Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

Tektronix Logic Analyzers

TLA6000 Series

Les produits figurant sur cette fiche technique ne sont plus vendus par Tektronix.
Référez-vous à Tektronix Encore pour les équipements de test reconditionnés.
Consultez l'assistance et les informations de garantie pour ces produits.

Features & Benefits

  • Comprehensive Set of Signal Integrity Tools that Allow You to Quickly Isolate, Identify, and Debug Complex Signal Integrity Issues
    • Glitch Trigger and Storage – Allows you to trigger on and highlight potential signal integrity problems. Not only can the TLA6000 Series trigger on the problem, but by highlighting suspected problems in red, you will be able to easily determine which signals you need to investigate further
    • iCapture – Route the suspected signal to the analog output of the TLA6000 using the exclusive Tektronix iCapture feature. This eliminates the need to double-probe with an oscilloscope probe, reducing time to debug
    • iView – Time-correlated view of both logic analyzer and oscilloscope data to trace the SI problem across the digital and analog domain
  • Performance and Ease of Use to Debug, Validate, and Optimize Digital Systems
    • 125 ps Resolution MagniVu™ Acquisition to Accurately See Signal Relationships in Your System
    • State Speed – Sample your fastest synchronous buses with clock rates up to 800 MHz and data rates up to 1.25 Gb/s
    • 15 in. Display, with Optional Touch Screen to See More of Your Data and Navigate Efficiently through Your Data
    • 3 Models with 68/102/136 Channels and Up to 128 Mb Record Length offer Flexible Solutions to Fit Any Budget
    • Drag-and-Drop Triggering – Simply drag any one of eight different trigger types from a table onto the waveform and the TLA will automatically set up the trigger conditions. Eliminates errors, improves repeatability, and saves time
    • Drag-and-Drop Measurements – Simply drag an icon from the measurement toolbar and drop it on your signal of interest and get a table of results. Saves time, removes complexity, and reduces measurement uncertainty
  • Analysis Tools for Debugging and Validating Today’s Digital Systems
    • FPGA
    • DDR2
    • A Broad Selection of Microprocessor and Bus Support
    • MIPI CSI and DSI Debug

Applications

  • Digital Hardware Validation and Debug
  • Monitoring, Measurement, and Optimization of Digital Hardware Performance
  • Embedded Software Integration, Debug, and Verification

Efficiently Debug and Validate Your Digital System at a Price You Will Like!

The affordable TLA6000 Series of logic analyzers offer the performance needed to debug, validate, and optimize the functionality of your digital system. The TLA6000 Series also provides a comprehensive set of signal integrity debug tools that allow you quickly isolate, identify, and characterize elusive and hard-to-find problems. Add a broad range of support for today’s applications, and you have the ideal tool to help you meet all of the debug challenges of today’s digital designs.

The TLA6000 Series allows you to effectively validate and debug the functionality of your digital designs:

  • Use the patented 8 GHz MagniVu technology to accurately measure timing relationships. The single, integrated acquisition architecture of the TLA6000 Series eliminates the timing skew problems inherent in other logic analyzer architectures
  • Capture on buses with clock rates up to 800 MHz and data rates up to 1.25 Gb/s
  • Buy the capability you need now and upgrade as your measurement needs grow
  • Quickly isolate events through a simple and intuitive drag-and-drop trigger setup
  • Easily summarize your design’s performance with sophisticated drag-and-drop measurements such as frequency, period, pulse width, duty cycle, and edge count
  • View data in a variety of time-correlated formats including waveform, listing, graph, disassembly, source code, or compare

Find Tough Signal Integrity Problems

Today’s logic analyzers not only need to help troubleshoot functional issues in your design, but also need to help find signal integrity problems caused by crosstalk, termination mismatches, ground bounce, and other issues. To help debug these problems, the TLA6000 Series includes a comprehensive suite of signal debug tools.

These tools allow you to:

  • Use glitch trigger to monitor selected signals in your design and trigger when a signal integrity problem is found on any one of these signals
  • Automatically tag any found signal integrity problems, allowing you to quickly identify the signals of interest
  • Gain more insight into the problem using the exclusive iCapture functionality to view both digital and analog data through a single probe
  • Use iView to see time-correlated digital and analog displays of your data, letting you track the signal integrity problem across both analog and digital domains

DDR2 Protocol Debug and Validation

DDR2 memory systems are used in many of today’s embedded system designs – commonly implemented as a bus on the microprocessor or as a block in an FPGA. The complexity of the DDR2 protocol and the number of command/data/address signals make it difficult to both visualize the operation of the bus and to isolate any potential problems. In addition, designers need to ensure that signal timing and interfaces comply with JEDEC standards. The TLA6000 DDR2x8 and DDR2x16 options provide a complete, easy-to-use DDR2 test solution for embedded DDR2 designs up to DDR2-800 using x4, x8, and x16 data-width DDR2 devices.

