM/DCOM) interface has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077039700
Aide en ligne
TLA7BXX
Logic Analyzer Modules Service Manual

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 077014700
Service
TLA7KUP
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 077174904
Instructions d’installation sur site
TLAScript, Rev A
Graphical Interface Online Help

The TLAScript software (COM/DCOM) has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077003400
Aide en ligne
TLA7KUP Instructions
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071174903
Instructions d’installation sur site
TLA7012 Rev A
Tektronix Logic Analyzer Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077003900
Déclassification
TLA7000 Series Installation Manual
Logic Analyzers Installation Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071174703
Utilisateur
TLASWUP Instructions
Software Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 075086003
Instructions d’installation sur site
TLA708EX TekLink Instructions
8-Port Instrument Hub and Expander Instructions

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071176501
Utilisateur
TLA7000 Series Technical Reference
Mainframe Technical Reference

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 071176400
Service
020-2369-02 Instructions
TLA72X, TLA7XM, TLA7016 Benchtop Mainframe Rackmount Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071089701
Instructions d’installation sur site
020-2644-00 Instructions
TLA7012 Portable Mainframe Logic Analyzer Rackmount Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071175000
Instructions d’installation sur site
TLA iView Update, V6.1.137
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4104C

Numéro de référence : 066043922
Application
TLA iView update V6.1.134
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: DPO2012B, DPO2014B …

Numéro de référence : 066043921
Application
TLA iView update V6.1.132
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO3012, MDO3014 …

Numéro de référence : 066043920
Application
TLA iView update V6.1.129
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4014B-3, MDO4034B …

Numéro de référence : 066043919
Mettre à jour
TLA Application Software V6.1.127
New feature release includes data import (TDI), MSO/MDO digital channel support, iView over Ethernet, auto-threshold, single-install for PCIe3 support and other enhancements. Includes improvements to stability and functionality. See ReleaseNotes …

Numéro de référence : 066037131
Application
TLACAL PERFORMANCE VERIFICATION SOFTWARE V6.0.213
TLACal is calibration, performance verification and deskew adjust software for LA modules and their compatible probes.

Numéro de référence : 066132703
Utilitaires
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE, V2.4.151
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V5.8.151 TLA Application.

Numéro de référence : 066044538
Application
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE V6.0.267.0
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V6.0.267 TLA Application.

Numéro de référence : 066044539
Application
TLA Application Software V6.0.267
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.Includes firmware updates to TLA7Ax and TLA7Bx modules.Includes iView(TM) support for Tektronix MDO4054, MDO4104, MSO72004 …

Numéro de référence : 066037129
Application
TLA Application Software V5.8.151
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.

Includes firmware updates to TLA7Ax and TLA7Bx modules.

Includes iView(TM) support for Tektronix MDO4054 …

Numéro de référence : 066037128
Application
DSI and CSI2 support software V1.1.025
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132701
Application
DSI and CSI2 support software V1.0.003.1
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132700
Application
TLA iView update
This is an update to the iView support that was released with TLA Software V5.8.027 or earlier. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: TDS2001C …

Numéro de référence : 066043918
Mettre à jour
TLA Application Software
Includes support for TLA6000 Series Logic Analyzers.Includes support for Compound Clocking (multiple clocks and qualifiers, formerly known as Advanced Clocking Mode) in the LA Setup window.Provides an updated firmware image for the TLA7Bxx modules …

Numéro de référence : 066037122
Application
TLA Application Software V5.6.754
Includes support for new TLA7ACx, TLA7BBx, and TLA7BC4 modules.The LA Setup window has been redesigned for improved usability.A new version of TekVISA(TM) provides significant improvements in the area of network connectivity.It cannot be installed on …

Numéro de référence : 066037119
Application
TLA7S08-S16 PCI EXPRESS SUPPORT SOFTWARE v2.0231.1
This is version 2.0.231.1 of the PCI Express support package used with TLA7S08 and TLA7S16 modules.

Numéro de référence : 066044534
Application
TLA TO RSA CONVERSION TOOL
This plug-in tool is designed to run within the TLA Application Software to convert an acquired digital I & Q signal for loading into a Tektronix Real-Time Spectrum Analyzer, or the RSAVu offline software, enabling modulation analysis to be performed …

Numéro de référence : 066100700
Utilitaires
TLA APPLICATION REGISTRY PATCH
This patch should be applied to all TLA700 and TLA7000 products, and all PCs after V5.1 SP1 of the TLA Software Application (WebID 5177) has been installed. It corrects a registry setting that can cause application errors when acquiring glitches.

Numéro de référence : 066085900
Application
TLA APPLICATION SOFTWARE V5.1 SP1
This release is a full maintenance release of the TLA Software Application. After installing, the TLA APPLICATION REGISTRY PATCH (WebID 5360) should also be installed. This release also adds iView support for TDS1000B/TDS200B, TDS1001/TDS2004 …

Numéro de référence : 066037106
Application
Tektronix / FS2 - Collaboration on real-time logic debug solution for Xilinx FPGAs
Article produit
Tektronix delivers complete DDR memory test bench
Article produit
Tektronix and FS2 Answer Debug Challenges for Altera FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Altera FPGA and surrounding hardware.

Numéro du document : 52W-19639-0
Fiche d’informations
Verify and debug DDR2 memory systems
Dossier technique
Tektronix and FS2 Answer Debug Challenges for Xilinx FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Xilinx FPGA and surrounding hardware.

Numéro du document : 52W-20066-0
Fiche d’informations
Tektronix develops comprehensive test for Intel QuickPath interconnect
Article produit
Companies Collaborate on Debug software for Altera FPGAs
Article produit
Command & Protocol Verification of DDR+ DDR2+ and DDR3 SDRAM
Computer memories are not the only systems that continue to demand larger, faster, lower powered and physically smaller memories. Embedded systems design applications have similar requirements. This application note highlights the power of the logic …

Numéro du document : 52W-19236-2
Note d’application
Cross-bus Analysis Reveals Interactions and Speeds Troubleshooting
Cross-bus analysis has become an indispensable troubleshooting methodology. This application note discusses how the powerful new logic analysis solution from Tektronix can speed your cross-bus troubleshooting requirements

Numéro du document : 52W-21073-0
Note d’application
Introduction to Mixed Signal Test Solutions
As the complexity of today’s electronic designs rises with the increase in digital and serial content, the boundaries that define the optimum piece of test equipment can become unclear. Engineers are working with “mixed-signal” designs, which contain …

Numéro du document : 3GT-20213-3
Livre blanc
Timing Error Debugging
New Designs, New HeadachesNew digital devices have become progressively more powerful by incorporating high-speed buses, subsystems, and logic families. They have also become more complex, more sensitive to signal quality, and more time consuming to …

Numéro du document : 55W-18497-0
Note d’application
On the Bleeding Edge: Tektronix Logic Analyzers Enable Tundra Semiconductor to Develop First RapidIO Switches and Get to Market Faster
Challenge: Design, verify and debug the industry’s first silicon switches supporting parallel and serial RapidIO® Solution: Tektronix TLA7000 Series logic analyzer with TMS805 RapidIO application support package that enables 800 MHz state …
Étude de cas
Faster Logic Analyzer Mainframes+ New Software Speed Debugging
Article produit
Test methodologies for high-speed serial designs
Article produit
EDN Selects Tektronix Logic Analyzer as Finalist for Innovation of the Year
Prix
Simplifying Xilinx and Altera Debug
This application note focuses on the issues and techniques that can help you become more efficient when debugging your FPGA systems.

Numéro du document : 52W-20065-3
Note d’application
Suggested Clocking Modes for Acquiring Flash and DRAM Memories with a TLA Series Logic Analyzer
An analysis of ST Microelectronics' M58WR064EB Flash memory and Micron Technology's MT48H4M16LFSynchronous DRAM shows that a fairly fast sampling speed will be required to capture all the signals of interestwith adequate resolution. The obvious …

Numéro du document : 52-19153-0
Note d’application
Serial Analyzers for PCIe 2.0 Provide Power Management and Cross Bus Analysis
Article produit
New Tektronix Logic Analyzer Named to Hot 100 List
Prix
Debugging Timing Problems with a Logic Analyzer
In today’s digital world, embedded systems designs are more complex than ever. With the use of faster speeds, lower power devices and more powerful logic, they are becoming increasingly sensitive to signal integrity issues. This application note will …

Numéro du document : 52W-23621-0
Fiche d’informations
Serial analyzers support PCI Express 2.0
Article produit
Serial analyzers add to comprehensive PCI Express 2.0 testing
Article produit
Logic Analyzer Fundamentals
Like so many electronic test and measurement tools, a logic analyzer is a solution to a particular class of problems. It is a versatile tool that can help you with digital hardware debug, design verification, and embedded software debug. The logic …

Numéro du document : 52W-14266-5
Guide de présentation
Select the Correct Debug Methodology for Your Altera FPGA Design
Debug can on average take up to 50% of the development time, particularly when looking for a difficult issue. We therefore need to use innovative ways to speed up the flow. Tektronix, First Silicon Solutions (FS2), and Alterahave teamed up to provide …

Numéro du document : 54W-21382-0
Note d’application
Serial Analyzers Deliver Comprehensive PCIe Testing
Article produit
Logic Analyzer Triggering Techniques to Capture Elusive Problems
For digital designers who need to verify and debug their product designs, logic analyzers provide breakthrough triggering features that capture real-time digital system operation. This application note explains how to use logic analyzer triggering to …

Numéro du document : 52W-18368-0
Note d’application
Logic analyzer goes PCI Express
Article produit
Understanding and Performing RapidIO Testing
RapidIO architecture delivers significantly increased transmission speeds to enable the design of next-generation networking and communications equipment, but with it comes compliance and interoperability issues. Tektronix comprehensive tool set …

Numéro du document : 5AW-16056-0
Note d’application
Real-time Debugging Measures Signals Without Recompiling
Article produit
Quick Signal Integrity Troubleshooting with Integrated Logic Analyzers & Oscilloscopes
Fast product development requires fast and efficient troubleshooting of signal integrity problems. Signal integrity is a growing priority as digital system designers pursue ever-higher clock and data rates in their designs. To ensure signal integrity …

Numéro du document : 58W-17254-1
Note d’application
RapidIO Architecture: Building the Next-Generation Networking Infrastructure
RapidIO®, a high-performance, packet-switched bus technology, delivers the bandwidth, software independence, fault tolerance and low latency needed for the design of next-generation networking equipment in the communications market.

Numéro du document : 5AW-16056-0
Dossier technique
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets – computers, cell phones, entertainment systems …

