Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

Real-Time Spectrum Analyzer Software Options

Measurement Software Options for RSA3408A • RSA3303A • RSA3308A

Les produits figurant sur cette fiche technique ne sont plus vendus par Tektronix.
Référez-vous à Tektronix Encore pour les équipements de test reconditionnés.
Consultez l'assistance et les informations de garantie pour ces produits.

Measurement Software Options for RSA3408A • RSA3303A • RSA3308A

Features & Benefits

  • Trigger
    • Tektronix Exclusive Frequency Mask Trigger Makes Event-based Capture of Transient RF Signals Easy by Triggering on Any Change in the Frequency Domain
  • Capture
    • All Input Signals up to 36 MHz*1 Spans are Seamlessly Captured Into Memory
    • Long Record Length Enables Complete Analysis Over Time Without Making Multiple Acquisitions
    • Interfaces with TekConnect® Probes for RF and Baseband Probing
  • Analyze
    • Analyze Frequency, Amplitude, and Modulation Over Time
    • Multi-domain Analysis Enables Fast, Complete Signal Analysis in Frequency, Time, Code, and Modulation Domains
    • General Purpose Digital Modulation Analysis
    • 802.11a/b/g/n Measurement Suite
    • Codogram Provides a Simple, Graphical Means of Analyzing Individual Code Powers versus Time
    • Key Signaling Analysis Over Air Interface Enables Checking Interaction between Base station and UE
    • Signal Source Analysis Simplifies Phase Noise, Jitter, and Frequency Settling Measurements

Applications

    • W-CDMA
    • HSUPA
    • HSDPA
    • GSM/EDGE
    • CDMA2000 1x
    • CDMA2000 1xEV-DO
    • TD-SCDMA
    • RFID
    • Phase Noise
    • Jitter
    • IEEE 802.11 a/b/g/n WLAN
    • IEEE 802.15.4 OQPSK (Zigbee)
    • P25 (C4FM signal analysis )
    • Digital Modulation Analysis

*1 RSA3408A: 36 MHz RF, 40 MHz Baseband; RSA3300A: 15 MHz RF, 20 MHz Baseband.

Trigger, Capture, Analyze

See frequency, amplitude and modulation change over time. With only a single acquisition, Real-Time Spectrum Analyzers (RTSA) capture a continuous time record of changing RF events and enable time-correlated analysis in the Frequency, Time, and Modulation domains. You get the functionality of a vector signal analyzer, a wide band spectrum analyzer, plus the unique trigger-capture-analyze capability of RTSA — in one package. Optional application-focused software allows you to tailor the advanced characterization and troubleshooting tools of the RTSA to meet the needs of your specific application.

   

RSA3303/8A

RSA3408A

General Purpose Modulation

Opt. 21

Opt. 21

W-CDMA Uplink

   

Opt. 23

GSM/EDGE

   

Opt. 24

CDMA 1X Forward/Reverse Link

   

Opt. 25

1X EVDO Forward/Reverse Link

   

Opt. 26

3GPP Release 5 Downlink (HSDPA)

   

Opt. 27

3GPP Release 6 (HSUPA)*2

 

Opt. 40

TD-SCDMA

   

Opt. 28

WLAN 802.11a/b/g/n

   

Opt. 29

*2 For 3GPP Release 6 (HSUPA) analysis, opt 23, 27 are required in addition to opt 40.

Characteristics

Opt. 21 – Advanced Measurement Suite

Modulation Format - BPSK, QPSK, OQPSK, π/4 - DQPSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, GMSK, GFSK, ASK, FSK, DSB-ASK, OOK, PR-ASK, SSB-ASK, Subcarrier OOK, Subcarrier BPSK, C4FM (Fixed symbol rate).

Maximum Symbol Rate -  

RSA3408A: 51.2 MS/s

Parameter Presets - PDC, PHS, NADC, TETRA, GSM, CDPD, Bluetooth, IEEE 802.15.4 OQPSK (Zigbee), P25.

Vector Diagram Display Format - Symbol Locus Display, Frequency Error and Origin Offset Measurement.

Constellation Diagram Display Format - Symbol Display, Frequency Error and Origin Offset Measurement.

Eye Diagram Display Format - I/Q/Trellis Display (1 to 16 symbols).

Error Vector Diagram Display Format - EVM, Magnitude Error, Phase Error, Waveform Quality (ρ), Frequency Error, and Origin Offset Measurement.

