This application note gives a procedure for performing quick checks on an Analog to Digital Converter (ADC) system gain, offset and linearity. The technique uses a ramp signal from a function generator to stimulate the system, including signal conditioning at the ADC front end. A mixed signal oscilloscope (MSO) is used to look at both the signal into the system, as well as the digital signals out of the ADC to evaluate conversion. In this case, the MSO is used to uncover a problem with offset error.
Contactez-nous
Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.
Téléphone
Appelez-nous au
Disponible de 9 h à 17 h CET jours ouvrables.
Télécharger
Télécharger des manuels, des fiches techniques, des logiciels, etc. :
Feedback