Numéro du document : 55C-16736-3
Guide de présentation
The installation manual for TLA Application Software v5.1 says that I may need to update the bridge driver. How do I know if I need to or not?
If you are upgrading from v4.0 to v4.4 to v5.1, then you need to upgrade the bridge driver. If you have v5.0, then it will be upgraded automatically when you install v5.1.
Numéro de la FAQ55996
What is the delay of a signal out from a TLA7000 series mainframe to a scope?
This data will be published in spring 2006.
Numéro de la FAQ56926
Is there an adapter for connecting my connectorless compression (P6860+ P6880+ P6864+ P6419) probes to the Agilent E5378A or E5379A probe footprint?
Yes, Nexus makes adapters for connecting Tektronix P6860, P6880 and P6419 probes to Agilent probe footprints. There are different models of NEX-SAMXX adapters for both single-ended and differential probes. Please visit Nexus for details.
Numéro de la FAQ55901
How many trigger resources can be used in a single trigger program?
A trigger program is made up of one or more states up to 16. Only one state is active at a time. Each state is made up of one or more clauses. If you use more than four trigger event resources in a state, you can have up to four clauses per state …
Numéro de la FAQ60786
My trigger program will not stop running. Why will it not trigger?
Check the status monitor to see if the program is stuck in an undesired state. Check to see if the program has triggered or reached the trigger state. Remember, a trigger program must contain a trigger or the program will not complete even if the …
Numéro de la FAQ57576
How do you configure the TLA7016 for use on your network?
Please refer to the TLA7000 Installation Manual for details on how to configure the TLA7016 for use on your network.
Numéro de la FAQ56616
Why do I not get output on my external VGA monitor when using the DVI to VGA accessory connected to the Primary DVI-D port on the TLA7012?
The Primary DVI -D port requires a true DVI monitor. Only the SecondaryDVI -I output is compatible with VGA when using the DVIto VGA accessory that is included with the TLA7012.
Numéro de la FAQ57046
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ53971
What is the max system memory for TLA7012 and TLA7016 system?
These motherboards both have 2 DIMM sockets. We currently ship 1GB of memory configured as 2 x 512M. The memory can be increased to a maximum of 2GB when 1GB DIMMS become available.
Numéro de la FAQ56946
Can the TLA Application Software support multi-user? (Dedicate separate modules in chassis to different users?)
No, it is not possible to split one mainframe into multiple logical mainframes.
Numéro de la FAQ56441
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ54981
My Touch Screen doesn't work on my oscilloscope. How do I enable it?
The touchscreen driver is not installed or functioning properly. For customers this is most often due to the user selecting "stop installation" during the first turn on experience. The user is prompted to install the driver with a Hardware …
Numéro de la FAQ63891
Can the new TLA7012 and TLA7016 mainframes+ hubs+ computer+ etc be mounted in a 19” equipment rack?
Yes. Both mainframes have an optional rackmount kit. The TLA7012 rackmount kit is 020-2664-XX  and the TLA7016 rackmount kit is 020-2369-XX.. 
Numéro de la FAQ55296
Windows XP has multiple language support but is there multiple language support within the application?
The windows XP language setting applies to all standard windows dialogs and some standard Windows selection buttons. So, things like the save and open dialogs will be translated and buttons in dialogs like OK, Cancel, etc. will be translated. The TLA …
Numéro de la FAQ57096
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ54131
What's the maximum MHz Bandwidth that the P6960 Flying Leads support?
The P6960 uses single-ended lead sets, which should perform well up to 100MHz. Actual performance depends on several factors like the number of channels being probed, the length and number of ground leads, the proximity of the channels to one another …
Numéro de la FAQ57926
Will TLA Application Software Version 4.0 and above run under Windows 95 or 98?
No. Version 4.0 and above only operate under Windows 2000 or XP Professional.
Numéro de la FAQ56331
Will the TLA Application Software v5.1 run on the 64bit version of Windows XP?
No. You need Windows 2000 professional or Windows XP Professional to run TLA Application Software v5.1.
Numéro de la FAQ56326
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ53961
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55006
When you set-up a "Mark" in a TLA application V5.1 Listing or Waveform window and then add comments to it+ will the comments be included in any printouts of the data?
If you mouse over a mark header the name of the mark and the comments for the mark are shown in a tooltip. The tooltip will be captured if you print the display.
Numéro de la FAQ56201
In a TLA7000 series multi-frame+ why does one mainframe need to be the master?
The master mainframe controls clock distribution used for correlation and controls start/stop synchronization. The master mainframe is also used for the trigger in/out and signal in/out connections.
Numéro de la FAQ56701
Do you have plans to support the TLA Application Software for other Operating Systems?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ56471
What version of mainframe firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TLA7016 mainframe.
Numéro de la FAQ56176
What is maximum number of symbols that can be used?
The number of symbols is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61181
Which cart do you recommend for the TLA7016?
We recommend the K4000 for use with one TLA7016.
Numéro de la FAQ57026
What is the advantage to buying a P6982 probe instead of a P6980 probe?
The P6982 is exactly the same as the P6980 except that it has only one 17-ch probe head so the total number of channels is 17 instead of 34. A customer would order the P6982 if they are only using quarter or half channels for (4x or 2x clocking). In …
Numéro de la FAQ57741
Can I install new modules in my TLA714+ TLA715 portable and TLA720+ TLA721 benchtop mainframes?
Not all the current modules can be used with the older mainframes.  The current modules TLA7Axx and TLA7NAx can be used in the TLA714, TLA720, TLA715, and TLA721 mainframes as long as they are running TLA Application Software v4.4 or above.However …
Numéro de la FAQ60436
Is it possible to save data acquired by a Logic Analyzer as an ascii-file (CSV format). I want a column with timing data+ and a column with ones and zeros.
Yes, you can save acquired data. With the Listing window currently open select export data from the File menu. This will save your acquired data as a .txt file. The data from within the .txt is taken from the Listing Window and the file format is the …
Numéro de la FAQ57436
Have there been any changes to the TLA7QS QuickStart?
There have been no changes to the TLA7QS circuit board. The TLA7QS workbook and software setups have been updated and are still compatible with Version 3.2 or higher of the TLA application software.
Numéro de la FAQ60626
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ54271
After installing the LabView Driver tktla the driver examples and VIs have a broken arrow and several of the subVIs have the error "Invoke Node 'Invoke Node' : contains unwired or bad terminal."
Please make sure .NET 1.1 SP1 is installed. If .NET 2.0 is also installed it is possible there is a conflict between LabView and another application. Try uninstalling .NET 2.0 and then reinstalling the tktla driver. Any VI that was saved after …
Numéro de la FAQ55176
What is the minimum signal amplitude for P6800 or P6900 series probes+ and P6400 series probes?
The minimum signal amplitude for single ended P6800 and P6900 series probes is 300mV peak-to-peak. The minimum differential is Vmax minux Vmin >= 150mV. The minimum signal amplitude for single ended P6400 series probes is 500mV peak-to-peak.
Numéro de la FAQ57821
How many waveforms can be displayed at one time?
The number of individual channel or busform waveforms that can be in any given Waveform window is limited only by the amount of virtual memory in the mainframe. In testing, we stopped adding waveforms at 2,000. The number of waveforms that can be …
Numéro de la FAQ60791
Why does the readout value of the counter/timers when used as a logic analyzer trigger event appear incorrect even though the logic analyzer triggered correctly?
Under certain conditions, when a counter/timer is used as a logic analyzer trigger event, the readout value displayed in the Status Monitor is incorrect even though the logic analyzer triggered correctly. The problem occurs under the following …
Numéro de la FAQ61426
My trigger is set to "trigger immidately" or "If anything then trigger". Why is my memory only half full?
This is because the default trigger position is set to 50% memory before the trigger and 50% memory after the trigger. Since the Logic Analyzer is triggering off the first thing it sees, it does not get a chance to fill up the first 50%. To fix …
Numéro de la FAQ57571
How do I change my TLA7016 from a static IP address to DHCP?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55571
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ54276
Which oscilloscopes are included in the latest iView support?
The TLA application software with iView V6.1.132 or later, supports the following oscilloscopes:TLA iView software >> DownloadPlease contact an Application Engineer in our Support Center if you have further questions that can't be answered here or in …
Numéro de la FAQ61416
What is the maximum number of channel groups?
The number of channel groups is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61276
What is the current version of DSO (digitizing oscilloscope) module firmware and will I need to update it if I install Version 4.4?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61221
Is GbE necessary for the TLA Application Software or will the mainframes work with slower Ethernet infrastructure (e.g.100Mb)
GbE is not necessary. TLA7012 and TLA7016 mainframes will work with 10/100/1000 networks.
Numéro de la FAQ56726
How long does it take to update the mainframe firmware in my TLA7016?
It takes approximately 3 minutes to update the mainframe firmware.
Numéro de la FAQ55741
In the TLA Application how do I load and use a symbol file into my Listing Window or Histogram?
The logic analyzer uses two kinds of symbol files: Pattern symbol files and Range symbol files. The Range symbol files can contain function symbols, variable symbols, source code symbols, and color symbols. For a more thorough explanation of Symbol …
Numéro de la FAQ55846
Can I trigger on multiple busses with time correlation?
Yes, using intermodule signaling.
Numéro de la FAQ59121
How did you achieve the faster backplane in the TLA7000 series mainframes? What are you using?
We fine-tuned bus timings using a newer FPGA design and added enhanced DMA capability.
Numéro de la FAQ56521
Do you have an application note that explains how and when to use a logic analyzer? Is there a tutorial that will show me how to use my logic analyzer?
The XYZ's of Logic Analyzers explains the evolution from the digital oscilloscope to the logic analyzer. It explains the capabilities of a logic analyzer and will you choose the correct tool for your particular application. The Introduction to …
Numéro de la FAQ55406
What is the recommended calibrating interval for your logic analyzers? Do probes need to be calibrated?
We recommend calibrating your logic analyzer every year. Probes do not need to be calibrated.
Numéro de la FAQ57836
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ53571
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ54991
What happened to TLAVu?
Version 4.4 was the last version to have a separate off line viewer. The TLA software v5.0 or above no longer offer the separate TLA offline viewer.  The TLA software itself has integrated with the offline data viewer.  The user will need to install …
Numéro de la FAQ54616
I would like to connect our Logic Analyzer to a Scope with an iView cable. This scope is not in the current list and I am not sure how to add it to the Logic Analyzer system.
Go to System Menu 'Add iView External Oscilloscope? In the next window make sure the box "Show only iVerify compatible oscilloscopes" is not selected. You should be able to select your scope from the list. Hit the Next button and you will see …
Numéro de la FAQ57416
What is the current version of LA (logic analyzer) module firmware and will I need to update it if I install Version 5.1?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61226
Are the P6810+ P6860+ P6864+ P6880+ P6960+ P6962+ P6964+ P6980+ P6982 probes compatible with our Logic Analyzer?
The P6800 and P6900 series probes are not compatible with TLA5200/B series, TLA600 series or TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer modules. They are compatible with TLA7AAx/ABx/NAx/BBx modules.
Numéro de la FAQ57126
Is there a way to write a Linux application to control our Logic Analyzer?
The easiest way to programmatically control a logic analyzer in a Linux/UNIX environment is with a script such as ActivePerl (a variety of Perl that has COM capabilities). If you wish to build a Linux application and have all the features of TPI.NET …
Numéro de la FAQ55896
Can I install new modules in my TLA704 portable and TLA711 benchtop mainframes?
No. You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60431
What is the last supported TLA application software version for the discontinued TLA700 series such as TLA714+ TLA720+ TLA715 and TLA721?
TLA Model Last supported TLA application softwareTLA714 v4.4TLA720* v4.4TLA715 v5.1 SP1TLA721* v5.1 SP1 *note: with the upgrade kit TLA7KUP option 19, the user could upgrade the TLA720 or TLA721 to TLA7016.  After the upgrade, the TLA7016 supports …
Numéro de la FAQ61261
Is TLA Software Application V5.1 Windows Server 2003 compliant?
We have not tested this so operation is not guaranteed. The application has been tested, and is supported on, Windows 2000 Pro and Windows XP Pro platforms (32 bit only).
Numéro de la FAQ56776
My logic analyzer has X amount of memory depth. How many samples is this equal to?
Memory depth in a logic analyzer is the same as the number of samples. For example a module with 512Kb of memory would give you 512K (524,288) samples across every channel.
Numéro de la FAQ57551
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ54326
Can you split the TekLink expansion hub between 2 or more multi-mainframe (Mainframe plus expansion mainframe/s) TLA systems?
No – you will need one TekLink expansion hub for each multi-mainframe system.
Numéro de la FAQ56451
What happens if the network goes down while I am taking an acquisition with a TLA7012 or TLAA7016 and the acquisition completes while disconnected. Can I reconnect and get my data?
If the network connection is lost, you will need to restart the TLA application and the data in the modules will be lost.
Numéro de la FAQ56896
Is there a way to capture LVDS using a P6410+ P6417 or P6418 probe?
The LVDS/TTL to single-ended TTL converter pod will allow the customer to capture low voltage differential signals on the TLA using the P641/P6417/P6418 probe. For detailed electrical characteristic differences please contact Dragonfly Software.
Numéro de la FAQ57506
In the TLA Application can I change a channel polarity?
To Change a Channel polarity:1) In the System window, click the LA Setup button.2) Click Channel Polarity in the Table Shows box.3) Click the button under Probe Channels/Names that corresponds to the channel for which you want to change polarity.
Numéro de la FAQ55836
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55001
Can I merge my TLA700 modules?
It depends whether or not the modules are compatible and only modules with 102 or more channels can merge. The following are the basic rules for merging modules: TLA7Nx modules can be merged together, or with either TLA7Px or TLA7Qx modules. TLA7Nx …
Numéro de la FAQ57146
Is there a way to configure my TLA so that an email is sent when a trigger occurs?
Yes, follow the following steps:Enable Repetitive Run Mode Place the TLA logic analyzer in repetitive run mode by clicking on the repetitive/single run button to the right of the Run button. Access the Repetitive Properties Menu. Click on System and …
Numéro de la FAQ57511
What is the file format for saved data in the new TLA Application Software v5.1? Apparently+ different versions of the App SW have different formats.
The .tla file format changes from release to release. Because of this, we do not publish the .tla file format.
Numéro de la FAQ56941
Did the Performance Verification software change when TLA Application Software v5.1 was introduced?
The Performance Verification software did change a little.  The software for TLA7Lx/Mx/Nx/Px/Qx and TLA7Dx/Ex modules have not been updated to run on a remote PC controller.  If you need to verify one of those modules, you must do so in a TLA7012 or …
Numéro de la FAQ55391
I want the listing to show the system time when triggered in the TLA Application Software. The Timestamp does not display the hours+ minutes or seconds column.
To show the system time the Timestamp Reference must be set to Absolute. Right click the Timestamp column. Go to Properties and choose the column tab. In the Timestamp Reference Box choose Absolute. In the Listing Window move the cursor to the top …
Numéro de la FAQ55816
What is the filename of the file needed to update my TekLink firmware on my TLA7016 or TLA7012?
The file needed to update the TekLink firmware is "TekLink.upd".
Numéro de la FAQ56111
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ52541
I do not want to store consecutive samples. How do I only store the samples that are relevant?
There are a number of ways to store only the samples that you want. Selecting storage none allows one to only store when a state explicitely says to store a sample. Transitional storage only stores a sample if one of the specified channel goups …
Numéro de la FAQ57396
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ53566
Are unused clock or qualifiers usable as data inputs when sampling asynchronously or in timing mode or with an internal clock?
Yes.
Numéro de la FAQ60396
Can I install Windows XP on older TLA’s?
The TLA600 series, TLA704, TLA711, TLA714 and TLA720 are not supported for Windows XP. TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57141
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ52721
How can I locate the MAC address of the TLA7016?
If you know the IP address of the TLA7016, you could try to following commands in the DOS prompt to look up the MAC address.c:\ ping c:\arp -aand you will see MAC address of TLA7016If you do not know the IP address of the TLA7016 …
Numéro de la FAQ59411
What programmatic options do I have to remotely connect to the Logic Analyzer from my Windows OS.
TPI.NET - Provides great flexibility in choices for development languages. Component developers can use any language that supports .NET -- VC++, C#, VB, and others. .NET offers an easy way for developers to create components. COM/DCOM - Supports …
Numéro de la FAQ57886
What happens to my TLA connection when I press the RESET button on the TLA7016 Interface Module's front-panel? Is the acquired data in the modules lost?
Pressing the reset button the Interface Module will cause the network connection to be lost. When this occurs, you will need restart the TLA application and any data in the modules will be lost.
Numéro de la FAQ56901
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ54376
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ53986
Are all my modules supported in your TLA7000 series mainframes (TLA7012+ TLA7016)?
Yes, every logic analyzer and DSO module for the TLA700 series is compatible with the TLA7000 series mainframes.
Numéro de la FAQ55196
For my current TLA714 portable or TLA720 benchtop mainframe+ what upgrades are necessary before I can use the new TLA7PG2 pattern generator module?
You should upgrade all of your TLA700 Series mainframes that will be used together to Version 4.0. Please order TLA7UP Option 11 or download Version 4.0 TLA Application Software for FREE. The FREE software can be located under Resources For You in …
Numéro de la FAQ59341
I would like to automate the acquisitions. How can I repeatedly take acquisitions without user interaction in the TLA Application?
Repetitive Mode allows taking acquisitions repeatedly without user interaction. This can be turned on or off by either clicking on the arrow next to the run button or selecting Repetitive under System->Repetitive. You can change the settings for …
Numéro de la FAQ55821
In my TLA+ why does the timer keep going after I clear it?
Clear timer will always clear the timer to zero but the timer will start over and continue to run. If you want to stop the timer before starting it over then stop the timer in one state and clear the timer in the following state.
Numéro de la FAQ57431
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ52566
How do you save a system with data?
Go to File -> Save System. Make sure the option to save acquired data is checked.
Numéro de la FAQ57356
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ52551
Can I connect flying leads to my P6860+ P6880 or P6419?
Yes, Nexus has an adapter, the NEX-CFLSE & NEX-CFLDF that will allow connection between the connectorless compression probe and Tektronix probe flying leads. Please visit Nexus for details.
Numéro de la FAQ55246
How do I activate the rear panel SVGA output on the TLA714 to drive an external monitor? The Display Adapter and Display control panels do not appear to offer the option+ and the monitor I have connected to the port does not see a signal.
In order to activate an external monitor via the Secondary Video SVGA output you will need to go into the BIOS during startup. Press F2 to go into BIOS (during boot) and go to the advanced menu. Go down to "Silicon Motion Simulscan" and enable it …
Numéro de la FAQ57286
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ52851
I am using a LabView client application to communicate with the Logic Analyzer but am receiving an error 1172 when I try to connect.
Please make sure you can first communicate locally from the logic analyzer. You can use one of the three example VIs that came with the tktla driver available from National Instruments. Also you need to include the TlaNetInterfaces.dll within the …
Numéro de la FAQ55766
Do the TLA mainframes support DHCP?
The TLA mainframes can be configured to support DHCP client capability so that when you connect the TLA to a network, it will automatically acquire an IP address and configure itself accordingly without manual intervention.If a TLA mainframe is on a …
Numéro de la FAQ56466
State VS. Timing - What is a state timing measurement or a timing measurement? What is the difference between internal and external clocking?
For a state measurement the logic analyzer is clocked by a signal from the system under test. At every valid clock, the logic analyzer takes a snapshot of the system under test. This snapshot (sample) is clocked by the system so the measurements are …
Numéro de la FAQ57631
I have connectorless compression probes (P6860+ P6880+ P6419) and need to connect to the Mictor on board. Is there an adapter to do this?
The NEX-HDSWIZ2 is used when there is a Mictor connector on a target that must be connected to Tektronix P6860, P6880 or P6419 compression probe(s). In addition to making this connection, the adapter also provides the ability to rewire the pinout …
Numéro de la FAQ55811
My TLA is running Windows 98. Can I upgrade the TLA SW to the latest version?
The latest version of TLA application software compatible with Windows 98 is V3.2. Version 4.4 of the application software is not compatible with Windows 98 and so the OS must be upgraded to Windows 2000 if you wish to install the latest application …
Numéro de la FAQ57561
The signal mapping of my on board Mictor for P6434 is not equal to the mapping required for the support package. How can I re-wire the signals to meet the support package mapping?
Nexus offers a Adapter called the NEX-HDSWIZ for re-wiring Mictor connectors on a target for connection to Tektronix P6434 High Density Probes. It provides the ability to rewire all 38 connectors. Please visit Nexus for details.
Numéro de la FAQ56011
How do I change my TLA7016 from DHCP to a static IP address?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55576
Can V5.1 of the TLA application SW run on Linux?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ55321
Does the logic analyzer have a constant repetitive trigger mode?
Yes. Select the repetitive trigger mode by either clicking the arrow next to the RUN button or selecting System->Repetitive
Numéro de la FAQ60586
Is it possible to define several trigger conditions using the same channel(s) for these triggers?
Yes.
Numéro de la FAQ60891
What is the Operating System on the TLA7016?
This will depend upon the computer used to control the TLA7016. Customers can use either Windows 2000 Professional or Windows XP Professional machines to control the TLA7016. The TLA7PC1 controller supplied by Tektronix ships with Windows XP …
Numéro de la FAQ56966
Could the logic analyzer with less than 136 channels be used for the 4x clocking mode?
Yes.  However, part of the channels on the probe head would be disable for transferring the signals and used for the storage only.  If you have the TLA7 NA 4/AA4/AB4/AC4/BB4/BC4 modules, you could use the 4X demux probe P6964 which has 4 probe head …
Numéro de la FAQ59196
Is the GbE link on the TLA7012 and TLA7016 Tek proprietary or the industry standard?
The GbE ports on the TLA7012, the TLA7016, and the TLA7PC1 are compliant with industry standards.
Numéro de la FAQ55871
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53561
I would like to get a user guide to run the TLA. Do you have a downloadable PDF file to document how to use your instrument?
Yes, you can download the latest manuals at Tektronix Manuals Finder The TLA Family Quick Start User Manual is a good reference for the TLA Series.
Numéro de la FAQ57421
What is the filename of the file needed to update my mainframe firmware on my TL708EX?
The file needed to update the mainframe firmware on the TL708EX is "TL708EX.upd".
Numéro de la FAQ56096
My memory storage is set to none and the system triggers but the program does not stop running.
In order for the acquisition to complete the entire acquisition buffer must be full. Normally when one triggers the module the rest of the buffer fills very quickly because all samples are stored until the buffer fills (storage set to all). If there …
