P6800/P6900 Series Datasheet

P6800/P6900 Series Logic Analyzer Datasheet
Les produits decette fiche technique ne sont plus commercialisés par Tektronix.

Lire en ligne :

Verification and debug of today's high speed, low voltage digital signals requires probing solutions that can accurately acquire from a wide variety of electronic designs and protect signal fidelity. Tektronix logic analyzer probes contain a variety of connectivity options that are engineered to ensure that signal acquisition is a true reflection of your design's performance.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

Key features
  • 20 kΩ input resistance
  • 6.5 Vp-p dynamic range supports a broad range of logic families
  • General-purpose probing allows flexible attachment to industry-standard connections
  • Connectorless probing system eliminates need for onboard connectors
Applications
  • Hardware debug and verification
  • Processor/Bus debug and verification
  • Embedded software integration, debug, and verification

Leading probe solutions for real-time digital systems analysis

P6800 and P6900 series probes

With the industry's lowest capacitance, the P6800 and P6900 Series logic analyzer probes for the TLA7000 Series protect the integrity of your signal - critical for connecting to fast buses where low intrusion is key to the proper operation of your design. Select from single-ended and differential probes and a variety of attachment mechanisms.

For applications where circuit board space is at a premium, the high-density P6900 Series with D-Max®Probing Technology offers the industry's smallest available footprint. For debugging the signal integrity glitches common on fast buses, the P6900 Series works with the TLA7Bxx and TLA7ACx modules and their iLink™ Tool Set capability to provide iCapture™ simultaneous digital-analog acquisition. This allows you to clearly see the time-correlated digital and analog behavior of your design, without the extra capacitance and setup time of double probing.

For differential signaling applications where signal integrity is critical, the high-fidelity P6980 and P6982 are perfect for those applications where noise performance is critical. In addition, the P6980 and P6982 can support the small voltage swings that differential signaling often requires. For board designs that do not include high-density probe footprints, the P6960 with its companion flying leadset or the P6910 provide the flexibility required to meet many different debug needs.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Compatible with TLA7AAx, TLA7ACx, TLA7NAx, TLA7BBx, TLA7BCx, and TLA6200

  P6860 P6910 P6960 P6962/P6964 P6980 P6982
Data Single-ended Differential Single-ended Single-ended Differential Differential
Clock Differential
Number of channels 34  34  34  34  34  17 
Recommended use Good signal density and quick reliable attachment. Not recommended for new designs. Use P6960 for new designs. General-purpose applications Best signal density and quick reliable attachment. Flying leads for general-purpose probing is optional. Data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) with the best signal density. Full differential probing with the best signal density. Full differential with the best signal density for data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx).
Attachment to target system Compression Elastomer Fits 0.100 in. square pin configurations; flying-leads, solder-in D-Max® probing technology compression cLGA D-Max® probing technology compression cLGA D-Max® probing technology compression cLGA D-Max® probing technology compression cLGA
Probe specifications
Input resistance

20 kΩ to Ground, typical

Input capacitance
P6860
P6910
1.3 pF
All others
0.5 pF
Minimum digital swing
TLA7AAx/TLA7ACx
P6910 P6860, P6960, P6962, P6964 P6980, P6982
150 mV single-ended 300 mV single-ended 150 mV differential each side
TLA7BBx/TLA7BCx
P6910 P6860, P6960, P6962, P6964 P6980, P6982
100 mV single-ended 200 mV single-ended 100 mV differential each side
Analog bandwidth 1
With TLA7Bxx module
3 GHz through iCapture™ to analog out BNCs
With TLA7ACx module
2 GHz through iCapture™ to analog out BNCs

1Analog bandwidth of the P6960 probe is less with the flying lead set attached.

Operating range
-2 V to +5 V
Maximum nondestructive voltage
±15 V
Cable length
1.8 m (6 ft.)
Last Modified: 2017-06-09 05:00:00
Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top