Coding Format - NRZ-L (8 periods), NRZ-L (4 periods), NRZ-L (2 periods), PWM, Bit Cell, Miller, Modified Miller, Miller (M_2), Miller (M_4), Miller (M_8), Manchester, NRZ.

Symbol Table Display Format - Binary, Octal, Hexadecimal.

Signal Source Analysis - Phase Noise, Jitter, and Automated Frequency Settling Measurement.

RFID Standards - ISO/IEC 18000 Part 4 Mode 1.

ISO/IEC 18000 Part 6 Type A, B, C.

ISO/IEC 18092

ISO/IEC 14443 Part 2 Type A, B

EPC Global Generation 1 Class 0, Class 1

Digital Demodulation

GMSK (1 MHz Span) - EVM ≤1.8%, Magnitude Error ≤1.2%, Phase Error ≤1.0°

64QAM, 5.3 MS/s 1 GHz Carrier (15 MHz Span) - EVM ≤2.5% (typical).

QPSK, 3.84 MS/s 2 GHz Carrier (15 MHz Span) - EVM ≤2.5% (typical).

Characteristics

RSA3408A

QPSK EVM CF = 2 GHz (typical value)

0.5% (at 100 kS/s)

0.5% (at 1 MS/s)

0.6% (at 4 MS/s)

0.9% (at 10 MS/s)

Signal Source Analysis

STABILITY

RSA3408A

Noise Sidebands, dBc/Hz

Offset

At 1 GHz CF

At 2 GHz CF

At 6 GHz CF

 

Spec

Typical

Spec

Typical

Spec

Typical

1 kHz

-105

-107

-103

-105

-97

-99

10 kHz

-110

-112

-109

-111

-106

-108

20 kHz

-110

-112

-109

-111

-106

-108

30 kHz

-110

-112

-109

-111

-106

-108

100 kHz

-112

-115

-112

-115

-111

-113

1 MHz

-132

-135

-132

-135

-132

-134

5 MHz

-138

-140

-138

-140

-137

-139

7 MHz

-138

-140

-138

-140

-137

-139

10 MHz

-138

-140

-138

-140

-137

-139

STABILITY

RSA3308A/3303A

Noise Sidebands, dBc/Hz

Offset

At 1 GHz CF

At 2 GHz CF

At 6 GHz CF

 

Spec

Typical

Spec

Typical

Spec

Typical

1 kHz

-100

-107

-96

-99

-87

-90

10 kHz

-105

-112

-104

-107

-104

-107

20 kHz

-105

-112

-105

-108

-105

-108

30 kHz

-105

-112

-105

-108

-105

-108

100 kHz

-112

-115

-112

-115

-112

-115

1 MHz

-132

-135

-132

-135

-128

-131

5 MHz

-135

-140

-135

-138

-130

-133

7 MHz

-135

-140

-135

-138

-130

-133

Frequency Settling Time

RSA3408A (typical)

Input Power - –5 dBm

RF Attenuator - 0 dB

Smoothing Factor - 1

Span - ≥10 MHz

Input Frequency - 100 MHz – 101 MHz

Frequency Settling Threshold - 100 kHz

Span - 100 kHz

Input Frequency - 10 MHz – 10.01 MHz

Frequency Settling Threshold - 1 kHz

Span (Hz)

Error Frequency Settling Time

Error Frequency Settling Time From Trigger

36 MHz

60 ns

100 ns

10 MHz

240 ns

240 ns

100 KHz

19 μs

19 μs

RSA3300A Series (typical)

Input Power - –5 dBm

RF Attenuator - 0 dB

Smoothing Factor - 1

Span - ≥10 MHz

Input Frequency - 100 MHz – 101 MHz

Frequency Settling Threshold - 100 KHz

Span - 100 kHz

Input Frequency - 10 MHz – 10.01 MHz

Frequency Settling Threshold - 1 kHz

Span (Hz)

Error Frequency Settling Time (S)

Error Frequency Settling Time From Trigger (S)

15 MHz

160 ns

40 ns

10 MHz

240 ns

80 ns

100 kHz

19 μs

13 μs

Opt. 23 - W-CDMA Uplink Analysis

Perform key measurements for 3GPP TS34.121 including PRACH analysis capability.