These options consist of set of tools designed to provide visibility to all address, data, and control signals. The bundle includes:

A003_0921-N

Memory Chip Interposer.

A003_0922-N

Protocol Decode Software.

A003_0923-N

DDR Analysis.

  • Memory chip interposers that provide a convenient way of probing embedded DDR memory systems and eliminates the need to design in probe access points. These memory chip interposers work with the unique iCapture™ Analog Mux feature of the TLA6000 to provide a single probing solution for both the logic analyzer and oscilloscope, saving time and minimizing setup complexity
  • Protocol decode software that shows all of the DDR2 transactions as well as providing triggering on DDR2 events
  • Sample-point analysis software that automates the process of correctly configuring the TLA6000 Series to accurately sample the DDR2 signals
  • Protocol violation software that finds and reports violations of the JEDEC-defined DDR2 protocol

TLA6000 Selection Guide

Characteristic

TLA6202

TLA6203

TLA6204

Channels

68

102

136

High-speed Timing

8 GHz (125 ps) with 16 Kb record length

Maximum Timing Sample Rate (Quarter/Half/Full channel)

2 GHz / 1 GHz / 500 MHz

Maximum State Clock Rate (Quarter/Half/Full channel)

450 MHz / 450 MHz / 235 MHz (standard)

625 MHz / 800 MHz / 450 MHz (with Option 45)

Maximum State Data Rate (Quarter/Half/Full channel)

900 Mb/s / 470 Mb/s / 235 Mb/s (standard)

1.25 Gb/s / 900 Mb/s / 450 Mb/s (with Option 45)

Maximum Record Length

2 Mb (standard)

8 Mb with Option 1S

32 Mb with Option 2S

128 Mb with Option 3S

Analog Mux

4 fixed channels (standard)

Any signal (user selectable) may be routed to 4 output BNCs with Option AM

Probing Options

P6810 General-purpose probe with Option 1P – supports single-ended and differential signals

Mictor connections with Option 2P

P6960 D-Max probe with Option 3P

 

Characteristics

General

Characteristic

Description

Number of Channels (All channels are acquired including clocks)

   TLA6202

68 channels (4 are clock channels)

   TLA6203

102 channels (4 are clock and 2 are qualifier channels)

   TLA6204

136 channels (4 are clock and 4 are qualifier channels)

   Channel grouping

No limit to number of groups or number of channels per group (all channels can be reused in multiple groups)

Time Stamp

51 bits at 125 ps resolution (3.25 days duration)

Clocking/Acquisition Modes

Asynchronous/Synchronous 8 GHz MagniVu high-speed timing is available simultaneous with all modes

Expansion Capability

The TLA6000 Series can be used as either a master or expansion mainframe in systems consisting of up to 8 TLA6000/TLA7000 instruments. A TL708EX Instrument Hub and Expander is required when connecting 3-8 instruments together using TekLink™ cables

PC Characteristics

Characteristic

Description

Operating System

Microsoft® Windows® XP Professional and Multilingual User Interface Pack

Processor

2.2 GHz Intel Core 2 Duo T7500

Chipset

Intel® 965GME

Memory

1 GB DDR2 expandable to 2 GB DDR memory

Sound

Line In, Line Out, and Mic Out connectors

Removable Hard Drive

3.5 in., ≥80 GB Serial ATA, 7200 RPM

Optical Drive

Internal 4.7 GB DVD±R/RW

External Display Port Type

One (1) DVI-I (primary – digital and analog) connector and one (1) VGA connector

External Display Resolution

Up to 1600×1200 noninterlaced at 32-bit color, each for both primary and secondary displays

Network Port

Two (2) 10/100/1000 LAN with RJ-45 connector

USB 2.0 Port

Seven (7); three (3) in front and four (4) in rear

Integral Controls

Characteristic

Description

Front-panel Display

Size: 15 in. (38.1 cm) diagonal

Type: Active-matrix color TFT LCD with backlight

Resolution: 1024×768

Simultaneous Display Capability

Both the front-panel and one external display can be used simultaneously at 1024×768 resolution

Front Panel

General-purpose knob with dedicated hotkeys and knobs for horizontal and vertical scaling and scrolling

