Automobile

Tester les véhicules actuels comme les véhicules de demain

Les voitures actuelles embarquent des composants électroniques plus sensibles et sophistiqués que jamais. Les véhicules sont par conséquent plus sûrs, plus efficaces et plus connectés. Mais ceci pose de nouveaux défis en matière de test et de validation :

  • Débogage et vérification des réseaux CAN FD, CAN, LIN, FlexRay, BroadR-Reach et MOST
  • Test haute puissance pour véhicules hybrides ou électriques
  • Vérification des systèmes sans fil embarqués des véhicules
  • Évaluation de nouveaux composants, comme les capteurs MEMS, les pilotes LED et les LED
  • Dépannage et test des interférences électromagnétiques (EMI)

Le point de départ de votre feuille de route vers des tests automobiles fiables, efficaces et complets.

Équipement recommandé Contenu sélectionné

Bibliothèque

Title
Physical Layer Compliance Testing for 100BASE-TX

This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

High Amplitude Arbitrary/Function Generator Simplifies Measurement in Automotive, Semiconductor, Scientific and Industrial Applications

This application note describes the conventional approach of generating high amplitude signals with an external amplifier. It then discusses typical applications and shows the benefits of using a novel arbitrary/function generator with integrated high amplitude stage. Applications described in this note include measuring the timing and switching characteristics of power semiconductors for automotive applications and the characterization of amplifiers for gas chromatography detectors.

Debugging CAN, LIN and FlexRay Automotive Buses with an Oscilloscope

Explains the physical layer basics of CAN, LIN, and FlexRay serial buses to troubleshoot bus problems or system issues.  Learn how to use automated decoding, triggering, and search on an oscilloscope equipped with automotive bus analysis capability.

Fundamentals of Signal Integrity Primer

This primer is to provide some insight into signal integrity-related problems in digital systems, and to describe their causes, characteristics, effects and solutions.

Debugging Serial Buses in Embedded System Designs

Learn the basics of the hardware protocols of the most common serial buses. Find out how to use the protocol trigger, decode and search capabilities of oscilloscopes to solve serial bus integration and debug challenges.

Using the Arbitrary Waveform Capabilities of the Series 2600B and Series 2650A System SourceMeter SMU Instruments to Perform Ford EMC Power Cycling Testing

Learn how to use a Source Measure Unit (SMU) with high-current arbitrary waveform capability for automotive power cycling testing. This app note describes a detailed procedure for performing Ford EMC-CS-2009.1 CI 230 Power Cycling Testing using the Keithley Series 2600B or Series 2650A System SourceMeter SMU instruments. 

This vides shows how to set up automated CAN or CAN FD bus decoding, triggering,…

2:22

Learn how MSO/DPO3000 Series oscilloscopes and the optional DPO3AUTO application…

2:40

In this short video, we demo the CAN FD bus decoding process on the flexible…

4:28
Titre
Meeting Test Demands of Automotive LiDAR and Radar

Understanding real-world operating environments around the vehicle becomes critical to delivering automotive solutions that enable better and safer decisions. Creating accurate and reliable tests to prove safety under a variety of test conditions is key. Watch this webinar to learn more.

Title
MOST Essentials – Electrical Compliance and Debug Test Solution for MOST50 and MOST150 (MOI)

This document provides the Methods of Implementation for making MOST measurements with Tektronix oscilloscopes enabled with option DJA, option MOST.

Téléchargements
Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

Go to top