Supports the following measurements - Constellation, EVM, Eye Diagram, Symbol Table, CDP Spectrogram, CDP vs. Short Code, CDP vs. Symbol, CDP vs. Time Slot, Symbol Constellation, Symbol EVM, Symbol Eye Diagram.

Supports W-CDMA uplink signals - DPDCH 9 Dedicated Physical Data Channel/DPCCH (Dedicated Physical Control Channel), PRACH (Physical Random Access Data Channel), PCPCH (Physical Common Packet Channel).

Opt. 24 - GSM/EDGE Analysis Software

Perform key measurements for ETSI TS 100 910 and 3GPP TS45.005.

Burst Type: Normal

Characteristics

Description

Modulation accuracy measurement

Mean power measurement

Power versus time measurement

Modulation spectrum measurement

Switching spectrum measurement

Carrier power range

–30 to +30 dBm

Phase error measurement accuracy for GMSK modulation (typical)

≤0.8° (RMS)

≤1.8° (Peak)

Phase error resolution

0.01°

EVM measurement accuracy for 8-PSK modulation (typical)

≤0.9% (RMS)

EVM resolution

0.01%

Time resolution

0.15625 μs at 5 MHz span

Burst count

1000 maximum

RF input range

-50 dBm to +30 dBm

Absolute power measurement accuracy for GSM900 at 20 °C to 30 °C, excluding mismatch error (typical)

±0.5 dB

Signal frequency: 880 MHz – 960 MHz, Signal power: +10 dBm to –30 dBm, RF attenuator: 0 dB – 20 dB, after auto level is performed at 5 MHz span

Absolute power measurement accuracy for DCS1800/PCS1900 at 20 °C to 30 °C, excluding mismatch error (typical)

±0.6 dB

Signal frequency: 1710 MHz – 1990 MHz, Signal power: +10 dBm to –30 dBm, RF attenuator: 0 dB to 20 dB, after auto level is performed at 5 MHz span

Resolution

0.01 dB

Burst count

1000 maximum

RF input range

–50 dBm to +30 dBm

Power ramp relative accuracy (typical)

±0.2 dB at 0 dBfs to –40 dBfs

Time resolution (typical)

0.15625 μs at 5 MHz span

Marker amplitude resolution

0.001 dB

Burst count

1000 maximum

Carrier power range

–5 dBm to +30 dBm

Dynamic range for GMSK modulation (typical)

82 dB at 600 kHz offset (30 kHz RBW)

86 dB at 1.2 MHz offset (30 kHz RBW)

83 dB at 1.8 MHz offset (100 kHz RBW)

85 dB at 6 MHz offset (100 kHz RBW)

Dynamic range for 8-PSK modulation (typical)

82 dB at 600 kHz offset (30 kHz RBW)

85 dB at 1.2 MHz offset (30 kHz RBW)

83 dB at 1.8 MHz offset (100 kHz RBW)

83 dB at 6 MHz offset (100 kHz RBW)

Burst count

1000 maximum

Carrier power range

–5 dBm to +30 dBm

Dynamic range for GMSK modulation (typical)

75 dB at 400 kHz offset (30 kHz RBW)

80 dB at 600 kHz offset (30 kHz RBW)

84 dB at 1.2 MHz offset (30 kHz RBW)

88 dB at 1.8 MHz offset (30 kHz RBW)

Dynamic range for 8-PSK modulation (typical)

75 dB at 400 kHz offset (30 kHz RBW)

80 dB at 600 kHz offset (30 kHz RBW)

84 dB at 1.2 MHz offset (30 kHz RBW)

88 dB at 1.8 MHz offset (30 kHz RBW)

Burst count

1000 maximum

Opt. 25 – cdma2000 1xSignal Analysis Software

Perform key measurements for cdma2000 forward link (3GPP2 C.S0010) and reverse link (3GPP2 C.S0011).

cdma2000 1x Forward Link

Characteristics

Description

ACPR

CCDF

Intermodulation distortion

Occupied bandwidth

Spectrum emission mask

Code domain power

QPSK EVM

Modulation Accuracy (composite)

Channel power

Minimum power at RF input

–50 dBm

Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.6 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz, Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span.

Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.2 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz, Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span, 0 dBm input.