Touch Screen

Available with Option 18

Integrated View (iView™) Capability

Characteristic

Description

TLA Mainframe Configuration Requirements

GPIB-iView (Opt. 1C) requires TLA Application Software V5.0 or greater

 

USB-iView (Opt. 2C) requires TLA Application Software V5.8 or greater

Number of Tektronix Oscilloscopes that can be Connected to a TLA System

1

External Oscilloscopes Supported

More than 100. For a complete listing of currently supported oscilloscopes, please visit our website http://www.tektronix.com/iview

TLA Connections

USB, Trigger In, Trigger Out, Clock Out

Oscilloscope Connections

   GPIB-iView

   (Opt. 1C)

GPIB, Trigger In, Trigger Out, Clock In (when available)

   USB-iView

   (Opt. 2C)

USB Device Port, Trigger In, Trigger Out

Setup

iView™ external oscilloscope wizard automates setup

Data Correlation

After oscilloscope acquisition is complete, the data is automatically transferred to the TLA and time correlated with the TLA acquisition data

Deskew

The oscilloscope and TLA data is automatically deskewed and time correlated when using the iView™ external oscilloscope cable

GPIB-iView™ (Opt. 2C) External Oscilloscope Cable Length

2 m (6.6 ft.)

USB-iView (Opt. 2C) External Oscilloscope Cable Length

2 m (6 ft.)

Symbolic Support

Characteristic

Description

Number of Symbols/Ranges

Unlimited (limited only by amount of virtual memory available on TLA)

Object File Formats Supported

IEEE695, OMF 51, OMF 86, OMF 166, OMF 286, OMF 386, COFF, Elf/Dwarf 1 and 2, Elf/Stabs, TSF (If your software development tools do not generate output in one of the above formats, TSF, or the Tektronix symbol file, a generic ASCII file format is supported. The generic ASCII file format is documented in the TLA User Manual). If a format is not listed, please contact your local Tektronix representative

External Instrumentation Interfaces

Characteristic

Description

System Trigger Output

Asserted whenever a system trigger occurs (TTL-compatible output, back-terminated into 50 Ω)

System Trigger Input

Forces a system trigger (triggers all modules) when asserted (adjustable threshold between 0.5 V and 1.5 V, edge sensitive, falling-edge latched)

External Signal Output

Can be used to drive external circuitry from a module's trigger mechanism (TTL-compatible output, back-terminated into 50 Ω)

External Signal Input

Can be used to provide an external signal to arm or trigger any or all modules (adjustable threshold between 0.5 V and 1.5 V, level sensitive)

Power

Characteristic

Description

Voltage Range/Frequency

90-250 V AC at 45-66 Hz, 100-132 V AC at 360-440 Hz

Input Current

7 A maximum at 90 V AC (70 A surge)

Power Consumption

750 W maximum

Environmental

Characteristic

Description

Temperature

Operating: +5 °C to +45 °C

Nonoperating: –20 °C to +60 °C

Humidity

20% to 80%

Operating: ≤30 °C; 80% relative humidity (29 °C maximum wet-bulb temperature)

Nonoperating: 8% to 80% (29 °C maximum wet-bulb temperature)

Altitude

Operating: –1,000 ft. to 10,000 ft. (–305 meters to 3,050 meters)

Safety

UL3111-1, CSA1010.1, EN61010-1, IEC61010-1

Physical Characteristics

Dimensions

mm

in.

Height

295

11.6

Width

451

17.75

Depth

460

18.1

Weight

kg

lb.

Net

17.1

36.7

Shipping (Typical)

30.1

66.7

Input Characteristics (with P6800 or P6900 Series probes)

Characteristic

Description

Capacitive Loading

0.5 pF clock/data (P6900 Series)

<0.7 pF clock/data (P6800 Series)

(1.0 pF for P6810 in group configuration)

Threshold Selection Range

From –2.0 V to +4.5 V in 5 mV increments

Threshold presets include TTL (1.5 V), CMOS (1.65 V), ECL (–1.3 V), PECL (3.7 V), LVPECL (2.0 V), LVCMOS 1.5 V (0.75 V), LVCMOS 1.8 V (0.9 V), LVCMOS 2.5 V (1.25 V), LVCMOS 3.3 V (1.65 V), LVDS (0 V), and user defined

Threshold Selection Channel Granularity

Separate selection for each of the clock/qualifier channels and one per group of 16 data channels for each 34-channel probe

Threshold Accuracy (including probe)

±(35 mV + 1%)

