Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

USB Power Compliance Solution Datasheet

USBPWR Automated

Features and Benefits

Compliance Testing
  • Compliance testing to the USB2.0 Battery Charger Specification V1.1 and IEC 62684
  • Complete set of real-time measurements using an oscilloscope, builds confidence in design under test
Automated Testing
  • Saves significant amount of test time compared to manual methods of performing the same tests, and increases manufacturing throughput
  • Reduces operator errors, and improve yields
  • Avoids the need to be an expert in compliance test procedures
  • Provides repeatability of test results
Reports
  • A single printable test report of all tests simplifies sharing and archiving of test results

Applications

  • Compliance testing of USB battery chargers with permanent cable
  • Compliance testing of USB battery chargers with detachable cable
  • External power supply (EPS) design and Compliance testing to IEC62684 specification
  • System integration and validation of data enabled mobile telephones that use USB 2.0 interface for battery charging
  • Manufacturing test
  • The Tektronix MSO/DPO5000, DPO7000C, and DPO/DSA/MSO70000C series oscilloscopes enabled with option USBPWR provide automated setup for design validation and compliance testing of USB battery chargers and external power supplies. The Tektronix USBPWR solution serves the needs of engineers designing USB based battery chargers and external power supplies, as well as those validating the electrical compliance of the devices to the new IEC62684 Specification and USB 2.0 Battery Charger specification v1.1.

Automated Testing – Save Time and Resources

There is no longer a need to be an expert on IEC62684 testing procedures. Remembering the exact steps to take each measurement is time consuming and often requires going back to the IEC62684 specification and the USB battery charging specification. USBPWR Automated Solution takes the guesswork out of conducting compliance testing.

For compliance testing, it is difficult to remember the test procedures or to set up the correct parameters, such as applying the correct record length and sampling rates. USBPWR Automation Solution provides standard specific details and predefined scope settings for each measurement, so the user does not need to be an expert. USBPWR Automated Solution minimizes the setup initialization problems, reduces the complexity of executing USBPWR tests and enables you to test designs faster.

USBPWRAutomatedUSBPowerComplianceSolution-2-N

USBPWR solution automatically configures the oscilloscope settings, and acquires signals with predefined compliance parameters

100% Test Coverage

USBPWR automates the complete set of measurements to be performed using a real-time oscilloscope for devices with permanent cable as well as designs with detachable cable. Measurements include:

  • Ripple Voltage for the combination of the following settings:
    • AC frequency: 47 Hz, 50 Hz, 60 Hz, and 63 Hz
    • AC voltage: 90 V, 120 V, 207 V, and 253 V
    • Load: 0%, 25%, 50%, 75%, and 100% of the rated output current
    • Temperature: 0 °C, 25 °C, and 45 °C
  • AC Voltage Frequency Component
  • Maximum Slew
  • Common Mode Voltage at the following frequency bands:
    • 100 kHz-400 kHz
    • 1 kHz-100 kHz
    • 1 MHz-100 MHz
    • 400 kHz-1 MHz
USBPWRAutomatedUSBPowerComplianceSolution-3-N

USBPWR solution provides 100% test coverage of compliance tests using an oscilloscope

Results

USBPWR Results section helps design engineers look at the test results quickly and clearly for pass or fail summary. It provides visual representation of pass/fail status and test execution status in color codes.

USBPWRAutomatedUSBPowerComplianceSolution-4-N

USBPWR provides quick summary of test results

Detailed Reports

The USBPWR automation generates thorough .MHT/.XLS/HTML reports that capture the details of each test including Limits, Measured Value, Pass/Fail Results, Margin, common mode voltage plots, frequency component plot, etc. It also captures test execution time, and hyper-links to saved test waveforms for each test. Report generation also provides features such as report appending, auto incrementing report naming, inserting user comments, etc. Reports appending feature enables adding results from different test conditions and test scenarios, and create a single-printable-report for sharing the results.

USBPWRAutomatedUSBPowerComplianceSolution-5-N

USBPWR report contents are configurable for additional details

USBPWRAutomatedUSBPowerComplianceSolution-6-N

USBPWR provides detailed reports
 

Characteristics

Characteristic

Description

Specifications

IEC62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones

USB-IF USB 2.0 Battery Charging Spec V1.1 (USB BC 1.1)

Tests Coverage

Ripple Voltage for combination of following settings:

   AC frequency: 47 Hz, 50 Hz, 60 Hz and 63 Hz

   AC voltage: 90 V, 120 V, 207 V and 253 V

   Load: 0%, 25%, 50%, 75% and 100% of the rated output current

   Temperature: 0 °C, 25 °C and 45 °C

AC Voltage Frequency Component

Maximum Slew

Common Mode Voltage at following frequency bands:

   100 KHz - 400 KHz

   1 KHz - 100 KHz

   1 MHz - 100 MHz

   400 KHz - 1 MHz

Report Generation Format

.xls, .mht, and HTML

Ordering Information

Option USBPWR

USB Power Adapter/ EPS Compliance Automated Test Solution

Model

New Instrument Orders

Product Upgrades

Floating Licenses

MSO/DPO5000/GSA

Series (350 MHz and above)

Opt. USBPWR

DPO-UP Opt.USBPWR

DPOFL-USBPWR

DPO7000C/GSA Series

Opt. USBPWR

DPO-UP Opt.USBPWR

DPOFL-USBPWR

**DPO/DSA/MSO70000C/GSA

Series

Opt. USBPWR

DPO-UP Opt.USBPWR

DPOFL-USBPWR

** D-Series oscilloscopes are not supported for Option USBPWR

Recommended Accessories

One set of TPP0500, TPP1000, P6139B, or P5100A probes with standard accessories is recommended. Additionally, one set of TCA-BNC converter and TCA-1MEG TekConnect 1 MΩ Adapter is recommended when using a P6139B or P5100A probe with a DPO/DSA/MSO70000C/GSA series oscilloscope. Please refer to www.tek.com/probes for further information on the recommended models of probes and any necessary probe adapters.

Additional Information

Tektronix offers a range of solutions for power analysis and compliance testing. To see comprehensive listing, and download the latest resources, visit www.tek.com/power. USBPWR solution updates and up-to-date instrument software upgrades are available at www.tek.com/downloads