Resolution

0.01 dB

Minimum carrier power at RF input

–40 dBm

Dynamic range

765 kHz offset

1.995 MHz offset

3.125 MHz offset

4 MHz offset

At –5 dBm signal input

76 dB (30 kHz BW)

81 dB (30 kHz BW)

81 dB (30 kHz BW)

82 dB (30 kHz BW)

Histogram resolution

0.01 dB

Measurement filter

Rectangular, Root Nyquist, Nyquist, and Gaussian

Minimum carrier power at RF input

–50 dBm

Measurement accuracy

0.2%

Minimum carrier power at RF input

–5 dBm

Dynamic range

1.995 MHz offset

82 dB (30 kHz BW)

Relative code domain power accuracy

±0.15 dB/±0.075 dB (typical)

Minimum carrier power at RF input

–40 dBm

EVM floor, typical

2.0%

Minimum carrier power at RF input

–40 dBm

Composite EVM floor, typical

2.0%

Rho (ρ)

0.999

Frequency error accuracy

±10 Hz + center frequency accuracy

Timing accuracy (tau)

±250 ns

cdma2000 1x Reverse Link

Characteristics

Description

Channel power

ACPR

CCDF

Occupied bandwidth

Spectrum emission mask

Code domain power

QPSK EVM

Modulation Accuracy (composite)

Minimum power at RF input

–50 dBm

Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.6 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span.

Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.2 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to -30 dBm after auto level is performed at 10 MHz span, 0 dBm input.

Resolution

0.01 dB

Minimum carrier power at RF input

–40 dBm

Dynamic range

900 kHz offset

1.995 MHz offset

3.125 MHz offset

4 MHz offset

At –5 dBm signal input

76 dB (30 kHz BW)

81 dB (30 kHz BW)

81 dB (30 kHz BW)

82 dB (30 kHz BW)

Histogram resolution

0.01 dB

Intermodulation distortion

Measurement filter

Rectangular, Root Nyquist, Nyquist, and Gaussian

Minimum carrier power at RF input

–50 dBm

Measurement accuracy

0.2%

Minimum carrier power at RF input

–5 dBm

Dynamic range

1.995 MHz offset

82 dB (30 kHz BW)

Relative code domain power accuracy

±0.15 dB/±0.075 dB (typical)

Minimum carrier power at RF input

–40 dBm

EVM floor, typical

2.0%

Minimum carrier power at RF input

–40 dBm

Composite EVM floor, typical

2.0%

Rho (ρ)

0.999

Frequency error accuracy

±10 Hz + center frequency accuracy

Opt. 26 – 1xEV-DO Signal Analysis Software

Perform key measurements for 1xEV-DO forward link (3GPP2 C.S0032) and reverse link (3GPP2 C.S0033).

1xEV-DO Forward Link

Characteristics

Description

Channel power

CCDF

Intermodulation distortion

Occupied bandwidth

ACPR

Spectrum emission mask

QPSK EVM

Modulation Accuracy (composite)

Minimum power at RF input

–50 dBm

Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.6 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span.

Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical

±0.2 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to -30 dBm after auto level is performed at 10 MHz span, 0 dBm input.

Resolution

0.01 dB

Histogram resolution

0.01 dB

Measurement filter

Rectangular, Root Nyquist, Nyquist, and Gaussian

Minimum carrier power at RF input

–50 dBm

Measurement accuracy

0.2%

Minimum carrier power at RF input

–40 dBm

Dynamic range

765 kHz offset

1.995 MHz offset

3.125 MHz offset

4 MHz offset

At –5 dBm signal input

76 dB (30 kHz BW)

81 dB (30 kHz BW)

81 dB (30 kHz BW)

82 dB (30 kHz BW)

Minimum carrier power at RF input

–5 dBm

Dynamic range

1.995 MHz offset

82 dB (30 kHz BW)

Code domain power

Relative code domain power accuracy

±0.15 dB/±0.075 dB (typical)

Minimum carrier power at RF input

–40 dBm

EVM floor, typical

2.0%

Minimum carrier power at RF input

–40 dBm

Composite EVM floor, typical

2.0%

Rho (ρ)

0.999

Frequency error accuracy

±10 Hz + center frequency accuracy

Timing accuracy (tau)

±250 ns

1xEV-DO Reverse Link

Characteristics

Description

Channel power

CCDF

Intermodulation distortion

Occupied bandwidth

Spectrum emission mask

Code domain power

Modulation Accuracy (composite)

Minimum power at RF input

–50 dBm

Absolute power measurement accuracy (at 20 to 30 °C, excluding mismatch error), typical

±0.6 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span.