Input Voltage Range

   Operating

–2.5 V to 5.0 V

   Nondestructive

±15 V

Minimum Input Signal Swing

300 mV (single ended)

MAX – VMIN > 150 mV (differential)

Input Signal Minimum Slew Rate

200 mV/ns typical

A000_1292-N

State Acquisition Characteristics{C}{C}{C}{C}{C}(with P6800 or P6900 Series probes)

Full Channel

Half Channel

Quarter Channel

   

235 MHz

450 MHz / 450 Mb/s or 470 Mb/s (DDR)

450 MHz / 900 Mb/s

450 MHz Optional

800 MHz / 800 Mb/s or 900 Mb/s (DDR)

625 MHz / 1.25 Gb/s

Note: When using SQUIRE adapters, the maximum clock rate / data rate is 300 MHz / 600 Mb/s.

Characteristic

Description

State Record Length with Time Stamps

(Quarter/Half/Full channels) 8/4/2 Mb, 32/16/8 Mb, 128/64/32 Mb, 512/256/128 Mb per channel

Setup-and-Hold Time Selection Range

From 16 ns before, to 8 ns after clock edge in 125 ps increments. Range may be shifted towards the setup region by 0 ns [+8, –8] ns, 4 ns [+12, –4] ns, or 8 ns [+16, 0] ns

Setup-and-Hold Window

   All channels

625 ps typical

   Single channel

500 ps typical

Minimum Clock Pulse Width

500 ps, 700 ps (P6810)

Active Clock Edge Separation

400 ps

Demux Channel Selection

Channels can be demultiplexed to other channels through user interface with 8-channel granularity

Timing Acquisition Characteristics{C}{C}{C}{C}{C}(with P6800 or P6900 Series probes)

Characteristic

Description

MagniVu™ Timing

125 ps max, adjustments to 250 ps, 500 ps, 1 ns, and 2 ns

MagniVu Timing Record Length

16 Kb per channel, with adjustable trigger position

Deep Timing Resolution (Quarter/Half/Full channels)

500 ps / 1 ns / 2 ns to 50 ms

Deep Timing Resolution with Glitch Storage Enabled

4 ns to 50 ms

Deep Timing Record Length (Quarter/Half/Full channels with time stamps and with or without transitional storage)

8/4/2 Mb, 32/16/8 Mb, 128/64/32 Mb, 512/256/128 Mb per channel

Deep Timing Record Length with Glitch Storage Enabled

Half of default main memory depth

Channel-to-Channel Skew

300 ps typical

Minimum Recognizable Pulse/Glitch Width (Single channel)

500 ps (P6960, P6964, P6980, P6982, P6860, P6864, P6880), 750 ps (P6810)

Minimum Detectable Setup/Hold Violation

250 ps

Minimum Recognizable Multichannel Trigger Event

Sample period + channel-to-channel skew

Analog Acquisition Characteristics{C}{C}{C}{C}{C}(with P6800 or P6900 Series probes)

Characteristic

Description

Bandwidth

2 GHz typical

Attenuation

10X, ±1%

Offset and Gain (Accuracy)

±50 mV, ±2% of signal amplitude

Channels Demultiplexed

4

Run/Stop Requirements

None, analog outputs are always active

iCapture™ Analog Outputs

Compatible with any supported Tektronix oscilloscope

iCapture Analog Output BNC Cable

Low loss, 10X, 36 in. Basic Analog Multiplexer functionality is offered standard on all TLA6000 models. This routes 4 fixed channels to the iCapture Analog Output BNCs. The outputs cannot be switched to other logic analyzer channels. Option AM enables full analog multiplexer control and allows the routing of any 4 logic analyzer channels to the iCapture Analog Output BNCs

Trigger Characteristics

Characteristic

Description

Independent Trigger States

16

Maximum Independent If/Then Clauses per State

16

Maximum Number of Events per If/Then Clause

8

Maximum Number of Actions per If/Then Clause

8

Maximum Number of Trigger Events

18 (2 counters/timers plus any 16 other resources)

Number of Word Recognizers

16

Number of Transition Recognizers

16

Number of Range Recognizers

4

Number of Counters/Timers

2

Trigger Event Types

Word, Group, Channel, Transition, Range, Anything, Counter Value, Timer Value, Signal, Glitch, Setup-and-Hold Violation, Snapshot

Trigger Action Types

Trigger Module, Trigger All Modules, Trigger Main, Trigger MagniVu, Store, Don't Store, Store Sample, Increment Counter, Decrement Counter, Reset Counter, Start Timer, Stop Timer, Reset Timer, Snapshot Current Sample, Goto State, Set/Clear Signal, Do Nothing