Numéro de la FAQ57556
Can you create your own trigger in the waveform trigger window in TLA application software V5.1?
No - not at this time.
Numéro de la FAQ55326
What is the trigger latency between mainframes+ when a module (TLA7AA4) from the Master
TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger latency via TekLink cable is 161ns plus 1 sample. TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger via TL708EX is 186ns plus one sample.
Numéro de la FAQ64221
Is Windows XP available on any TLA?
Currently Windows XP is the operating system on TLA7012 and TLA7016 mainframes and the TLA5200B series logic analyzers.TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57546
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ53556
Could I use the qualifier channel as the external clock?
No.  You can not setup the qualifier as the clock channel.  However, you could plug in a different probe slot to make sure it has the clock channel instead of the qualifier channel.  Both of the clock and qualifier channel could be used as a data …
Numéro de la FAQ59191
What is the Maximum state acquisition offered by the TLA7Axx?
The TLA7Axx offers up to 800MHz sampling rate in Half Channel mode and 625MHz DDR in quarter channel mode.
Numéro de la FAQ57801
Can the automated measurements available in TLA application V5.1 be pulled out of the LA?
Yes, there is an export button in the measurement dialog that will export the statistics table to a file of type text or csv format.
Numéro de la FAQ55291
Is there a convenient way to functionally test logic analyzer probes?
Nexus, a partner of ours, offers an accessory called NEX-PROBETESTER2. It is compatible with P6400, P6800 and P6900 series probes and is capable of testing up to 32 data channels and a pair of clock/qualifier lines. For more information go to: …
Numéro de la FAQ57486
What is the maximum bus width that can be monitored?
You can combine modules using the special high-speed connectors on the side of each logic analyzer module so that all channels operate from a single timebase. This is called "module merging." All channels may be contained within a single channel …
Numéro de la FAQ61266
Were there any improvements made to the TLATPI (Tektronix Programmatic Interface) in Version 4.4?
Please refer to the TLA Family Logic Analyzer Release Notes (ReleaseNotes.doc). If you use TLATPI on a remote machine, you must use the same version of TLA Application Software as the TPI Client Software; otherwise you may experience compatibility …
Numéro de la FAQ61076
My iView cable is too short to attach the PC to the TLA7016. Do I need a different cable?
One can choose to use a TLAPC1 in these cases. The TLAPC1 is designed to be placed on top of a TLA7016 mainframe in close proximity, thus allowing usage of the iView cable in its current configuration
Numéro de la FAQ55936
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ54386
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53581
How long is the Teklink cable?
2 meters
Numéro de la FAQ56636
Is there an adapter for the P6960 probe to the Mictor connector on board?
Yes, Nexus makes an adapter (NEX-M2P69X) that will allow a P6960 probe to connect to the mictor connection on the board. Please visit Nexus for details
Numéro de la FAQ57526
How do you take a screen capture on the TLA?
SnagIt made by TechSmith comes with every current logic analyzer portable and mainframe and on the application CDs for version 4.2 of the application software and later. This tool is used for all your screen capture needs. SnagIt will allow you to …
Numéro de la FAQ57361
Will my older TLA7Lx and TLA7Mx logic analyzer modules or TLA7Dx and TLA7Ex digitizing oscilloscope modules work in the new TLA7012 portable or TLA7016 benchtop mainframes?
Yes, but you must reflash the firmware on your modules with the new Version 5.1 compatible firmware located on your TLA mainframe hard disk.If any module that is not running Version 5.1 compatible firmware is installed in a TLA mainframe running …
Numéro de la FAQ56321
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ52856
How do I stop/disable the TLA Application V5.1 from automatically starting up after booting the TLA?
From the TLA Application go to the System Menu->Options->Startup Tab. There is an option to Disable starting the TLA Application on login.
Numéro de la FAQ55726
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ54001
How can I get the features of the new TLA715 portable or TLA721 benchtop mainframes (e.g.+ faster CPU+ internal CD-ROM+ USB+ etc.) in my existing TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60656
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ53806
In the TLA Application Software Listing Window I would like to know the State for each acquired sample (Trigger State Machine).
Go the the Setup window and add a new Group. Then add the status bits to this group. They are located at the bottom of the section called "Probe Channels/Names". Now right click the new Group Name for your status bits and choose "Select Status Bits …
Numéro de la FAQ55856
How can I enable the compound clocking in the TLA application software v5.6?
The compound clocking is not implemented in the v5.6 software yet.  If you need compound clocking, you will need to use the v5.1 SP1 software.  However, if you have a saved setup file created in v5.1 SP1 software, you will still be able to use the …
Numéro de la FAQ59396
How does the logic analyzer implement transitional timing?
All data is sampled using the logic analyzer's internal sample clock that can be varied from the minimum sample interval of 2ns to 50 msec. Transitional Storage mode works when using either internal or external clocking. The Storage feature in the LA …
Numéro de la FAQ60761
Where can I found an installation instruction and an oscilloscopes compatibility list for the iView cable?
In the TLA application software, go to "System" -> "Add iView External Oscilloscope" to see the list of oscilloscopes supported by the TLA and the installation instructions.
Numéro de la FAQ60196
In the TLA Application how do I combine the setups from my unmerged modules into a new setup for my merged module system?
First Export the individual setups from each module. For each module open its Setup Window, go to the File menu and select Export Channel Setup. After you have exported every module setup, merge the system (Both physically and then logically by going …
Numéro de la FAQ55841
What version of TekLink firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TekLink firmware on the TLA7016.
Numéro de la FAQ56181
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ52906
What is the replacement for the TLA7AAx+ TLAABx or TLA7NAx module?
The TLA7ACx is the direct replacement for the TLA7AAx, TLA7ABx or the TLA7NAx module.  It comes standard with the fix channels assignment for the analog mux (the 4 BNC analog outputs).  With the option AM, it will enable the fully implemented analog …
Numéro de la FAQ60101
How do I determine how much memory is installed in my Logic Analyzer?
Within the TLA Application software go to System -> System Properties -> Select LA X tab.
Numéro de la FAQ57306
What is TekLink?
It is an instrument interconnection interface. Currently TekLink 1.0 is implemented on the Logic Analyzer mainframe TLA7012 and TLA7016 for interconnection between the expansion mainframe.  TekLink 2.0 is implemented on the DPO/DSA70KB.  It is used …
Numéro de la FAQ61196
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ52961
How long does it take to update the TekLink firmware in my TLA7016?
It takes approximately 4 minutes to update the TekLink firmware.
Numéro de la FAQ55746
How much hard disk space is used by the TLA application & Windows 2000 Professional?
As delivered, your TLA700 system has approximately 1.1 GB of disk space used by the Windows operating system, utilities, and the TLA application files.
Numéro de la FAQ60796
It takes a long time for the TLA Connection Window in the TLA Application to find my logic analyzers. Can I speed this time up?
If your network does not have DNS it will take longer for the Application to translate hostnames into IP addresses. To eliminate this search time it is recommended to include a HOSTS file on your PC under the Windows folder->system32->drivers->etc …
Numéro de la FAQ55916
Is there any way to get simultaneous LA and DSO acquisition without having to double-probe?
Yes, if you have a TLA7Axx you can use the 4 analog outputs to get simultaneous analog and digital measurements. However, the TLA7Axx is currently the only LA that supports analog and digital measurements through a single probe.The TLA7Axx iView …
Numéro de la FAQ59731
Will the TLA application software run on a regular PC so I can perform off-line setups and off-line analysis of data?
TLA software v5.0 and v5.1 can be loaded on a PC using Windows 2000 and XP. You will be able to perform off-line setups and off-line analysis of data as well as remote control of the TLA mainframe.  TLA software v5.6 and v5.7 works only with Windows …
Numéro de la FAQ61466
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on …
Numéro de la FAQ55686
Can a TLA be rebooted remotely?
Windows XP remote desk top (RDT) can be used to remotely reboot a machine. There is no planned way to turn on a machine remotely.
Numéro de la FAQ56366
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ54986
Does an application exist to convert waveform data or .prn files to pdf or another windows format?
There are third party converters available to convert .prn files to pdf. You can find these applications by searching for them in google. All versions of TLA SW 4.2 and later (not including web install) include SnagIt which can capture a picture of …
Numéro de la FAQ57236
What is MagniView?
MagniVu data is the result of asynchronous digital oversampling architecture. This data is automatically acquired whenever you perform an acquisition. This means that, even if you specify synchronous (state) acquisition, you can view the asynchronous …
Numéro de la FAQ57726
I am using TPI.NET to load a saved system. When I load a system the Listing Window reverts any saved changes back to the default settings. Why does it behave this way?
When a module is loaded, the TLA SW application does not assume that the new module setup will have the same channel groups as the previouse setup. Therefore all the Waveform traces and Listing columns associated with data from the previous modules …
Numéro de la FAQ57391
How closely matched are the P6400 series probes?
The time delay specifications are the same on every P6400 series probe (P6410,P6417, P6418, P6419 and P6434 probes). This allows you to mix probe types on the same logic analyzer, thereby preserving accurate data correlation from the probe tip of …
Numéro de la FAQ60671
How do I rackmount my TLA mainframe?
Rackmount kits are available for the TLA600, TLA5000 and TLA700 Series. You can find order details for the rackmount kit in the TLA600, TLA5000 and TLA700 series product information data sheet. In the data sheet for the TLA5000 series, it is located …
Numéro de la FAQ60726
Are channels reduced when the sample rate is 8 GHz?
No. The 8 GHz sampling provided by MagniVu is available on all channels, all of the time through the same probe simultaneous with up to 800 MHz* state timing. *Sample rate and state timing limits depend on Logic Analyzer model and ordered options.
Numéro de la FAQ60336
Is there a new version of TLAVu? All I can find is v4.4 and v3.2.
TLAVu no longer exists. Instead, we integrate the offline data viewer into the TLA software itself.  To use the offline data viewer, simply run the TLA software on the regular PC in offline mode.  The latest TLA software is available at www.tek.com …
Numéro de la FAQ52946
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ52591
Where do I find what version of TLA Application Software I currently have?
The version number can be found from within the TLA Application under System Properties in the System menu.
Numéro de la FAQ61411
Is there an expansion mainframe available for my TLA mainframe?
Yes, the TLA7XM Expansion Mainframe which extends the TLA714 or TLA715 portable mainframe from 2 to 24 modules and the TLA720 or TLA721 benchtop mainframe from 5 to 60 modules. Please refer to the TLA700 Series section for further details.
Numéro de la FAQ60936
Does the enhanced monitor firmware need to be updated if I'm upgrading my TLA7016 from v5.0 to v5.1?
No. The enhanced monitor only needs to be updated if you are converting a TLA720 or TLA721 to a TLA7016 using TLA7UP option 19.
Numéro de la FAQ55416
What is the filename of the file needed to update my mainframe firmware on my TLA7012?
The file needed to update the mainframe firmware on the TLA7012 is "TLA7012.upd".
Numéro de la FAQ56101
When connected to the LAN and using the remote host mode in the TLA Application Software how does it find the mainframe or if there are several mainframes on the LAN how does it identify the specific mainframe you're looking for?
There is a connection dialog that is used that can display TLA's on the network, can search for TLA's connected to a network, or can automatically connect to a TLA of the users choice. The connection dialog shows IP address or host name of the TLA's …
Numéro de la FAQ56186
Is the name of the TLA available over TPI.NET?
No. TPI.NET does not provide the names of TLA’s on a network, nor does it provide the name of the TLA to which a client is currently connected.
Numéro de la FAQ56741
Where can I find the LabView drivers for my logic analyzer?
LabView drivers are downloadable from National Instruments Instrument Driver Network. You can download them from the website or if using LabView 8.0 or later open LabView and go to Help->Find instrument Drivers and enter tktla for the keyword.
Numéro de la FAQ56211
Can setups and data be shared between the TLA600 Series and the TLA700 Series?
Yes, you can easily share both seteups and data.
Numéro de la FAQ60481
What is the maximum channel group name length?
There is no limit to the channel group name length.
Numéro de la FAQ61271
Do the TLA700/7000 Series Logic Analyzers Series use VXI technology?
Yes, however, the TLA700/7000 Series Logic Analyzers do not allow any non TLA700/7000 modules to be used nor can the TLA700/7000 Series mainframes be used as a VXI mainframe. 
Numéro de la FAQ60541
While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?
Highlight state 1 in the Overview section of the trigger window. The Overview section is at the left section of the Trigger window. Right click on State 1 and "add state". New state is now after State 1. Right click on State 1 again and "cut state" …
Numéro de la FAQ58996
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53576
How do I attach the connectorless compression probe to the design board?
There are two methods to connect the compression probe to the design board. One may use a Nut Block for PCB's .050'' to .093'' thick. The Nut Block may be easily removed. For PCB's .093'' to .250'' thick the Press-in Nuts are used.
Numéro de la FAQ57296
Can the TLA assert a hardware interrupt on my target system?
Yes, using either the Trigger Out or Signal Out connectors, both of which are TTL-compatible outputs, back-terminated into 50 ohms.
Numéro de la FAQ60521
Will the older Oscilloscope TLA7Dx and TLA7Dx modules work in the new mainframes?
Yes. The TLA7Dx and TLA7Ex Oscilloscope modules will work in the TLA7012 and the TLA7016. All existing TLA700 series modules will work in the new mainframes.
Numéro de la FAQ57086
How do I set up a trigger and what resources and strategies are available for creating my own triggers?
A large number of trigger resources are available that make it possible to trigger at just the right time and store just the right data. Setting up these resources can be challenging for a new user. To minimize this effort a feature called Easy …
Numéro de la FAQ58286
Is there a way in the TLA Application Software to do performance analysis? I need to know how often my bus or group is in certain ranges.
Use the Histogram window to set up, capture, and display performance analysis data from an LA module channel group, counter, or timer. Each Histogram window displays address ranges and the corresponding counts, percentages, and histogram bars based …
Numéro de la FAQ55891
Can multiple clock sources be acquired using a single logic analyzer?
Yes, multiple clock sources can be acquired using a single logic analyzer as long as the active clock edges are the minimum sample time (either 2ns or 4ns depending on module model). *Minimum sample interval is 4ns for TLA6xx Series, TLA704 and older …
Numéro de la FAQ60471
What probes can be used with the TLA7NAx+ TLA7Axx or TLA7BBx modules?
The following probes can be used with the TLA7NAx, TLA7Axx or TLA7BBx modules: P6810, P6860, P6864, P6880, P6960, P6962, P6964, P6980 and P6982.
Numéro de la FAQ57881
Is there ever going to be a mechanical (new processor board) upgrade path for the TLA715?
We will not be offering a processor board upgrade for the TLA715. Current TLA715 customers can upgrade to v5.1 of the TLA Software Application and take advantage of the new remote hosted mode to use an external (faster) PC to run the TLA software …
Numéro de la FAQ56771
I connected the Trigger Out from my logic analyzer to my Oscilloscope but it does not send a trigger pulse to the scope. What could be the problem with the logic analyzer?
One can turn off the System Trigger Out on the Logic Analyzer. Please check this setting from: System -> System Trigger... Check the box for Enable System Trigger Out.
Numéro de la FAQ55791
I cannot connect to my TLA7012 or TLA7016 remotely with remote host mode.
There are a number of reasons why you might not be able to connect via the remote host mode. Perform the following checks: (TLA7012 Only) Check to determine the TLA Server is on. This is automatically turned off upon restart. You can find it in the …
Numéro de la FAQ55776
Can you disconnect someone from the TLA (i.e. if they are using remote desktop)?
No. The connection dialog will show who is connected to a TLA and disconnection requires personal interaction from that person.
Numéro de la FAQ56446
I would like to design our connectorless compression (P6860+ P6880+ P6864+ P6419) probe footprints to reduce the circuit board area by half? Can the probes be modified to do this?
Yes, Nexus makes a compression probe head adapter (NEX-2X-PROBE) that allows probes to be placed on opposite sides of the board back-to-back. This reduces the circuit board area needed by half. The holes needed for a 17 channel probe can be used for …
Numéro de la FAQ55826
Will we still have fast inter-module communications in TLA Application Software v5.1 (such as the triggers/control signals) that can be quickly communicated between modules like in previous versions of the Application SW?
Within the mainframe, the internal signaling is the same as before.
Numéro de la FAQ57091
Why can't I connect remotely to my TLA7012 to update the firmware?
Firmware updating for the TLA7012 needs to be done locally.
Numéro de la FAQ56246
Will a DVI to VGA adapter ship with every TLA7012 mainframe?
Yes, each TLA7012 will ship with a DVI-to-VGA adapter; however, customers wishing to use an analog monitor with the TLA7012 will need to supply their own VGA cable.To use a TLA7012 with an analog monitor, the DVI cable or adapter should be attached …
Numéro de la FAQ56316
Are there example LabView VIs available?
The National Instrument Driver tktla is available at their Instrument Driver Network. It contains three examples for using their driver. If using LabView 8.0 you will need to search for them using the NI Example Finder once the driver is installed …
Numéro de la FAQ55211
Can you automate control of the TLA from a Linux system?
There are a couple of options that you have depending on what you want to do. If you want to control the desktop of the TLA from your Linux box, it is suggested that you use VNC. This can be found at http://www.realvnc.com/ . If you want to …
Numéro de la FAQ57206
Why do I get a "IP read error" on the screen of my TLA?
The network factory default for the TLA7016 is DHCP. The TLA is expecting to see a DHCP server on your network and it isn't seeing one. To fix this, make sure that it can communicate with a DHCP server or set it to a static IP address. For more …
Numéro de la FAQ57036
In the TLA Application Software when setting up my trigger+ I would like to setup a trigger event when my Group goes High or Low.
Using the Goes High or Goes Low event is only available by selecting a channel. If your group is made up of one channel then find the channel associated with the group in your channel setup. In the Power Trigger clause definition choose "If channel" …
Numéro de la FAQ55861
What supports and capabilities are there for RapidIO and Serial RapidIO?
The Tektronix TMS805 application support package facilitates the testing of 8 and 16-bit RapidIO rates up to 1 Gb/s. Nexus offers the NEX-SRIO support package for support up to 3.125 Gbps for their Serial RapidIO solution. Please see Nexus for …
Numéro de la FAQ56166
How can I get more DRAM or a bigger hard disk in my TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60651
What is the filename of the file needed to update my mainframe firmware on my TLA7016?
The file needed to update the mainframe firmware on the TLA7016 is "TLA7016.upd".
Numéro de la FAQ56106
Are iView Cable Rev A and Rev B compatible with the current versions of the Application software?
Yes, both Rev. A and Rev. B of the iView Cable are compatible with the most current National Instrument driver available on the v4.4 Application CD.
Numéro de la FAQ57116
Can I boot Windows XP on my TLA7012 or TLA7PC1 from a USB attached hard drive?
Windows does not support booting from USB devices. For further information: http://www.microsoft.com/whdc/device/storage/usb-boot.mspx
Numéro de la FAQ56376
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ53736
Is there an adapter for the connectorless compression probes (P6419+ P6860+ P6880) to the mictor connector?
Yes, Tektronix makes an optional probe accessory called the 34 CH MICTOR-ON-PCB TO P6860/80 COMPRESSION ADAPTER.
Numéro de la FAQ57521
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ52971
Can a data or channel group be displayed twice with different display formats?
Yes. Channels and groups may be displayed as Hex, Octal, Binary, Decimal, Signed Decimal or Symbolic. One can display a group two or more times in these formats.
Numéro de la FAQ60401
Will the files that I saved in previous versions of the TLA Application Software correctly load into v5.1?
Yes, all TLA Family save from V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4 or V5.0 systems will load properly on V5.1 systems.The V5.1 save files will not load onto V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4, or V5.0 …
Numéro de la FAQ61456
Can I compare two data acquisitions?
Yes, first you must define the data to compare by setting up the Define Compare dialog box. Go to the LA Setup window and then click the Compare button near the top right corner of the setup. In the Define Compare dialog box you will specify the …
Numéro de la FAQ57136
TLAVu is not installing. It says I need a mainframe.
You are installing the TLA Application software and not TLAVu. Check CD #2 for TLAVu or download it from www.tek.com.
Numéro de la FAQ57651
I want to save ink when I print a waveform. How do I change to a light background color in the waveform display?
Printing a waveform with the default dark background can use up a lot of ink. You can easily change the color scheme to a dark waveform on a light background. First, right click on a waveform in a waveform display and bring up the properties page …
Numéro de la FAQ58431
Is there any way to show the sample with the corresponding trigger program state in the listing or waveform?
Yes, in the TLA System Setup window add another probe group with your desired name such as State. Now add the Status Bits as the probe channels. Finally right click on the group and choose Select Status Bits Type… Choose Trigger State Machine (TSM) …
Numéro de la FAQ57541
How do I transfer from the logic analyzer to a VHDL or Verilog simulator?
Tektronix has added support for SynaptiCAD's products to its line of logic analyzers and pattern generators. The new Tektronix TLA600 and TLA700 Series logic analyzers can capture waveform data in a form that can be read by WaveFormer, VeriLogger …
Numéro de la FAQ60741
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ54996
How do I update the TLA firmware?
must power down the logic analyzer to allow the TLA application to start upproperly.TLA700 Series Logic Analyzers and ModulesIf you need to upgrade the firmware on your logic analyzer modules, a startupmessage appears telling you that you need to …
Numéro de la FAQ57336
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ52386
In the TLA Application I am writing a power trigger and the program does not let me add more than four clauses in a state. I have another trigger program that lets me define up to 8 clauses per state. What trigger program rule am I breaking?
Each state is made up of one or more clauses. If you use more than four triggerevent resources in a state, you can have up to four clauses per state. If you havefour or fewer trigger event resources in a state, you can define up to 16 clausesper …
Numéro de la FAQ55851
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ55146
Where can I find DDRI and DDRII support?
Nexus provides a variety of DDRI and DDRII supports including DDRII support up to 667MHz. Note: They may have faster, newer supports so please visit Nexus for their latest DDR support details.  
Numéro de la FAQ56206
Will my current processor/bus support packages work with Version 5.1?
All TMSXXX support packages introduced prior to Version 5.1 have either Version 1.0, 1.1, 2.0, 3.0, 3.1, 3.2, 4.0, 4.2, 4.3, or 4.4 setup files on the factory-supplied disks that are forward compatible with Version 5.1.All TMSXXX processor/bus …
Numéro de la FAQ61441
I get a message that says "The version of NI-488.2 for Windows does not support the obsolete GPIB-USB you are attempting to install. Contact National Instruments for details on upgrading to a new GPIB-USB revision" when I plug in the iView cable. How do I fix this?
If you get this message, you have an older GPIB-USB cable. You need to have National Instruments 488.2 software v2.3 to get this to work. It can be found on the TLA Application software v5.1 CDs. Anything greater than v2.3 will not support all …
Numéro de la FAQ55796
TLA7000 Logic Analyzers