Relative power measurement accuracy (at 20 to 30 °C, excluding mismatch error), typical

±0.2 dB at conditions below:

Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz

Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span, 0 dBm input.

Resolution

0.01 dB

Histogram resolution

0.01 dB

Measurement filter

Rectangular, Root Nyquist, Nyquist, and Gaussian

Minimum carrier power at RF input

–50 dBm

Measurement accuracy

0.2%

ACPR

Minimum carrier power at RF input

–40 dBm

Dynamic range

765 kHz offset

1.995 MHz offset

3.125 MHz offset

4 MHz offset

At –5 dBm signal input

74 dB (30 kHz BW)

83 dB (30 kHz BW)

83 dB (30 kHz BW)

84 dB (30 kHz BW)

Minimum carrier power at RF input

–5 dBm

Dynamic range

1.995 MHz offset

 

82 dB (30 kHz BW)

Relative code domain power accuracy

±0.15 dB/±0.075 dB (typical)

QPSK EVM

   

Minimum carrier power at RF input

–40 dBm

EVM floor, typical

2.0%

Minimum carrier power at RF input

–40 dB

Composite EVM floor, typical

2.0%

Rho (ρ)

0.999

Frequency error accuracy

±10 Hz + center frequency accuracy

Opt. 27 – 3GPP Release 5 Downlink (HSDPA) Analysis Software

Perform key measurements for 3GPP TS25.141 v5.7.0

3GPP-R5 Downlink

Characteristics

Description

Channel power measurement

ACLR measurement

Modulation Format

QPSK, 16QAM auto detection

Minimum power at RF input

–50 dBm

Absolute power measurement accuracy (typical)

±0.6 dB at 20 °C to 30 °C, excluding mismatch error

Signal frequency: 1900 – 2200 MHz

Signal power: +10 dBm to –30 dBm after auto level is performed at 10 MHz span.

Relative Power Measurement Accuracy (typical)

±0.2 dB at 20 °C to 30 °C, excluding mismatch error

Signal frequency: 1900 – 2200 MHz

Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span.

Resolution

0.01 dB

Minimum carrier power at RF input

–40 dBm

Dynamic range

Test model 1, 16 ch, input power >–5 dBm

60 dB, typically 66 dB (5 MHz offset)

63 dB, typically 70 dB (10 MHz offset)

CCDF measurement

Histogram Resolution

0.01 dB

OBW (Occupied Bandwidth) measurement

Minimum carrier power at RF input

–50 dBm

Measurement accuracy

0.2% (5 MHz Span, 1000 times averaging)

Spectrum emission mask

Dynamic range

82 dB (30 kHz BW, Input Power >–5 dBm, 5 MHz offset)

Code domain power

Relative accuracy of code domain power accuracy

±0.15 dB, typically ±0.075 dB

Using Test Model 5, Total Power = 0 dBm, Code Level >–15 dB

QPSK EVM (Pilot Channel Only)

   

Minimum carrier power at RF input

–60 dBm (EVM <9 %)

EVM floor (typical)

2.0%

(Input Power >–40 dBm, 10 times averaged)

Modulation Accuracy (Composite, Test Model 5)

Minimum carrier power at RF input

–60 dBm (EVM < 9%)

Composite EVM floor (typical)

2.5 % (Input Power > –40 dBm, 10 times averaged)

Frequency error accuracy

±10 Hz + (center frequency accuracy)

Modulation accuracy (Composite, Alternate Scrambling Code)

Minimum carrier power at RF input

–60 dBm (EVM <9%)

Composite EVM floor (typical)

2.5% (Input Power >–40 dBm, 10 times averaged)

Frequency error accuracy

±10 Hz + (center frequency accuracy)

3GPP-R5 Uplink

Characteristics

Description

ACK/NACK Analysis

Code domain power

ACK/NACK Analysis Function

ACK/NACK/DTX detection, CQI decode

Relative accuracy of code domain power accuracy

±0.15 dB, typically ±0.075 dB (Total Power = 0 dBm, Code Level >–15 dB )

Opt. 28 – 3GPP Release 4 Downlink and Uplink (TD-SCDMA)

Perform key measurements for TS25.102 (UL), 3GPP TS25.142 (DL)