Maximum Triggerable Data Rate

1250 Mb/s (4X clocking mode)

Trigger Sequence Rate

DC to 500 MHz (2 ns)

Counter/Timer Range

51 bits each (>50 days at 2 ns)

Counter Rate

DC to 500 MHz (2 ns)

Timer Clock Rate

500 MHz (2 ns)

Counter/Timer Latency

2 ns

Range Recognizers

Double bounded (408 channel max). Can be as wide as any group, must be grouped according to specified order of significance

Setup-and-Hold Violation Recognizer Setup Time Range

From 8 ns before to 7 ns after clock edge in 125 ps increments. This range may be shifted towards the positive region by 0 ns, 4 ns, or 8 ns

Setup-and-Hold Violation Recognizer Hold Time Range

From 7 ns before to 8 ns after clock edge in 125 ps increments. This range may be shifted towards the positive region by 0 ns [+8, –8] ns, 4 ns [+12, –4] ns, or 8 ns [+16, 0] ns

Trigger Position

Any data sample

MagniVu Trigger Position

MagniVu position can be set from 0% to 60% centered around the MagniVu trigger

Storage Control

(Data qualification)

Global (conditional), by state (start/stop), block, by trigger action, or transitional. Also force main prefill selection available

 

Ordering Information

TLA6202

68-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length and/or up to 450 MHz state.

TLA6203

102-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length and/or up to 450 MHz state.

TLA6204

136-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length and/or up to 450 MHz state.

 

All Include: Mini Keyboard (119-7275-xx), Optical Wheel Mouse (119-7054-xx), Front-panel cover (200-4939-xx), TLA Application Software CD (063-3881-xx), Certificate of Traceable Calibration.

 

Note: Please specify probe, power, language, and service options when ordering.

Instrument Options

Option

Description

1P

Add full complement of P6810 (General-purpose) probes

2P

Add full complement of P6434 (Mictor) probes. Includes SQUIRE adapters

3P

Add full complement of P6960 (D-Max) probes

1S

Increase to 8 Mb record length

2S

Increase to 32 Mb record length

3S

Increase to 128 Mb record length

DDR2x8

DDR2 Analysis for x4 and x8 Devices; includes Socketed Memory Chip Interposer and necessary cables (TLA6203 and TLA6204 only) (requires TLA Application SW V5.8 or greater)

DDR2x16

DDR2 Analysis for x16 Devices; includes Socketed Memory Chip Interposer and necessary cables (TLA6204 only) (requires TLA Application SW V5.8 or greater)

45

Increase state speed to 450 MHz

AM

Add full analog mux control

18

Add touch screen

1C

Add GPIB-iView™ external oscilloscope cable kit (requires TLA Application SW V5.0 or greater)

2C

Add USB-iView external oscilloscope cable kit (requires TLA Application SW V5.8 or greater)

PO

Add accessory pouch

TL

Add TekLink cable

Recommended Accessories

Accessory

Description

Logic Analyzer Cart

   LACART

2-shelf Cart

   K4000

3-shelf Cart

016-1522-xx

Wheeled Transport Case

020-2664-xx

Rackmount Kit

650-4815-xx

Additional Removable Hard Drive Assembly; No SW

Power Plug Options

Option

Description

A0

North America power

A1

Universal Euro power

A2

United Kingdom power

A3

Australia power

A4

240 V, North America power

A5

Switzerland power

A6

Japan power

A10

China power

A11

India power

A12

Brazil power

A99

No power cord or AC adapter

Language Options

Option

Description

L0

English Manual

L5

Japanese Manual

L10

Russian Manual

L99

No Manual

Service Options

Option

Description

C3

Calibration Service 3 Years

C5

Calibration Service 5 Years

D1

Calibration Data Report

D3

Calibration Data Report 3 Years (with Option C3)

D5

Calibration Data Report 5 Years (with Option C5)

R3

Repair Service 3 Years

R5

Repair Service 5 Years

S1

On-site Service 1 Year

S3

On-site Service 3 Years (with R or C options)

R3DW

Repair Service Coverage 3 Years (includes product warranty period). 3-year period starts at time of instrument purchase

R5DW

Repair Service Coverage 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase

Upgrades

You can increase the state speed, memory depth, or add full analog multiplexer capability to existing TLA6000 models by ordering the appropriate upgrade kit. Please refer to the TLA Family Upgrade Guide for further details.