Numéro du document : 52W-15053-22
Datasheet
TLA7016
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.


Numéro de référence : 077004100
Déclassification
TPI.NET Instructions
TIP.NET


Numéro de référence : 077135300
Programmation
TLA700/7000 Series
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair


Numéro de référence : 077003702
Déclassification
Tektronix Supplemental, 071329504
Product Information Sheet for the People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Numéro de référence : 071329504
Utilisateur
TLA7BXX Series
Logic Analyzer Modules Declassification & Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077014601
Déclassification
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259106
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259105
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259104
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document supports TLA Application Software V6.1 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157506
Utilisateur principal
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174706
Utilisateur/Service combiné
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015801
Service
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.1 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003207
Aide en ligne
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014801
Vérification des performances
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.0 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259103
Utilisateur/Service combiné
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.0 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003206
Aide en ligne
Tektronix
Logic Analyzer Family Quick Start User Manual.

This document supports TLA Application Software V6.0 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157505
Utilisateur principal
020-2664-01
TLA6400 Series Logic Analyzer & TLA7012 Portable Mainframe Rackmount Kit Instructions

This document supports TLA application software V6.0 and above. This document contains information to install a TLA7012, TLA6200 series logic analyzer, or TLA6400 series logic analyzer in an instrument rack.
Numéro de référence : 071175001
Instructions d’installation sur site
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014800
Vérification des performances
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015800
Service
Tektronix Logic Analyzer Series
Product Specifications & Performance Verification Technical Reference

Supports TLA SW 5.6+. This document contains product specifications for several of the TLA products. It also procedures for verifying the performance of the TLA products.
Numéro de référence : 077176303
Vérification des performances
Tektronix Logic Analyzer
Online Help Software Version 5.8 Online Help

This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003205
Aide en ligne
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174705
Utilisateur/Service combiné
TLA Family
Product Safety & Compliance Instructions

This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA5200B Series Logic Analyzer products.
Numéro de référence : 071259102
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157504
Utilisateur principal
TLA Pattern Generator Programmatic Interface, Rev A
PPI Online Help Online Help

The Pattern Generator Programmatic Interface (PPI) is based on COM/DCOM and has been deprecated.
Numéro de référence : 077039600
Aide en ligne
TLA Programmatic Interface, Rev A
TPI Online Help Online Help

Use these instructions to remotely control a TLA logic analyzer using TPI.com. The TPI.(COM/DCOM) interface has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077039700
Aide en ligne
TLA7BXX
Logic Analyzer Modules Service Manual

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 077014700
Service
TLA7KUP
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 077174904
Instructions d’installation sur site
TLAScript, Rev A
Graphical Interface Online Help

The TLAScript software (COM/DCOM) has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077003400
Aide en ligne
TLA7KUP Instructions
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071174903
Instructions d’installation sur site
TLA7012 Rev A
Tektronix Logic Analyzer Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077003900
Déclassification
TLA7000 Series Installation Manual
Logic Analyzers Installation Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071174703
Utilisateur
TLASWUP Instructions
Software Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 075086003
Instructions d’installation sur site
TLA708EX TekLink Instructions
8-Port Instrument Hub and Expander Instructions

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071176501
Utilisateur
TLA7000 Series Technical Reference
Mainframe Technical Reference

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 071176400
Service
020-2369-02 Instructions
TLA72X, TLA7XM, TLA7016 Benchtop Mainframe Rackmount Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071089701
Instructions d’installation sur site
020-2644-00 Instructions
TLA7012 Portable Mainframe Logic Analyzer Rackmount Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071175000
Instructions d’installation sur site
TLA iView Update, V6.1.137
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4104C

Numéro de référence : 066043922
Application
TLA iView update V6.1.134
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: DPO2012B, DPO2014B …

Numéro de référence : 066043921
Application
TLA iView update V6.1.132
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO3012, MDO3014 …

Numéro de référence : 066043920
Application
TLA iView update V6.1.129
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4014B-3, MDO4034B …

Numéro de référence : 066043919
Mettre à jour
TLA Application Software V6.1.127
New feature release includes data import (TDI), MSO/MDO digital channel support, iView over Ethernet, auto-threshold, single-install for PCIe3 support and other enhancements. Includes improvements to stability and functionality. See ReleaseNotes …

Numéro de référence : 066037131
Application
TLACAL PERFORMANCE VERIFICATION SOFTWARE V6.0.213
TLACal is calibration, performance verification and deskew adjust software for LA modules and their compatible probes.

Numéro de référence : 066132703
Utilitaires
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE, V2.4.151
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V5.8.151 TLA Application.

Numéro de référence : 066044538
Application
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE V6.0.267.0
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V6.0.267 TLA Application.

Numéro de référence : 066044539
Application
TLA Application Software V6.0.267
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.Includes firmware updates to TLA7Ax and TLA7Bx modules.Includes iView(TM) support for Tektronix MDO4054, MDO4104, MSO72004 …

Numéro de référence : 066037129
Application
TLA Application Software V5.8.151
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.

Includes firmware updates to TLA7Ax and TLA7Bx modules.

Includes iView(TM) support for Tektronix MDO4054 …

Numéro de référence : 066037128
Application
DSI and CSI2 support software V1.1.025
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132701
Application
DSI and CSI2 support software V1.0.003.1
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132700
Application
TLA iView update
This is an update to the iView support that was released with TLA Software V5.8.027 or earlier. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: TDS2001C …

Numéro de référence : 066043918
Mettre à jour
TLA Application Software
Includes support for TLA6000 Series Logic Analyzers.Includes support for Compound Clocking (multiple clocks and qualifiers, formerly known as Advanced Clocking Mode) in the LA Setup window.Provides an updated firmware image for the TLA7Bxx modules …

Numéro de référence : 066037122
Application
TLA Application Software V5.6.754
Includes support for new TLA7ACx, TLA7BBx, and TLA7BC4 modules.The LA Setup window has been redesigned for improved usability.A new version of TekVISA(TM) provides significant improvements in the area of network connectivity.It cannot be installed on …

Numéro de référence : 066037119
Application
TLA7S08-S16 PCI EXPRESS SUPPORT SOFTWARE v2.0231.1
This is version 2.0.231.1 of the PCI Express support package used with TLA7S08 and TLA7S16 modules.

Numéro de référence : 066044534
Application
TLA TO RSA CONVERSION TOOL
This plug-in tool is designed to run within the TLA Application Software to convert an acquired digital I & Q signal for loading into a Tektronix Real-Time Spectrum Analyzer, or the RSAVu offline software, enabling modulation analysis to be performed …

Numéro de référence : 066100700
Utilitaires
TLA APPLICATION REGISTRY PATCH
This patch should be applied to all TLA700 and TLA7000 products, and all PCs after V5.1 SP1 of the TLA Software Application (WebID 5177) has been installed. It corrects a registry setting that can cause application errors when acquiring glitches.

Numéro de référence : 066085900
Application
TLA APPLICATION SOFTWARE V5.1 SP1
This release is a full maintenance release of the TLA Software Application. After installing, the TLA APPLICATION REGISTRY PATCH (WebID 5360) should also be installed. This release also adds iView support for TDS1000B/TDS200B, TDS1001/TDS2004 …

Numéro de référence : 066037106
Application
Tektronix / FS2 - Collaboration on real-time logic debug solution for Xilinx FPGAs
Article produit
Tektronix delivers complete DDR memory test bench
Article produit
Tektronix and FS2 Answer Debug Challenges for Altera FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Altera FPGA and surrounding hardware.

Numéro du document : 52W-19639-0
Fiche d’informations
Verify and debug DDR2 memory systems
Dossier technique
Tektronix and FS2 Answer Debug Challenges for Xilinx FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Xilinx FPGA and surrounding hardware.

Numéro du document : 52W-20066-0
Fiche d’informations
Tektronix develops comprehensive test for Intel QuickPath interconnect
Article produit
Companies Collaborate on Debug software for Altera FPGAs
Article produit
Command & Protocol Verification of DDR+ DDR2+ and DDR3 SDRAM
Computer memories are not the only systems that continue to demand larger, faster, lower powered and physically smaller memories. Embedded systems design applications have similar requirements. This application note highlights the power of the logic …

Numéro du document : 52W-19236-2
Note d’application
Cross-bus Analysis Reveals Interactions and Speeds Troubleshooting
Cross-bus analysis has become an indispensable troubleshooting methodology. This application note discusses how the powerful new logic analysis solution from Tektronix can speed your cross-bus troubleshooting requirements

Numéro du document : 52W-21073-0
Note d’application
Introduction to Mixed Signal Test Solutions
As the complexity of today’s electronic designs rises with the increase in digital and serial content, the boundaries that define the optimum piece of test equipment can become unclear. Engineers are working with “mixed-signal” designs, which contain …

Numéro du document : 3GT-20213-3
Livre blanc
Timing Error Debugging
New Designs, New HeadachesNew digital devices have become progressively more powerful by incorporating high-speed buses, subsystems, and logic families. They have also become more complex, more sensitive to signal quality, and more time consuming to …

Numéro du document : 55W-18497-0
Note d’application
On the Bleeding Edge: Tektronix Logic Analyzers Enable Tundra Semiconductor to Develop First RapidIO Switches and Get to Market Faster
Challenge: Design, verify and debug the industry’s first silicon switches supporting parallel and serial RapidIO® Solution: Tektronix TLA7000 Series logic analyzer with TMS805 RapidIO application support package that enables 800 MHz state …
Étude de cas
Faster Logic Analyzer Mainframes+ New Software Speed Debugging
Article produit
Test methodologies for high-speed serial designs
Article produit
EDN Selects Tektronix Logic Analyzer as Finalist for Innovation of the Year
Prix
Simplifying Xilinx and Altera Debug
This application note focuses on the issues and techniques that can help you become more efficient when debugging your FPGA systems.

Numéro du document : 52W-20065-3
Note d’application
Suggested Clocking Modes for Acquiring Flash and DRAM Memories with a TLA Series Logic Analyzer
An analysis of ST Microelectronics' M58WR064EB Flash memory and Micron Technology's MT48H4M16LFSynchronous DRAM shows that a fairly fast sampling speed will be required to capture all the signals of interestwith adequate resolution. The obvious …

Numéro du document : 52-19153-0
Note d’application
Serial Analyzers for PCIe 2.0 Provide Power Management and Cross Bus Analysis
Article produit
New Tektronix Logic Analyzer Named to Hot 100 List
Prix
Debugging Timing Problems with a Logic Analyzer
In today’s digital world, embedded systems designs are more complex than ever. With the use of faster speeds, lower power devices and more powerful logic, they are becoming increasingly sensitive to signal integrity issues. This application note will …

Numéro du document : 52W-23621-0
Fiche d’informations
Serial analyzers support PCI Express 2.0
Article produit
Serial analyzers add to comprehensive PCI Express 2.0 testing
Article produit
Logic Analyzer Fundamentals
Like so many electronic test and measurement tools, a logic analyzer is a solution to a particular class of problems. It is a versatile tool that can help you with digital hardware debug, design verification, and embedded software debug. The logic …

Numéro du document : 52W-14266-5
Guide de présentation
Select the Correct Debug Methodology for Your Altera FPGA Design
Debug can on average take up to 50% of the development time, particularly when looking for a difficult issue. We therefore need to use innovative ways to speed up the flow. Tektronix, First Silicon Solutions (FS2), and Alterahave teamed up to provide …

Numéro du document : 54W-21382-0
Note d’application
Serial Analyzers Deliver Comprehensive PCIe Testing
Article produit
Logic Analyzer Triggering Techniques to Capture Elusive Problems
For digital designers who need to verify and debug their product designs, logic analyzers provide breakthrough triggering features that capture real-time digital system operation. This application note explains how to use logic analyzer triggering to …

Numéro du document : 52W-18368-0
Note d’application
Logic analyzer goes PCI Express
Article produit
Understanding and Performing RapidIO Testing
RapidIO architecture delivers significantly increased transmission speeds to enable the design of next-generation networking and communications equipment, but with it comes compliance and interoperability issues. Tektronix comprehensive tool set …

Numéro du document : 5AW-16056-0
Note d’application
Real-time Debugging Measures Signals Without Recompiling
Article produit
Quick Signal Integrity Troubleshooting with Integrated Logic Analyzers & Oscilloscopes
Fast product development requires fast and efficient troubleshooting of signal integrity problems. Signal integrity is a growing priority as digital system designers pursue ever-higher clock and data rates in their designs. To ensure signal integrity …

Numéro du document : 58W-17254-1
Note d’application
RapidIO Architecture: Building the Next-Generation Networking Infrastructure
RapidIO®, a high-performance, packet-switched bus technology, delivers the bandwidth, software independence, fault tolerance and low latency needed for the design of next-generation networking equipment in the communications market.