Characteristics

Description

General

Channel power measurement

ACLR Measurement

CCDF Measurement

Code domain analysis

Modulation and frequency related

Frequency range

1850 – 2050 MHz

Minimum power at RF input

–60 dBm

Absolute power measurement accuracy (typical, after auto-level performed, excluding mismatch error, 5 MHz span)

±0.6 dB (Signal power +10 dBm to –30 dBm, 20 to 30 °C)

Relative power measurement accuracy (typical, after auto-level performed, excluding mismatch error, 5 MHz span)

±0.2 dB (Signal power +0 dBm to –30 dBm, 20 to 30 °C)

Resolution

0.01 dB

Dynamic range

(8 active DPCH, Timeslots 4, 5, 6), input power >–20 dBm

60 dB, 1.6 MHz offset

61 dB, 3.2 MHz offset

Histogram resolution

0.01 dB

Relative code domain power accuracy

Input power > –40 dBm

±0.15 dB (±0.075 typical) at code power >–10 dBc ±0.30 dB (±0.15 typical) at code power >–25 dBc

Code domain residual error

<–40 dB (Input power >–40 dBm)

Modulation format

QPSK

Residual EVM floor

≤1.5%, input level >–40 dBm (1 DPCH in timeslots 4, 5, and 6)

Residual origin offset

≤–40 dB, input level >–40 dBm (1 DPCH in timeslots 4, 5, and 6)

Frequency error accuracy

±10 Hz + (center frequency accuracy)

Frequency lock range

±4 kHz from defined carrier frequency (input level >–40 dBm)

Other measurements

Occupied BW (OBW)

Spectrum Emissions Mask (offset from carrier and inband, ungated)

Opt. 29 – IEEE 802.11 a/b/g/n Analysis Software

Characteristics

Description

Residual EVM for IEEE802.11a/g/n 54 Mb/s OFDM (typical)

≤–44 dB at 2.447 GHz center frequency,

≤–42 dB at 5.5 GHz center frequency

Residual EVM for IEEE802.11b 11 Mbps CCK with Raised cosine filter (typical)

≤0.7% at 2.447 GHz center frequency

Residual EVM against Frequency Offset (±10 MHz), OFDM signal conforming to IEEE802.11g, 16.6 MHz BW, 52 sub carriers, 64 QAM, 54 Mb/s, with long training symbol correction (typical)

≤–41 dB, Center Frequency of the Analyzer is 5.0 to 6.0 GHz, Carrier Center is ±10 MHz apart from the Center Frequency setting

Residual EVM for Draft IEEE 802.11n SISO in Green Mode using 16QAM and Long Training Symbol1 (typical)

≤–46 dB at 2.447 GHz center frequency and 20 MHz bandwidth

≤–42 dB at 2.447 GHz center frequency and 40 MHz bandwidth

Residual EVM for Draft IEEE 802.11n MIMO in Green Mode using 16QAM and Long Training Symbol1 (typical)

≤–42 dB at 2.447 GHz center frequency, 20 MHz bandwidth and channel model A

≤–44 dB at 2.447 GHz center frequency, 20 MHz bandwidth and channel model B

≤–42 dB at 2.447 GHz center frequency, 40 MHz bandwidth and channel model A

≤–41 dB at 2.447 GHz center frequency, 40 MHz bandwidth and channel model B

*1 Measurement performance for RSA3408A only.

 

IEEE 802.11 Measurements

Measurements

Measurement Contents

802.11a

802.11b

802.11g

802.11n

Power Analysis

   

   

   

   

   

Transmission Analysis

   

   

   

   

   

Modulation Analysis

   

   

   

   

   

EVM vs. Time

EVM

X

X

X

X

   

Magnitude Error

X

X

X

X

   

Phase Error

X

X

X

X

Power vs. Time

X

X

X

X

Constellation

X

X

X

X

EVM vs. SC

EVM

X

X

X

X

   

Magnitude Error

X

X

X

X

   

Phase Error

X

X

X

X

Power vs. SC

X

X

X

X

SC Constellation

X

X

X

X

Frequency Error

X

X

X

X

OFDM Flatness

X

X

X (SISO only)

OFDM Linearity

X

X

X (SISO only)

Symbol Table

X

X

X

X

2 x 2 MIMO Signal Analysis

X

Spectrum Mask

X

X

X

Transmit Power

X

X

Transfer Function vs. Time

X

Delay Profile vs. Time

X

Opt. 40 – 3GPP Release 6 (HSUPA) Analysis Software

Perform key measurements for 3GPP TS25.211 v6.7.0, TS25.212 v6.8.0, TS25.213 v6.5.0

3GPP-R6 Uplink

Characteristics

Description

Code domain power

Modulation Accuracy (Configuration 2)

Modulation Format

Channel detection, IQ split analysis

Channel power measurement

   

Minimum power at RF input

–50 dBm

Relative Power Measurement Accuracy (typical)

±0.2 dB at 20 °C to 30 °C, excluding mismatch error

Signal frequency: 1900 – 2200 MHz

Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span.