Numéro du document : 5AW-16056-0
Dossier technique
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets – computers, cell phones, entertainment systems …

Numéro du document : 55C-16736-3
Guide de présentation
The installation manual for TLA Application Software v5.1 says that I may need to update the bridge driver. How do I know if I need to or not?
If you are upgrading from v4.0 to v4.4 to v5.1, then you need to upgrade the bridge driver. If you have v5.0, then it will be upgraded automatically when you install v5.1.
Numéro de la FAQ55996
What is the delay of a signal out from a TLA7000 series mainframe to a scope?
This data will be published in spring 2006.
Numéro de la FAQ56926
Is there an adapter for connecting my connectorless compression (P6860+ P6880+ P6864+ P6419) probes to the Agilent E5378A or E5379A probe footprint?
Yes, Nexus makes adapters for connecting Tektronix P6860, P6880 and P6419 probes to Agilent probe footprints. There are different models of NEX-SAMXX adapters for both single-ended and differential probes. Please visit Nexus for details.
Numéro de la FAQ55901
How many trigger resources can be used in a single trigger program?
A trigger program is made up of one or more states up to 16. Only one state is active at a time. Each state is made up of one or more clauses. If you use more than four trigger event resources in a state, you can have up to four clauses per state …
Numéro de la FAQ60786
My trigger program will not stop running. Why will it not trigger?
Check the status monitor to see if the program is stuck in an undesired state. Check to see if the program has triggered or reached the trigger state. Remember, a trigger program must contain a trigger or the program will not complete even if the …
Numéro de la FAQ57576
How do you configure the TLA7016 for use on your network?
Please refer to the TLA7000 Installation Manual for details on how to configure the TLA7016 for use on your network.
Numéro de la FAQ56616
Why do I not get output on my external VGA monitor when using the DVI to VGA accessory connected to the Primary DVI-D port on the TLA7012?
The Primary DVI -D port requires a true DVI monitor. Only the SecondaryDVI -I output is compatible with VGA when using the DVIto VGA accessory that is included with the TLA7012.
Numéro de la FAQ57046
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ53971
What is the max system memory for TLA7012 and TLA7016 system?
These motherboards both have 2 DIMM sockets. We currently ship 1GB of memory configured as 2 x 512M. The memory can be increased to a maximum of 2GB when 1GB DIMMS become available.
Numéro de la FAQ56946
Can the TLA Application Software support multi-user? (Dedicate separate modules in chassis to different users?)
No, it is not possible to split one mainframe into multiple logical mainframes.
Numéro de la FAQ56441
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ54981
My Touch Screen doesn't work on my oscilloscope. How do I enable it?
The touchscreen driver is not installed or functioning properly. For customers this is most often due to the user selecting "stop installation" during the first turn on experience. The user is prompted to install the driver with a Hardware …
Numéro de la FAQ63891
Can the new TLA7012 and TLA7016 mainframes+ hubs+ computer+ etc be mounted in a 19” equipment rack?
Yes. Both mainframes have an optional rackmount kit. The TLA7012 rackmount kit is 020-2664-XX  and the TLA7016 rackmount kit is 020-2369-XX.. 
Numéro de la FAQ55296
Windows XP has multiple language support but is there multiple language support within the application?
The windows XP language setting applies to all standard windows dialogs and some standard Windows selection buttons. So, things like the save and open dialogs will be translated and buttons in dialogs like OK, Cancel, etc. will be translated. The TLA …
Numéro de la FAQ57096
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ54131
What's the maximum MHz Bandwidth that the P6960 Flying Leads support?
The P6960 uses single-ended lead sets, which should perform well up to 100MHz. Actual performance depends on several factors like the number of channels being probed, the length and number of ground leads, the proximity of the channels to one another …
Numéro de la FAQ57926
Will TLA Application Software Version 4.0 and above run under Windows 95 or 98?
No. Version 4.0 and above only operate under Windows 2000 or XP Professional.
Numéro de la FAQ56331
Will the TLA Application Software v5.1 run on the 64bit version of Windows XP?
No. You need Windows 2000 professional or Windows XP Professional to run TLA Application Software v5.1.
Numéro de la FAQ56326
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ53961
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55006
When you set-up a "Mark" in a TLA application V5.1 Listing or Waveform window and then add comments to it+ will the comments be included in any printouts of the data?
If you mouse over a mark header the name of the mark and the comments for the mark are shown in a tooltip. The tooltip will be captured if you print the display.
Numéro de la FAQ56201
In a TLA7000 series multi-frame+ why does one mainframe need to be the master?
The master mainframe controls clock distribution used for correlation and controls start/stop synchronization. The master mainframe is also used for the trigger in/out and signal in/out connections.
Numéro de la FAQ56701
Do you have plans to support the TLA Application Software for other Operating Systems?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ56471
What version of mainframe firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TLA7016 mainframe.
Numéro de la FAQ56176
What is maximum number of symbols that can be used?
The number of symbols is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61181
Which cart do you recommend for the TLA7016?
We recommend the K4000 for use with one TLA7016.
Numéro de la FAQ57026
What is the advantage to buying a P6982 probe instead of a P6980 probe?
The P6982 is exactly the same as the P6980 except that it has only one 17-ch probe head so the total number of channels is 17 instead of 34. A customer would order the P6982 if they are only using quarter or half channels for (4x or 2x clocking). In …
Numéro de la FAQ57741
Can I install new modules in my TLA714+ TLA715 portable and TLA720+ TLA721 benchtop mainframes?
Not all the current modules can be used with the older mainframes.  The current modules TLA7Axx and TLA7NAx can be used in the TLA714, TLA720, TLA715, and TLA721 mainframes as long as they are running TLA Application Software v4.4 or above.However …
Numéro de la FAQ60436
Is it possible to save data acquired by a Logic Analyzer as an ascii-file (CSV format). I want a column with timing data+ and a column with ones and zeros.
Yes, you can save acquired data. With the Listing window currently open select export data from the File menu. This will save your acquired data as a .txt file. The data from within the .txt is taken from the Listing Window and the file format is the …
Numéro de la FAQ57436
Have there been any changes to the TLA7QS QuickStart?
There have been no changes to the TLA7QS circuit board. The TLA7QS workbook and software setups have been updated and are still compatible with Version 3.2 or higher of the TLA application software.
Numéro de la FAQ60626
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ54271
After installing the LabView Driver tktla the driver examples and VIs have a broken arrow and several of the subVIs have the error "Invoke Node 'Invoke Node' : contains unwired or bad terminal."
Please make sure .NET 1.1 SP1 is installed. If .NET 2.0 is also installed it is possible there is a conflict between LabView and another application. Try uninstalling .NET 2.0 and then reinstalling the tktla driver. Any VI that was saved after …
Numéro de la FAQ55176
What is the minimum signal amplitude for P6800 or P6900 series probes+ and P6400 series probes?
The minimum signal amplitude for single ended P6800 and P6900 series probes is 300mV peak-to-peak. The minimum differential is Vmax minux Vmin >= 150mV. The minimum signal amplitude for single ended P6400 series probes is 500mV peak-to-peak.
Numéro de la FAQ57821
How many waveforms can be displayed at one time?
The number of individual channel or busform waveforms that can be in any given Waveform window is limited only by the amount of virtual memory in the mainframe. In testing, we stopped adding waveforms at 2,000. The number of waveforms that can be …
Numéro de la FAQ60791
Why does the readout value of the counter/timers when used as a logic analyzer trigger event appear incorrect even though the logic analyzer triggered correctly?
Under certain conditions, when a counter/timer is used as a logic analyzer trigger event, the readout value displayed in the Status Monitor is incorrect even though the logic analyzer triggered correctly. The problem occurs under the following …
Numéro de la FAQ61426
My trigger is set to "trigger immidately" or "If anything then trigger". Why is my memory only half full?
This is because the default trigger position is set to 50% memory before the trigger and 50% memory after the trigger. Since the Logic Analyzer is triggering off the first thing it sees, it does not get a chance to fill up the first 50%. To fix …
Numéro de la FAQ57571
How do I change my TLA7016 from a static IP address to DHCP?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55571
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ54276
Which oscilloscopes are included in the latest iView support?
The TLA application software with iView V6.1.132 or later, supports the following oscilloscopes:TLA iView software >> DownloadPlease contact an Application Engineer in our Support Center if you have further questions that can't be answered here or in …
Numéro de la FAQ61416
What is the maximum number of channel groups?
The number of channel groups is limited only by the amount of virtual memory available from Windows.
Numéro de la FAQ61276
What is the current version of DSO (digitizing oscilloscope) module firmware and will I need to update it if I install Version 4.4?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61221
Is GbE necessary for the TLA Application Software or will the mainframes work with slower Ethernet infrastructure (e.g.100Mb)
GbE is not necessary. TLA7012 and TLA7016 mainframes will work with 10/100/1000 networks.
Numéro de la FAQ56726
How long does it take to update the mainframe firmware in my TLA7016?
It takes approximately 3 minutes to update the mainframe firmware.
Numéro de la FAQ55741
In the TLA Application how do I load and use a symbol file into my Listing Window or Histogram?
The logic analyzer uses two kinds of symbol files: Pattern symbol files and Range symbol files. The Range symbol files can contain function symbols, variable symbols, source code symbols, and color symbols. For a more thorough explanation of Symbol …
Numéro de la FAQ55846
Can I trigger on multiple busses with time correlation?
Yes, using intermodule signaling.
Numéro de la FAQ59121
How did you achieve the faster backplane in the TLA7000 series mainframes? What are you using?
We fine-tuned bus timings using a newer FPGA design and added enhanced DMA capability.
Numéro de la FAQ56521
Do you have an application note that explains how and when to use a logic analyzer? Is there a tutorial that will show me how to use my logic analyzer?
The XYZ's of Logic Analyzers explains the evolution from the digital oscilloscope to the logic analyzer. It explains the capabilities of a logic analyzer and will you choose the correct tool for your particular application. The Introduction to …
Numéro de la FAQ55406
What is the recommended calibrating interval for your logic analyzers? Do probes need to be calibrated?
We recommend calibrating your logic analyzer every year. Probes do not need to be calibrated.
Numéro de la FAQ57836
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ53571
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ54991
What happened to TLAVu?
Version 4.4 was the last version to have a separate off line viewer. The TLA software v5.0 or above no longer offer the separate TLA offline viewer.  The TLA software itself has integrated with the offline data viewer.  The user will need to install …
Numéro de la FAQ54616
I would like to connect our Logic Analyzer to a Scope with an iView cable. This scope is not in the current list and I am not sure how to add it to the Logic Analyzer system.
Go to System Menu 'Add iView External Oscilloscope? In the next window make sure the box "Show only iVerify compatible oscilloscopes" is not selected. You should be able to select your scope from the list. Hit the Next button and you will see …
Numéro de la FAQ57416
What is the current version of LA (logic analyzer) module firmware and will I need to update it if I install Version 5.1?
The firmware version can be verified from the TLA application, system properties menu. Please refer to the TLA Family Logic Analyzer Release Notes, for the version of digitizing oscilloscope module firmware compatible with Version 5.1.
Numéro de la FAQ61226
Are the P6810+ P6860+ P6864+ P6880+ P6960+ P6962+ P6964+ P6980+ P6982 probes compatible with our Logic Analyzer?
The P6800 and P6900 series probes are not compatible with TLA5200/B series, TLA600 series or TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer modules. They are compatible with TLA7AAx/ABx/NAx/BBx modules.
Numéro de la FAQ57126
Is there a way to write a Linux application to control our Logic Analyzer?
The easiest way to programmatically control a logic analyzer in a Linux/UNIX environment is with a script such as ActivePerl (a variety of Perl that has COM capabilities). If you wish to build a Linux application and have all the features of TPI.NET …
Numéro de la FAQ55896
Can I install new modules in my TLA704 portable and TLA711 benchtop mainframes?
No. You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60431
What is the last supported TLA application software version for the discontinued TLA700 series such as TLA714+ TLA720+ TLA715 and TLA721?
TLA Model Last supported TLA application softwareTLA714 v4.4TLA720* v4.4TLA715 v5.1 SP1TLA721* v5.1 SP1 *note: with the upgrade kit TLA7KUP option 19, the user could upgrade the TLA720 or TLA721 to TLA7016.  After the upgrade, the TLA7016 supports …
Numéro de la FAQ61261
Is TLA Software Application V5.1 Windows Server 2003 compliant?
We have not tested this so operation is not guaranteed. The application has been tested, and is supported on, Windows 2000 Pro and Windows XP Pro platforms (32 bit only).
Numéro de la FAQ56776
My logic analyzer has X amount of memory depth. How many samples is this equal to?
Memory depth in a logic analyzer is the same as the number of samples. For example a module with 512Kb of memory would give you 512K (524,288) samples across every channel.
Numéro de la FAQ57551
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ54326
Can you split the TekLink expansion hub between 2 or more multi-mainframe (Mainframe plus expansion mainframe/s) TLA systems?
No – you will need one TekLink expansion hub for each multi-mainframe system.
Numéro de la FAQ56451
What happens if the network goes down while I am taking an acquisition with a TLA7012 or TLAA7016 and the acquisition completes while disconnected. Can I reconnect and get my data?
If the network connection is lost, you will need to restart the TLA application and the data in the modules will be lost.
Numéro de la FAQ56896
Is there a way to capture LVDS using a P6410+ P6417 or P6418 probe?
The LVDS/TTL to single-ended TTL converter pod will allow the customer to capture low voltage differential signals on the TLA using the P641/P6417/P6418 probe. For detailed electrical characteristic differences please contact Dragonfly Software.
Numéro de la FAQ57506
In the TLA Application can I change a channel polarity?
To Change a Channel polarity:1) In the System window, click the LA Setup button.2) Click Channel Polarity in the Table Shows box.3) Click the button under Probe Channels/Names that corresponds to the channel for which you want to change polarity.
Numéro de la FAQ55836
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ55001
Can I merge my TLA700 modules?
It depends whether or not the modules are compatible and only modules with 102 or more channels can merge. The following are the basic rules for merging modules: TLA7Nx modules can be merged together, or with either TLA7Px or TLA7Qx modules. TLA7Nx …
Numéro de la FAQ57146
Is there a way to configure my TLA so that an email is sent when a trigger occurs?
Yes, follow the following steps:Enable Repetitive Run Mode Place the TLA logic analyzer in repetitive run mode by clicking on the repetitive/single run button to the right of the Run button. Access the Repetitive Properties Menu. Click on System and …
Numéro de la FAQ57511
What is the file format for saved data in the new TLA Application Software v5.1? Apparently+ different versions of the App SW have different formats.
The .tla file format changes from release to release. Because of this, we do not publish the .tla file format.
Numéro de la FAQ56941
Did the Performance Verification software change when TLA Application Software v5.1 was introduced?
The Performance Verification software did change a little.  The software for TLA7Lx/Mx/Nx/Px/Qx and TLA7Dx/Ex modules have not been updated to run on a remote PC controller.  If you need to verify one of those modules, you must do so in a TLA7012 or …
Numéro de la FAQ55391
I want the listing to show the system time when triggered in the TLA Application Software. The Timestamp does not display the hours+ minutes or seconds column.
To show the system time the Timestamp Reference must be set to Absolute. Right click the Timestamp column. Go to Properties and choose the column tab. In the Timestamp Reference Box choose Absolute. In the Listing Window move the cursor to the top …
Numéro de la FAQ55816
What is the filename of the file needed to update my TekLink firmware on my TLA7016 or TLA7012?
The file needed to update the TekLink firmware is "TekLink.upd".
Numéro de la FAQ56111
How do I check the IP address of my TLA (or any Windows 2000/XP computer)?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ipconfig" and press "Enter". It will now show you the IP address.
Numéro de la FAQ52541
I do not want to store consecutive samples. How do I only store the samples that are relevant?
There are a number of ways to store only the samples that you want. Selecting storage none allows one to only store when a state explicitely says to store a sample. Transitional storage only stores a sample if one of the specified channel goups …
Numéro de la FAQ57396
What is the replacement for a TLA714?
The TLA7012 is the direct replacement for the TLA714. All of the modules that work in the TLA714 will work in the TLA7012.
Numéro de la FAQ53566
Are unused clock or qualifiers usable as data inputs when sampling asynchronously or in timing mode or with an internal clock?
Yes.
Numéro de la FAQ60396
Can I install Windows XP on older TLA’s?
The TLA600 series, TLA704, TLA711, TLA714 and TLA720 are not supported for Windows XP. TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57141
How do I use "ping" to check if my TLA and my computer are connected correctly?