Resolution

0.01 dB

Relative accuracy of code domain power accuracy

±0.15 dB, typically ±0.075 dB

Using Configuration 2, Total Power = 0 dBm, Code Level >–15 dB

QPSK EVM (Pilot Channel Only)

   

Minimum carrier power at RF input

–60 dBm (EVM <9 %)

EVM floor (typical)

2.0%

(Input Power >–40 dBm, 10 times averaged)

Minimum carrier power at RF input

–60 dBm (EVM < 9%)

Composite EVM floor (typical)

2.5 % (Input Power > –40 dBm, 10 times averaged)

Frequency error accuracy

±10 Hz + (center frequency accuracy)

 

3GPP-R6 Uplink and Downlink Analysis

Characteristics

Description

Uplink

   

Uplink Signaling Analysis

   

Downlink

   

Downlink Signaling Analysis

   

Phase discontinuity

Result of Phase Discontinuity in accordance with 3GPP standard TS25.101(V6.9.0) 6.8.4

Gain Ratio over time

Power ratio % over time

Modulation Accuracy over Time

EVM, Mag error, Phase error, PCDE, Frequency error, Origin offset, Phase discontinuity over time

HS-DPCCH Analysis

ACK/NACK/PRE/POST/DTX detection, CQI decode

E-DPCCH Analysis

RSN/E-TFCI/HAPPY decode

DPCCH

TPC, TFCI decode

Modulation Accuracy over Time

EVM, Mag error, Phase error, PCDE, Frequency error, Origin offset over time

E-RGCH (E - Relative Grant Channel) Analysis

UP/HOLD/DOWN detection

E-HICH (E–Hybrid ARQ Indicator Channel) Analysis

ACK/NACK decode

E-AGCH Analysis

AGV/AGS decode

Ordering Information

RSA3408A

Product Options

Opt. 21 - Advanced Measurement Suite Software.

Opt. 23 - W-CDMA Uplink Analysis Software.

Opt. 24 - GSM/EDGE Analysis Software.

Opt. 25 - cdma2000 1x Analysis Software.

Opt. 26 - 1xEV-DO Analysis Software.

Opt. 27 - 3GPP Release 5 Downlink (HSDPA) Analysis Software.

Opt. 28 - TD-SCDMA Analysis Software.

Opt. 29 - WLAN 802.11 a/b/g/n Analysis Software.

Opt. 40 - 3GPP Release 6 (HSUPA) Analysis Software*3.

*3 Options 23 and 27 are required for 3GPP Release 6 analysis in addition to Opt. 40

Upgrade Options

RSA34UP21 - Advanced Measurement Suite Upgrade (customer-installable).

RSA34UP23 - W-CDMA Uplink Analysis Upgrade (customer-installable).

RSA34UP24 - GSM/EDGE Analysis Upgrade (customer-installable).

RSA34UP25 - cdma2000 1x Analysis Upgrade (customer-installable).

RSA34UP26 - 1xEV-DO Analysis Upgrade (customer-installable).

RSA34UP27 - 3GPP Release 5 Downlink (HSDPA) Analysis Upgrade (customer-installable).

RSA34UP28 - TD-SCDMA Analysis Upgrade (customer-installable).

RSA34UP29 - WLAN 802.11 a/b/g/n Analysis Upgrade (customer-installable).

RSA34UP40 - 3GPP Release 6 (HSUPA) Analysis Software Upgrade (customer-installable)*4.

*4 Options 23 and 27 are required for 3GPP Release 6 analysis in addition to Opt. 40

RSA3303A, RSA3308A

Product Options

Opt. 21 - Advanced Measurement Suite Software.

Upgrade Options

RSA3UP21 - Advanced Measurement Suite Upgrade (customer-installable).