In Windows 2000 or Windows XP click on the "Start" button and select "Run". Type "cmd" in the box and click "Ok". At the prompt, type "ping" then a space, and then the name or IP address of the computer you are trying to test connection to.
Numéro de la FAQ52721
How can I locate the MAC address of the TLA7016?
If you know the IP address of the TLA7016, you could try to following commands in the DOS prompt to look up the MAC address.c:\ ping c:\arp -aand you will see MAC address of TLA7016If you do not know the IP address of the TLA7016 …
Numéro de la FAQ59411
What programmatic options do I have to remotely connect to the Logic Analyzer from my Windows OS.
TPI.NET - Provides great flexibility in choices for development languages. Component developers can use any language that supports .NET -- VC++, C#, VB, and others. .NET offers an easy way for developers to create components. COM/DCOM - Supports …
Numéro de la FAQ57886
What happens to my TLA connection when I press the RESET button on the TLA7016 Interface Module's front-panel? Is the acquired data in the modules lost?
Pressing the reset button the Interface Module will cause the network connection to be lost. When this occurs, you will need restart the TLA application and any data in the modules will be lost.
Numéro de la FAQ56901
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ54376
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ53986
Are all my modules supported in your TLA7000 series mainframes (TLA7012+ TLA7016)?
Yes, every logic analyzer and DSO module for the TLA700 series is compatible with the TLA7000 series mainframes.
Numéro de la FAQ55196
For my current TLA714 portable or TLA720 benchtop mainframe+ what upgrades are necessary before I can use the new TLA7PG2 pattern generator module?
You should upgrade all of your TLA700 Series mainframes that will be used together to Version 4.0. Please order TLA7UP Option 11 or download Version 4.0 TLA Application Software for FREE. The FREE software can be located under Resources For You in …
Numéro de la FAQ59341
I would like to automate the acquisitions. How can I repeatedly take acquisitions without user interaction in the TLA Application?
Repetitive Mode allows taking acquisitions repeatedly without user interaction. This can be turned on or off by either clicking on the arrow next to the run button or selecting Repetitive under System->Repetitive. You can change the settings for …
Numéro de la FAQ55821
In my TLA+ why does the timer keep going after I clear it?
Clear timer will always clear the timer to zero but the timer will start over and continue to run. If you want to stop the timer before starting it over then stop the timer in one state and clear the timer in the following state.
Numéro de la FAQ57431
How do I export acquired data on my TLA to ASCII?
To export data from the TLA Application, create a listing window and go to the file menu and select export. There are several options for output formats on this window including ASCII.
Numéro de la FAQ52566
How do you save a system with data?
Go to File -> Save System. Make sure the option to save acquired data is checked.
Numéro de la FAQ57356
How do I do source code correlation with a dis-assembler?
The basic process for supporting source code correlation is as follows:The user compiles their code, using a compiler switch to tell the compiler to include debug or symbolic information in the object file.At this point, the debug information is …
Numéro de la FAQ52551
Can I connect flying leads to my P6860+ P6880 or P6419?
Yes, Nexus has an adapter, the NEX-CFLSE & NEX-CFLDF that will allow connection between the connectorless compression probe and Tektronix probe flying leads. Please visit Nexus for details.
Numéro de la FAQ55246
How do I activate the rear panel SVGA output on the TLA714 to drive an external monitor? The Display Adapter and Display control panels do not appear to offer the option+ and the monitor I have connected to the port does not see a signal.
In order to activate an external monitor via the Secondary Video SVGA output you will need to go into the BIOS during startup. Press F2 to go into BIOS (during boot) and go to the advanced menu. Go down to "Silicon Motion Simulscan" and enable it …
Numéro de la FAQ57286
I have a Tektronix DPO or DSA Oscilloscope and a TLA running Application Software v4.4 or below and I cannot get iView to work. Are they supported?
Tektronix DPO and DSA scopes require TLA Application Software v5.1 or above for iView to work.
Numéro de la FAQ52851
I am using a LabView client application to communicate with the Logic Analyzer but am receiving an error 1172 when I try to connect.
Please make sure you can first communicate locally from the logic analyzer. You can use one of the three example VIs that came with the tktla driver available from National Instruments. Also you need to include the TlaNetInterfaces.dll within the …
Numéro de la FAQ55766
Do the TLA mainframes support DHCP?
The TLA mainframes can be configured to support DHCP client capability so that when you connect the TLA to a network, it will automatically acquire an IP address and configure itself accordingly without manual intervention.If a TLA mainframe is on a …
Numéro de la FAQ56466
State VS. Timing - What is a state timing measurement or a timing measurement? What is the difference between internal and external clocking?
For a state measurement the logic analyzer is clocked by a signal from the system under test. At every valid clock, the logic analyzer takes a snapshot of the system under test. This snapshot (sample) is clocked by the system so the measurements are …
Numéro de la FAQ57631
I have connectorless compression probes (P6860+ P6880+ P6419) and need to connect to the Mictor on board. Is there an adapter to do this?
The NEX-HDSWIZ2 is used when there is a Mictor connector on a target that must be connected to Tektronix P6860, P6880 or P6419 compression probe(s). In addition to making this connection, the adapter also provides the ability to rewire the pinout …
Numéro de la FAQ55811
My TLA is running Windows 98. Can I upgrade the TLA SW to the latest version?
The latest version of TLA application software compatible with Windows 98 is V3.2. Version 4.4 of the application software is not compatible with Windows 98 and so the OS must be upgraded to Windows 2000 if you wish to install the latest application …
Numéro de la FAQ57561
The signal mapping of my on board Mictor for P6434 is not equal to the mapping required for the support package. How can I re-wire the signals to meet the support package mapping?
Nexus offers a Adapter called the NEX-HDSWIZ for re-wiring Mictor connectors on a target for connection to Tektronix P6434 High Density Probes. It provides the ability to rewire all 38 connectors. Please visit Nexus for details.
Numéro de la FAQ56011
How do I change my TLA7016 from DHCP to a static IP address?
If you are currently connected to the TLA7016 you can change it by opening the TLA Connection dialog (the first screen when you select the TLA Application icon). Next highlight the TLA7016 on the screen and click the "TLA Configuration" button at the …
Numéro de la FAQ55576
Can V5.1 of the TLA application SW run on Linux?
No. TLA Software Application V5.1 will run on Windows 2000 Pro and Windows XP Pro platforms.
Numéro de la FAQ55321
Does the logic analyzer have a constant repetitive trigger mode?
Yes. Select the repetitive trigger mode by either clicking the arrow next to the RUN button or selecting System->Repetitive
Numéro de la FAQ60586
Is it possible to define several trigger conditions using the same channel(s) for these triggers?
Yes.
Numéro de la FAQ60891
What is the Operating System on the TLA7016?
This will depend upon the computer used to control the TLA7016. Customers can use either Windows 2000 Professional or Windows XP Professional machines to control the TLA7016. The TLA7PC1 controller supplied by Tektronix ships with Windows XP …
Numéro de la FAQ56966
Could the logic analyzer with less than 136 channels be used for the 4x clocking mode?
Yes.  However, part of the channels on the probe head would be disable for transferring the signals and used for the storage only.  If you have the TLA7 NA 4/AA4/AB4/AC4/BB4/BC4 modules, you could use the 4X demux probe P6964 which has 4 probe head …
Numéro de la FAQ59196
Is the GbE link on the TLA7012 and TLA7016 Tek proprietary or the industry standard?
The GbE ports on the TLA7012, the TLA7016, and the TLA7PC1 are compliant with industry standards.
Numéro de la FAQ55871
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53561
I would like to get a user guide to run the TLA. Do you have a downloadable PDF file to document how to use your instrument?
Yes, you can download the latest manuals at Tektronix Manuals Finder The TLA Family Quick Start User Manual is a good reference for the TLA Series.
Numéro de la FAQ57421
What is the filename of the file needed to update my mainframe firmware on my TL708EX?
The file needed to update the mainframe firmware on the TL708EX is "TL708EX.upd".
Numéro de la FAQ56096
My memory storage is set to none and the system triggers but the program does not stop running.
In order for the acquisition to complete the entire acquisition buffer must be full. Normally when one triggers the module the rest of the buffer fills very quickly because all samples are stored until the buffer fills (storage set to all). If there …
Numéro de la FAQ57556
Can you create your own trigger in the waveform trigger window in TLA application software V5.1?
No - not at this time.
Numéro de la FAQ55326
What is the trigger latency between mainframes+ when a module (TLA7AA4) from the Master
TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger latency via TekLink cable is 161ns plus 1 sample. TLA7Axx/TLA7NAx to TLA7Axx/TLA7NAx inter-mainframe trigger via TL708EX is 186ns plus one sample.
Numéro de la FAQ64221
Is Windows XP available on any TLA?
Currently Windows XP is the operating system on TLA7012 and TLA7016 mainframes and the TLA5200B series logic analyzers.TLA5200 series can be updated with TLA5KUP Option 41. The TLA715 and TLA721 can be updated with TLA7UP option 41.
Numéro de la FAQ57546
What is the replacement for a TLA704?
The TLA7012 is the direct replacement for the TLA704. All of the modules that work in the TLA704 will work in the TLA7012.
Numéro de la FAQ53556
Could I use the qualifier channel as the external clock?
No.  You can not setup the qualifier as the clock channel.  However, you could plug in a different probe slot to make sure it has the clock channel instead of the qualifier channel.  Both of the clock and qualifier channel could be used as a data …
Numéro de la FAQ59191
What is the Maximum state acquisition offered by the TLA7Axx?
The TLA7Axx offers up to 800MHz sampling rate in Half Channel mode and 625MHz DDR in quarter channel mode.
Numéro de la FAQ57801
Can the automated measurements available in TLA application V5.1 be pulled out of the LA?
Yes, there is an export button in the measurement dialog that will export the statistics table to a file of type text or csv format.
Numéro de la FAQ55291
Is there a convenient way to functionally test logic analyzer probes?
Nexus, a partner of ours, offers an accessory called NEX-PROBETESTER2. It is compatible with P6400, P6800 and P6900 series probes and is capable of testing up to 32 data channels and a pair of clock/qualifier lines. For more information go to: …
Numéro de la FAQ57486
What is the maximum bus width that can be monitored?
You can combine modules using the special high-speed connectors on the side of each logic analyzer module so that all channels operate from a single timebase. This is called "module merging." All channels may be contained within a single channel …
Numéro de la FAQ61266
Were there any improvements made to the TLATPI (Tektronix Programmatic Interface) in Version 4.4?
Please refer to the TLA Family Logic Analyzer Release Notes (ReleaseNotes.doc). If you use TLATPI on a remote machine, you must use the same version of TLA Application Software as the TPI Client Software; otherwise you may experience compatibility …
Numéro de la FAQ61076
My iView cable is too short to attach the PC to the TLA7016. Do I need a different cable?
One can choose to use a TLAPC1 in these cases. The TLAPC1 is designed to be placed on top of a TLA7016 mainframe in close proximity, thus allowing usage of the iView cable in its current configuration
Numéro de la FAQ55936
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ54386
What is the replacement for a TLA721?
The TLA7016 is the direct replacement for the TLA721. All of the modules that work in the TLA721 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53581
How long is the Teklink cable?
2 meters
Numéro de la FAQ56636
Is there an adapter for the P6960 probe to the Mictor connector on board?
Yes, Nexus makes an adapter (NEX-M2P69X) that will allow a P6960 probe to connect to the mictor connection on the board. Please visit Nexus for details
Numéro de la FAQ57526
How do you take a screen capture on the TLA?
SnagIt made by TechSmith comes with every current logic analyzer portable and mainframe and on the application CDs for version 4.2 of the application software and later. This tool is used for all your screen capture needs. SnagIt will allow you to …
Numéro de la FAQ57361
Will my older TLA7Lx and TLA7Mx logic analyzer modules or TLA7Dx and TLA7Ex digitizing oscilloscope modules work in the new TLA7012 portable or TLA7016 benchtop mainframes?
Yes, but you must reflash the firmware on your modules with the new Version 5.1 compatible firmware located on your TLA mainframe hard disk.If any module that is not running Version 5.1 compatible firmware is installed in a TLA mainframe running …
Numéro de la FAQ56321
I have TLA Application Software Version 5.x and all I see in the in TLA Connection box is "Offline".
There are many things that could cause your TLA to not show up in the TLA Connection box. One of the things is if the networking is not setup correctly. 1. Verify that the TLA and the Client PC have a valid IP addresses and that they are in the same …
Numéro de la FAQ52856
How do I stop/disable the TLA Application V5.1 from automatically starting up after booting the TLA?
From the TLA Application go to the System Menu->Options->Startup Tab. There is an option to Disable starting the TLA Application on login.
Numéro de la FAQ55726
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ54001
How can I get the features of the new TLA715 portable or TLA721 benchtop mainframes (e.g.+ faster CPU+ internal CD-ROM+ USB+ etc.) in my existing TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60656
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ53806
In the TLA Application Software Listing Window I would like to know the State for each acquired sample (Trigger State Machine).
Go the the Setup window and add a new Group. Then add the status bits to this group. They are located at the bottom of the section called "Probe Channels/Names". Now right click the new Group Name for your status bits and choose "Select Status Bits …
Numéro de la FAQ55856
How can I enable the compound clocking in the TLA application software v5.6?
The compound clocking is not implemented in the v5.6 software yet.  If you need compound clocking, you will need to use the v5.1 SP1 software.  However, if you have a saved setup file created in v5.1 SP1 software, you will still be able to use the …
Numéro de la FAQ59396
How does the logic analyzer implement transitional timing?
All data is sampled using the logic analyzer's internal sample clock that can be varied from the minimum sample interval of 2ns to 50 msec. Transitional Storage mode works when using either internal or external clocking. The Storage feature in the LA …
Numéro de la FAQ60761
Where can I found an installation instruction and an oscilloscopes compatibility list for the iView cable?
In the TLA application software, go to "System" -> "Add iView External Oscilloscope" to see the list of oscilloscopes supported by the TLA and the installation instructions.
Numéro de la FAQ60196
In the TLA Application how do I combine the setups from my unmerged modules into a new setup for my merged module system?
First Export the individual setups from each module. For each module open its Setup Window, go to the File menu and select Export Channel Setup. After you have exported every module setup, merge the system (Both physically and then logically by going …
Numéro de la FAQ55841
What version of TekLink firmware should I have on my TLA7016?
For TLA Application Software v5.1, you should have version 5.1.187.0 for the TekLink firmware on the TLA7016.
Numéro de la FAQ56181
Is it possible to use iView when making a remote LAN connection to the TLA?
It is not possible to use iView when making a remote LAN connection unless you connect the scope via the USB-GPIB or directly through GPIB to the PC that is actually running the TLA Application.
Numéro de la FAQ52906
What is the replacement for the TLA7AAx+ TLAABx or TLA7NAx module?
The TLA7ACx is the direct replacement for the TLA7AAx, TLA7ABx or the TLA7NAx module.  It comes standard with the fix channels assignment for the analog mux (the 4 BNC analog outputs).  With the option AM, it will enable the fully implemented analog …
Numéro de la FAQ60101
How do I determine how much memory is installed in my Logic Analyzer?
Within the TLA Application software go to System -> System Properties -> Select LA X tab.
Numéro de la FAQ57306
What is TekLink?
It is an instrument interconnection interface. Currently TekLink 1.0 is implemented on the Logic Analyzer mainframe TLA7012 and TLA7016 for interconnection between the expansion mainframe.  TekLink 2.0 is implemented on the DPO/DSA70KB.  It is used …
Numéro de la FAQ61196
Is there a way that I can view data files acquired from my TLA on my PC?
The latest TLA Application Software version 5.1SP1 has both the online and offline versions integrated into one package and can be downloaded from www.tek.com.
Numéro de la FAQ52961
How long does it take to update the TekLink firmware in my TLA7016?
It takes approximately 4 minutes to update the TekLink firmware.
Numéro de la FAQ55746
How much hard disk space is used by the TLA application & Windows 2000 Professional?
As delivered, your TLA700 system has approximately 1.1 GB of disk space used by the Windows operating system, utilities, and the TLA application files.
Numéro de la FAQ60796
It takes a long time for the TLA Connection Window in the TLA Application to find my logic analyzers. Can I speed this time up?
If your network does not have DNS it will take longer for the Application to translate hostnames into IP addresses. To eliminate this search time it is recommended to include a HOSTS file on your PC under the Windows folder->system32->drivers->etc …
Numéro de la FAQ55916
Is there any way to get simultaneous LA and DSO acquisition without having to double-probe?
Yes, if you have a TLA7Axx you can use the 4 analog outputs to get simultaneous analog and digital measurements. However, the TLA7Axx is currently the only LA that supports analog and digital measurements through a single probe.The TLA7Axx iView …
Numéro de la FAQ59731
Will the TLA application software run on a regular PC so I can perform off-line setups and off-line analysis of data?
TLA software v5.0 and v5.1 can be loaded on a PC using Windows 2000 and XP. You will be able to perform off-line setups and off-line analysis of data as well as remote control of the TLA mainframe.  TLA software v5.6 and v5.7 works only with Windows …
Numéro de la FAQ61466
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on …
Numéro de la FAQ55686
Can a TLA be rebooted remotely?
Windows XP remote desk top (RDT) can be used to remotely reboot a machine. There is no planned way to turn on a machine remotely.
Numéro de la FAQ56366
What is the replacement for a TLA711?
The TLA7016 is the direct replacement for the TLA711. All of the modules that work in the TLA711 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ54986
Does an application exist to convert waveform data or .prn files to pdf or another windows format?
There are third party converters available to convert .prn files to pdf. You can find these applications by searching for them in google. All versions of TLA SW 4.2 and later (not including web install) include SnagIt which can capture a picture of …
Numéro de la FAQ57236
What is MagniView?
MagniVu data is the result of asynchronous digital oversampling architecture. This data is automatically acquired whenever you perform an acquisition. This means that, even if you specify synchronous (state) acquisition, you can view the asynchronous …
Numéro de la FAQ57726
I am using TPI.NET to load a saved system. When I load a system the Listing Window reverts any saved changes back to the default settings. Why does it behave this way?
When a module is loaded, the TLA SW application does not assume that the new module setup will have the same channel groups as the previouse setup. Therefore all the Waveform traces and Listing columns associated with data from the previous modules …
Numéro de la FAQ57391
How closely matched are the P6400 series probes?
The time delay specifications are the same on every P6400 series probe (P6410,P6417, P6418, P6419 and P6434 probes). This allows you to mix probe types on the same logic analyzer, thereby preserving accurate data correlation from the probe tip of …
Numéro de la FAQ60671
How do I rackmount my TLA mainframe?
Rackmount kits are available for the TLA600, TLA5000 and TLA700 Series. You can find order details for the rackmount kit in the TLA600, TLA5000 and TLA700 series product information data sheet. In the data sheet for the TLA5000 series, it is located …
Numéro de la FAQ60726
Are channels reduced when the sample rate is 8 GHz?
No. The 8 GHz sampling provided by MagniVu is available on all channels, all of the time through the same probe simultaneous with up to 800 MHz* state timing. *Sample rate and state timing limits depend on Logic Analyzer model and ordered options.
Numéro de la FAQ60336
Is there a new version of TLAVu? All I can find is v4.4 and v3.2.
TLAVu no longer exists. Instead, we integrate the offline data viewer into the TLA software itself.  To use the offline data viewer, simply run the TLA software on the regular PC in offline mode.  The latest TLA software is available at www.tek.com …
Numéro de la FAQ52946
How do I get the Tektronix DPO4000/MSO4000 Oscilloscopes to do iView with the TLA?
The DPO4000 is unique in that it needs the TEK-USB-488 along with the iView cable to make it work. To set this up you would connect the TEK-USB-488 to the DPO using the USB cable, then connect the GPIB end of the iView cable to the TEK-USB-488 and …
Numéro de la FAQ52591
Where do I find what version of TLA Application Software I currently have?
The version number can be found from within the TLA Application under System Properties in the System menu.
Numéro de la FAQ61411
Is there an expansion mainframe available for my TLA mainframe?
Yes, the TLA7XM Expansion Mainframe which extends the TLA714 or TLA715 portable mainframe from 2 to 24 modules and the TLA720 or TLA721 benchtop mainframe from 5 to 60 modules. Please refer to the TLA700 Series section for further details.
Numéro de la FAQ60936
Does the enhanced monitor firmware need to be updated if I'm upgrading my TLA7016 from v5.0 to v5.1?
No. The enhanced monitor only needs to be updated if you are converting a TLA720 or TLA721 to a TLA7016 using TLA7UP option 19.
Numéro de la FAQ55416
What is the filename of the file needed to update my mainframe firmware on my TLA7012?
The file needed to update the mainframe firmware on the TLA7012 is "TLA7012.upd".
Numéro de la FAQ56101
When connected to the LAN and using the remote host mode in the TLA Application Software how does it find the mainframe or if there are several mainframes on the LAN how does it identify the specific mainframe you're looking for?
There is a connection dialog that is used that can display TLA's on the network, can search for TLA's connected to a network, or can automatically connect to a TLA of the users choice. The connection dialog shows IP address or host name of the TLA's …
Numéro de la FAQ56186
Is the name of the TLA available over TPI.NET?
No. TPI.NET does not provide the names of TLA’s on a network, nor does it provide the name of the TLA to which a client is currently connected.
Numéro de la FAQ56741
Where can I find the LabView drivers for my logic analyzer?
LabView drivers are downloadable from National Instruments Instrument Driver Network. You can download them from the website or if using LabView 8.0 or later open LabView and go to Help->Find instrument Drivers and enter tktla for the keyword.
Numéro de la FAQ56211
Can setups and data be shared between the TLA600 Series and the TLA700 Series?
Yes, you can easily share both seteups and data.
Numéro de la FAQ60481
What is the maximum channel group name length?
There is no limit to the channel group name length.
Numéro de la FAQ61271
Do the TLA700/7000 Series Logic Analyzers Series use VXI technology?
Yes, however, the TLA700/7000 Series Logic Analyzers do not allow any non TLA700/7000 modules to be used nor can the TLA700/7000 Series mainframes be used as a VXI mainframe. 
Numéro de la FAQ60541
While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?
Highlight state 1 in the Overview section of the trigger window. The Overview section is at the left section of the Trigger window. Right click on State 1 and "add state". New state is now after State 1. Right click on State 1 again and "cut state" …
Numéro de la FAQ58996
What is the replacement for a TLA720?
The TLA7016 is the direct replacement for the TLA720. All of the modules that work in the TLA720 will work in the TLA7016. The TLA7016 no longer has a built in PC so an external PC (like the TLA7PC1) running Windows 2000 Service Pack 4 or Windows XP …
Numéro de la FAQ53576
How do I attach the connectorless compression probe to the design board?
There are two methods to connect the compression probe to the design board. One may use a Nut Block for PCB's .050'' to .093'' thick. The Nut Block may be easily removed. For PCB's .093'' to .250'' thick the Press-in Nuts are used.
Numéro de la FAQ57296
Can the TLA assert a hardware interrupt on my target system?
Yes, using either the Trigger Out or Signal Out connectors, both of which are TTL-compatible outputs, back-terminated into 50 ohms.
Numéro de la FAQ60521
Will the older Oscilloscope TLA7Dx and TLA7Dx modules work in the new mainframes?
Yes. The TLA7Dx and TLA7Ex Oscilloscope modules will work in the TLA7012 and the TLA7016. All existing TLA700 series modules will work in the new mainframes.
Numéro de la FAQ57086
How do I set up a trigger and what resources and strategies are available for creating my own triggers?
A large number of trigger resources are available that make it possible to trigger at just the right time and store just the right data. Setting up these resources can be challenging for a new user. To minimize this effort a feature called Easy …
Numéro de la FAQ58286
Is there a way in the TLA Application Software to do performance analysis? I need to know how often my bus or group is in certain ranges.
Use the Histogram window to set up, capture, and display performance analysis data from an LA module channel group, counter, or timer. Each Histogram window displays address ranges and the corresponding counts, percentages, and histogram bars based …
Numéro de la FAQ55891
Can multiple clock sources be acquired using a single logic analyzer?
Yes, multiple clock sources can be acquired using a single logic analyzer as long as the active clock edges are the minimum sample time (either 2ns or 4ns depending on module model). *Minimum sample interval is 4ns for TLA6xx Series, TLA704 and older …
Numéro de la FAQ60471
What probes can be used with the TLA7NAx+ TLA7Axx or TLA7BBx modules?
The following probes can be used with the TLA7NAx, TLA7Axx or TLA7BBx modules: P6810, P6860, P6864, P6880, P6960, P6962, P6964, P6980 and P6982.
Numéro de la FAQ57881
Is there ever going to be a mechanical (new processor board) upgrade path for the TLA715?
We will not be offering a processor board upgrade for the TLA715. Current TLA715 customers can upgrade to v5.1 of the TLA Software Application and take advantage of the new remote hosted mode to use an external (faster) PC to run the TLA software …
Numéro de la FAQ56771
I connected the Trigger Out from my logic analyzer to my Oscilloscope but it does not send a trigger pulse to the scope. What could be the problem with the logic analyzer?
One can turn off the System Trigger Out on the Logic Analyzer. Please check this setting from: System -> System Trigger... Check the box for Enable System Trigger Out.
Numéro de la FAQ55791
I cannot connect to my TLA7012 or TLA7016 remotely with remote host mode.
There are a number of reasons why you might not be able to connect via the remote host mode. Perform the following checks: (TLA7012 Only) Check to determine the TLA Server is on. This is automatically turned off upon restart. You can find it in the …
Numéro de la FAQ55776
Can you disconnect someone from the TLA (i.e. if they are using remote desktop)?
No. The connection dialog will show who is connected to a TLA and disconnection requires personal interaction from that person.
Numéro de la FAQ56446
I would like to design our connectorless compression (P6860+ P6880+ P6864+ P6419) probe footprints to reduce the circuit board area by half? Can the probes be modified to do this?
Yes, Nexus makes a compression probe head adapter (NEX-2X-PROBE) that allows probes to be placed on opposite sides of the board back-to-back. This reduces the circuit board area needed by half. The holes needed for a 17 channel probe can be used for …
Numéro de la FAQ55826
Will we still have fast inter-module communications in TLA Application Software v5.1 (such as the triggers/control signals) that can be quickly communicated between modules like in previous versions of the Application SW?
Within the mainframe, the internal signaling is the same as before.
Numéro de la FAQ57091
Why can't I connect remotely to my TLA7012 to update the firmware?
Firmware updating for the TLA7012 needs to be done locally.
Numéro de la FAQ56246
Will a DVI to VGA adapter ship with every TLA7012 mainframe?
Yes, each TLA7012 will ship with a DVI-to-VGA adapter; however, customers wishing to use an analog monitor with the TLA7012 will need to supply their own VGA cable.To use a TLA7012 with an analog monitor, the DVI cable or adapter should be attached …
Numéro de la FAQ56316
Are there example LabView VIs available?
The National Instrument Driver tktla is available at their Instrument Driver Network. It contains three examples for using their driver. If using LabView 8.0 you will need to search for them using the NI Example Finder once the driver is installed …
Numéro de la FAQ55211
Can you automate control of the TLA from a Linux system?
There are a couple of options that you have depending on what you want to do. If you want to control the desktop of the TLA from your Linux box, it is suggested that you use VNC. This can be found at http://www.realvnc.com/ . If you want to …
Numéro de la FAQ57206
Why do I get a "IP read error" on the screen of my TLA?
The network factory default for the TLA7016 is DHCP. The TLA is expecting to see a DHCP server on your network and it isn't seeing one. To fix this, make sure that it can communicate with a DHCP server or set it to a static IP address. For more …
Numéro de la FAQ57036
In the TLA Application Software when setting up my trigger+ I would like to setup a trigger event when my Group goes High or Low.
Using the Goes High or Goes Low event is only available by selecting a channel. If your group is made up of one channel then find the channel associated with the group in your channel setup. In the Power Trigger clause definition choose "If channel" …
Numéro de la FAQ55861
What supports and capabilities are there for RapidIO and Serial RapidIO?
The Tektronix TMS805 application support package facilitates the testing of 8 and 16-bit RapidIO rates up to 1 Gb/s. Nexus offers the NEX-SRIO support package for support up to 3.125 Gbps for their Serial RapidIO solution. Please see Nexus for …
Numéro de la FAQ56166
How can I get more DRAM or a bigger hard disk in my TLA704 portable and TLA711 benchtop mainframes?
You will need to utilize our mainframe trade-in program where you can trade-up to the newer TLA715 or TLA721 mainframes. Please contact your local Tektronix field representatives for further details.
Numéro de la FAQ60651
What is the filename of the file needed to update my mainframe firmware on my TLA7016?
The file needed to update the mainframe firmware on the TLA7016 is "TLA7016.upd".
Numéro de la FAQ56106
Are iView Cable Rev A and Rev B compatible with the current versions of the Application software?
Yes, both Rev. A and Rev. B of the iView Cable are compatible with the most current National Instrument driver available on the v4.4 Application CD.
Numéro de la FAQ57116
Can I boot Windows XP on my TLA7012 or TLA7PC1 from a USB attached hard drive?
Windows does not support booting from USB devices. For further information: http://www.microsoft.com/whdc/device/storage/usb-boot.mspx
Numéro de la FAQ56376
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ53736
Is there an adapter for the connectorless compression probes (P6419+ P6860+ P6880) to the mictor connector?
Yes, Tektronix makes an optional probe accessory called the 34 CH MICTOR-ON-PCB TO P6860/80 COMPRESSION ADAPTER.
Numéro de la FAQ57521
Is there a way to stop the TLA-Connection box from popping up every time that I start my TLA?
Open up the TLA application and go to the "System" menu and select "Options". Go to the "Start-Up" tab and set "During login start TLA application" to Disable.
Numéro de la FAQ52971
Can a data or channel group be displayed twice with different display formats?
Yes. Channels and groups may be displayed as Hex, Octal, Binary, Decimal, Signed Decimal or Symbolic. One can display a group two or more times in these formats.
Numéro de la FAQ60401
Will the files that I saved in previous versions of the TLA Application Software correctly load into v5.1?
Yes, all TLA Family save from V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4 or V5.0 systems will load properly on V5.1 systems.The V5.1 save files will not load onto V1.0, V1.1, V2.0, V3.0, V3.1, V3.2, V4.0, V4.2, V4.3, V4.4, or V5.0 …
Numéro de la FAQ61456
Can I compare two data acquisitions?
Yes, first you must define the data to compare by setting up the Define Compare dialog box. Go to the LA Setup window and then click the Compare button near the top right corner of the setup. In the Define Compare dialog box you will specify the …
Numéro de la FAQ57136
TLAVu is not installing. It says I need a mainframe.
You are installing the TLA Application software and not TLAVu. Check CD #2 for TLAVu or download it from www.tek.com.
Numéro de la FAQ57651
I want to save ink when I print a waveform. How do I change to a light background color in the waveform display?
Printing a waveform with the default dark background can use up a lot of ink. You can easily change the color scheme to a dark waveform on a light background. First, right click on a waveform in a waveform display and bring up the properties page …
Numéro de la FAQ58431
Is there any way to show the sample with the corresponding trigger program state in the listing or waveform?
Yes, in the TLA System Setup window add another probe group with your desired name such as State. Now add the Status Bits as the probe channels. Finally right click on the group and choose Select Status Bits Type… Choose Trigger State Machine (TSM) …
Numéro de la FAQ57541
How do I transfer from the logic analyzer to a VHDL or Verilog simulator?
Tektronix has added support for SynaptiCAD's products to its line of logic analyzers and pattern generators. The new Tektronix TLA600 and TLA700 Series logic analyzers can capture waveform data in a form that can be read by WaveFormer, VeriLogger …
Numéro de la FAQ60741
What is the replacement for a TLA715?
The TLA7012 is the direct replacement for the TLA715.  All of the modules that work in the TLA715 will work in the TLA7012.
Numéro de la FAQ54996
How do I update the TLA firmware?
must power down the logic analyzer to allow the TLA application to start upproperly.TLA700 Series Logic Analyzers and ModulesIf you need to upgrade the firmware on your logic analyzer modules, a startupmessage appears telling you that you need to …
Numéro de la FAQ57336
Can I create a file (reference memory) in an external application and have the Logic Analyzer use the compare function with acquired data to compare the differences between the two?
The TLA Application Software cannot compare against an external source. The target has to be another saved .tla file acquired through the TLA probe interface.
Numéro de la FAQ52386
In the TLA Application I am writing a power trigger and the program does not let me add more than four clauses in a state. I have another trigger program that lets me define up to 8 clauses per state. What trigger program rule am I breaking?
Each state is made up of one or more clauses. If you use more than four triggerevent resources in a state, you can have up to four clauses per state. If you havefour or fewer trigger event resources in a state, you can define up to 16 clausesper …
Numéro de la FAQ55851
Why am I getting screen artifacts when I connect my widescreen (16:9) monitor to the DVI-I port on my TLA7PC1?
The TLA7PC1 and TLA7012 default setting for the DVI-I port is Spread Spectrum Clocking. These artifacts can be resolved by disabling the Spread Spectrum Clocking in the BIOS.
Numéro de la FAQ55146
Where can I find DDRI and DDRII support?
Nexus provides a variety of DDRI and DDRII supports including DDRII support up to 667MHz. Note: They may have faster, newer supports so please visit Nexus for their latest DDR support details.  
Numéro de la FAQ56206
Will my current processor/bus support packages work with Version 5.1?
All TMSXXX support packages introduced prior to Version 5.1 have either Version 1.0, 1.1, 2.0, 3.0, 3.1, 3.2, 4.0, 4.2, 4.3, or 4.4 setup files on the factory-supplied disks that are forward compatible with Version 5.1.All TMSXXX processor/bus …
Numéro de la FAQ61441
I get a message that says "The version of NI-488.2 for Windows does not support the obsolete GPIB-USB you are attempting to install. Contact National Instruments for details on upgrading to a new GPIB-USB revision" when I plug in the iView cable. How do I fix this?
If you get this message, you have an older GPIB-USB cable. You need to have National Instruments 488.2 software v2.3 to get this to work. It can be found on the TLA Application software v5.1 CDs. Anything greater than v2.3 will not support all …
Numéro de la FAQ55796
TLA7000 Logic Analyzers

Numéro du document : 52W-15053-22
Datasheet
TLA7016
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.


Numéro de référence : 077004100
Déclassification
TPI.NET Instructions
TIP.NET


Numéro de référence : 077135300
Programmation
TLA700/7000 Series
Tektronix Logic Analyzer Declassification and Security

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair


Numéro de référence : 077003702
Déclassification
Tektronix Supplemental, 071329504
Product Information Sheet for the People‚s Republic of China

This sheet contains supplemental product information for the People‚s Republic of China.


Numéro de référence : 071329504
Utilisateur
TLA7BXX Series
Logic Analyzer Modules Declassification & Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077014601
Déclassification
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259106
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259105
Utilisateur/Service combiné
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.1 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259104
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document supports TLA Application Software V6.1 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157506
Utilisateur principal
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174706
Utilisateur/Service combiné
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015801
Service
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.1 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003207
Aide en ligne
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014801
Vérification des performances
Tektronix Logic Analyzer Family
Product Safety & Compliance Instructions

This document supports TLA Application Software V6.0 and above. This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA6400 Series Logic Analyzer products.
Numéro de référence : 071259103
Utilisateur/Service combiné
Tektronix Logic Analyzer
Online Help Online Help

This document supports TLA Application Software V6.0 and above. This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003206
Aide en ligne
Tektronix
Logic Analyzer Family Quick Start User Manual.

This document supports TLA Application Software V6.0 and above. This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157505
Utilisateur principal
020-2664-01
TLA6400 Series Logic Analyzer & TLA7012 Portable Mainframe Rackmount Kit Instructions

This document supports TLA application software V6.0 and above. This document contains information to install a TLA7012, TLA6200 series logic analyzer, or TLA6400 series logic analyzer in an instrument rack.
Numéro de référence : 071175001
Instructions d’installation sur site
TLA7BXX Series
Logic Analyzers Product Specifications & Performance Verification Technical Reference

Supports TLA SW V5.6+. This document lists the TLA7Bxx logic analyzer module specifications and provides performance verificaiton procedures.
Numéro de référence : 077014800
Vérification des performances
TLA7ACx
Tektronix Logic Analyzer Module Service Manual

This document supports TLA SW V5.6+. Use this manual to service the TLA7ACx series logic analzyer modules.
Numéro de référence : 077015800
Service
Tektronix Logic Analyzer Series
Product Specifications & Performance Verification Technical Reference

Supports TLA SW 5.6+. This document contains product specifications for several of the TLA products. It also procedures for verifying the performance of the TLA products.
Numéro de référence : 077176303
Vérification des performances
Tektronix Logic Analyzer
Online Help Software Version 5.8 Online Help

This document is a PDF version of the Tektronix Logic Analyzer online help. The online help is available with the latest TLA Application Software.
Numéro de référence : 077003205
Aide en ligne
TLA7000 Series
Logic Analyzers Installation Manual

This document provides information to install TLA7000 Series Logic Analyzers.
Numéro de référence : 077174705
Utilisateur/Service combiné
TLA Family
Product Safety & Compliance Instructions

This document contains safety, environmental, and compliance information for your Tektronix TLA7000 Series and TLA5200B Series Logic Analyzer products.
Numéro de référence : 071259102
Utilisateur/Service combiné
Tektronix
Logic Analyzer Family Quick Start User Manual

This document provides high-level information on using the TLA Logic analzyer and includes high-level product specifications.
Numéro de référence : 077157504
Utilisateur principal
TLA Pattern Generator Programmatic Interface, Rev A
PPI Online Help Online Help

The Pattern Generator Programmatic Interface (PPI) is based on COM/DCOM and has been deprecated.
Numéro de référence : 077039600
Aide en ligne
TLA Programmatic Interface, Rev A
TPI Online Help Online Help

Use these instructions to remotely control a TLA logic analyzer using TPI.com. The TPI.(COM/DCOM) interface has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077039700
Aide en ligne
TLA7BXX
Logic Analyzer Modules Service Manual

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 077014700
Service
TLA7KUP
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 077174904
Instructions d’installation sur site
TLAScript, Rev A
Graphical Interface Online Help

The TLAScript software (COM/DCOM) has been deprecated. Tektronix recommends using TPI.NET to remotely control your logic analyzer.
Numéro de référence : 077003400
Aide en ligne
TLA7KUP Instructions
Logic Analyzer Field Upgrade Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071174903
Instructions d’installation sur site
TLA7012 Rev A
Tektronix Logic Analyzer Declassification and Security Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Numéro de référence : 077003900
Déclassification
TLA7000 Series Installation Manual
Logic Analyzers Installation Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071174703
Utilisateur
TLASWUP Instructions
Software Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 075086003
Instructions d’installation sur site
TLA708EX TekLink Instructions
8-Port Instrument Hub and Expander Instructions

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Numéro de référence : 071176501
Utilisateur
TLA7000 Series Technical Reference
Mainframe Technical Reference

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Numéro de référence : 071176400
Service
020-2369-02 Instructions
TLA72X, TLA7XM, TLA7016 Benchtop Mainframe Rackmount Installation Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071089701
Instructions d’installation sur site
020-2644-00 Instructions
TLA7012 Portable Mainframe Logic Analyzer Rackmount Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Numéro de référence : 071175000
Instructions d’installation sur site
TLA iView Update, V6.1.137
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4104C

Numéro de référence : 066043922
Application
TLA iView update V6.1.134
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: DPO2012B, DPO2014B …

Numéro de référence : 066043921
Application
TLA iView update V6.1.132
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO3012, MDO3014 …

Numéro de référence : 066043920
Application
TLA iView update V6.1.129
This is an update to the iView support that was released with TLA Software V6.1.127. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: MDO4014B-3, MDO4034B …

Numéro de référence : 066043919
Mettre à jour
TLA Application Software V6.1.127
New feature release includes data import (TDI), MSO/MDO digital channel support, iView over Ethernet, auto-threshold, single-install for PCIe3 support and other enhancements. Includes improvements to stability and functionality. See ReleaseNotes …

Numéro de référence : 066037131
Application
TLACAL PERFORMANCE VERIFICATION SOFTWARE V6.0.213
TLACal is calibration, performance verification and deskew adjust software for LA modules and their compatible probes.

Numéro de référence : 066132703
Utilitaires
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE, V2.4.151
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V5.8.151 TLA Application.

Numéro de référence : 066044538
Application
TLA7Sxx-TLA7SAxx PCI EXPRESS SUPPORT SOFTWARE V6.0.267.0
PCI Express support package used with TLA7S08, TLA7S16, TLA7SA08 and TLA7SA16 Serial Analyzer modules. Compatible with V6.0.267 TLA Application.

Numéro de référence : 066044539
Application
TLA Application Software V6.0.267
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.Includes firmware updates to TLA7Ax and TLA7Bx modules.Includes iView(TM) support for Tektronix MDO4054, MDO4104, MSO72004 …

Numéro de référence : 066037129
Application
TLA Application Software V5.8.151
Maintenance release includes improvements to stability and functionality. See ReleaseNotes.txt for a complete list of changes.

Includes firmware updates to TLA7Ax and TLA7Bx modules.

Includes iView(TM) support for Tektronix MDO4054 …

Numéro de référence : 066037128
Application
DSI and CSI2 support software V1.1.025
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132701
Application
DSI and CSI2 support software V1.0.003.1
TLA support package for use with DPHYPRE preprocessor

Numéro de référence : 066132700
Application
TLA iView update
This is an update to the iView support that was released with TLA Software V5.8.027 or earlier. It supports direct USB connections to Tektronix oscilloscopes that have a Type B USB connector. It adds iView support for these oscilloscopes: TDS2001C …

Numéro de référence : 066043918
Mettre à jour
TLA Application Software
Includes support for TLA6000 Series Logic Analyzers.Includes support for Compound Clocking (multiple clocks and qualifiers, formerly known as Advanced Clocking Mode) in the LA Setup window.Provides an updated firmware image for the TLA7Bxx modules …

Numéro de référence : 066037122
Application
TLA Application Software V5.6.754
Includes support for new TLA7ACx, TLA7BBx, and TLA7BC4 modules.The LA Setup window has been redesigned for improved usability.A new version of TekVISA(TM) provides significant improvements in the area of network connectivity.It cannot be installed on …

Numéro de référence : 066037119
Application
TLA7S08-S16 PCI EXPRESS SUPPORT SOFTWARE v2.0231.1
This is version 2.0.231.1 of the PCI Express support package used with TLA7S08 and TLA7S16 modules.

Numéro de référence : 066044534
Application
TLA TO RSA CONVERSION TOOL
This plug-in tool is designed to run within the TLA Application Software to convert an acquired digital I & Q signal for loading into a Tektronix Real-Time Spectrum Analyzer, or the RSAVu offline software, enabling modulation analysis to be performed …

Numéro de référence : 066100700
Utilitaires
TLA APPLICATION REGISTRY PATCH
This patch should be applied to all TLA700 and TLA7000 products, and all PCs after V5.1 SP1 of the TLA Software Application (WebID 5177) has been installed. It corrects a registry setting that can cause application errors when acquiring glitches.

Numéro de référence : 066085900
Application
TLA APPLICATION SOFTWARE V5.1 SP1
This release is a full maintenance release of the TLA Software Application. After installing, the TLA APPLICATION REGISTRY PATCH (WebID 5360) should also be installed. This release also adds iView support for TDS1000B/TDS200B, TDS1001/TDS2004 …

Numéro de référence : 066037106
Application
Tektronix / FS2 - Collaboration on real-time logic debug solution for Xilinx FPGAs
Article produit
Tektronix delivers complete DDR memory test bench
Article produit
Tektronix and FS2 Answer Debug Challenges for Altera FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Altera FPGA and surrounding hardware.

Numéro du document : 52W-19639-0
Fiche d’informations
Verify and debug DDR2 memory systems
Dossier technique
Tektronix and FS2 Answer Debug Challenges for Xilinx FPGAs
In this fact sheet find out how the FS2 FPGAView software, when used with a Tektronix TLA Series logic analyzer, provides a complete solution for debugging your Xilinx FPGA and surrounding hardware.

Numéro du document : 52W-20066-0
Fiche d’informations
Tektronix develops comprehensive test for Intel QuickPath interconnect
Article produit
Companies Collaborate on Debug software for Altera FPGAs
Article produit
Command & Protocol Verification of DDR+ DDR2+ and DDR3 SDRAM
Computer memories are not the only systems that continue to demand larger, faster, lower powered and physically smaller memories. Embedded systems design applications have similar requirements. This application note highlights the power of the logic …

Numéro du document : 52W-19236-2
Note d’application
Cross-bus Analysis Reveals Interactions and Speeds Troubleshooting
Cross-bus analysis has become an indispensable troubleshooting methodology. This application note discusses how the powerful new logic analysis solution from Tektronix can speed your cross-bus troubleshooting requirements

Numéro du document : 52W-21073-0
Note d’application
Introduction to Mixed Signal Test Solutions
As the complexity of today’s electronic designs rises with the increase in digital and serial content, the boundaries that define the optimum piece of test equipment can become unclear. Engineers are working with “mixed-signal” designs, which contain …

Numéro du document : 3GT-20213-3
Livre blanc
Timing Error Debugging
New Designs, New HeadachesNew digital devices have become progressively more powerful by incorporating high-speed buses, subsystems, and logic families. They have also become more complex, more sensitive to signal quality, and more time consuming to …

Numéro du document : 55W-18497-0
Note d’application
On the Bleeding Edge: Tektronix Logic Analyzers Enable Tundra Semiconductor to Develop First RapidIO Switches and Get to Market Faster
Challenge: Design, verify and debug the industry’s first silicon switches supporting parallel and serial RapidIO® Solution: Tektronix TLA7000 Series logic analyzer with TMS805 RapidIO application support package that enables 800 MHz state …
Étude de cas
Faster Logic Analyzer Mainframes+ New Software Speed Debugging
Article produit
Test methodologies for high-speed serial designs
Article produit
EDN Selects Tektronix Logic Analyzer as Finalist for Innovation of the Year
Prix
Simplifying Xilinx and Altera Debug
This application note focuses on the issues and techniques that can help you become more efficient when debugging your FPGA systems.

Numéro du document : 52W-20065-3
Note d’application
Suggested Clocking Modes for Acquiring Flash and DRAM Memories with a TLA Series Logic Analyzer
An analysis of ST Microelectronics' M58WR064EB Flash memory and Micron Technology's MT48H4M16LFSynchronous DRAM shows that a fairly fast sampling speed will be required to capture all the signals of interestwith adequate resolution. The obvious …

Numéro du document : 52-19153-0
Note d’application
Serial Analyzers for PCIe 2.0 Provide Power Management and Cross Bus Analysis
Article produit
New Tektronix Logic Analyzer Named to Hot 100 List
Prix
Debugging Timing Problems with a Logic Analyzer
In today’s digital world, embedded systems designs are more complex than ever. With the use of faster speeds, lower power devices and more powerful logic, they are becoming increasingly sensitive to signal integrity issues. This application note will …

Numéro du document : 52W-23621-0
Fiche d’informations
Serial analyzers support PCI Express 2.0
Article produit
Serial analyzers add to comprehensive PCI Express 2.0 testing
Article produit
Logic Analyzer Fundamentals
Like so many electronic test and measurement tools, a logic analyzer is a solution to a particular class of problems. It is a versatile tool that can help you with digital hardware debug, design verification, and embedded software debug. The logic …

Numéro du document : 52W-14266-5
Guide de présentation
Select the Correct Debug Methodology for Your Altera FPGA Design
Debug can on average take up to 50% of the development time, particularly when looking for a difficult issue. We therefore need to use innovative ways to speed up the flow. Tektronix, First Silicon Solutions (FS2), and Alterahave teamed up to provide …

Numéro du document : 54W-21382-0
Note d’application
Serial Analyzers Deliver Comprehensive PCIe Testing
Article produit
Logic Analyzer Triggering Techniques to Capture Elusive Problems
For digital designers who need to verify and debug their product designs, logic analyzers provide breakthrough triggering features that capture real-time digital system operation. This application note explains how to use logic analyzer triggering to …

Numéro du document : 52W-18368-0
Note d’application
Logic analyzer goes PCI Express
Article produit
Understanding and Performing RapidIO Testing
RapidIO architecture delivers significantly increased transmission speeds to enable the design of next-generation networking and communications equipment, but with it comes compliance and interoperability issues. Tektronix comprehensive tool set …

Numéro du document : 5AW-16056-0
Note d’application
Real-time Debugging Measures Signals Without Recompiling
Article produit
Quick Signal Integrity Troubleshooting with Integrated Logic Analyzers & Oscilloscopes
Fast product development requires fast and efficient troubleshooting of signal integrity problems. Signal integrity is a growing priority as digital system designers pursue ever-higher clock and data rates in their designs. To ensure signal integrity …

Numéro du document : 58W-17254-1
Note d’application
RapidIO Architecture: Building the Next-Generation Networking Infrastructure
RapidIO®, a high-performance, packet-switched bus technology, delivers the bandwidth, software independence, fault tolerance and low latency needed for the design of next-generation networking equipment in the communications market.

Numéro du document : 5AW-16056-0
Dossier technique